Wraps by car

Rolls-Royce 20/25 wrap

The Rolls-Royce 20/25 wrap page covers the 1929–1936 first generation, the only generation in the catalog. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) for the convertible to 61 ft (18.5 m) for the sedan with 60-inch (1.52 m) cast film. The measured lengths come from the factory body dimensions and real panel layouts.

1generations17.5 mof film for a full wrap

Rolls-Royce 20/25, first generation, factory photo
Rolls-Royce 20/25, first generation. Factory color shown.

Rolls-Royce 20/25 wrap colors and ideas

  • 20/25 black wrap
  • 20/25 white wrap
  • 20/25 gray wrap
  • 20/25 silver wrap
  • 20/25 red wrap
  • 20/25 blue wrap
  • 20/25 green wrap
  • 20/25 yellow wrap
  • 20/25 orange wrap
  • 20/25 purple wrap
  • 20/25 pink wrap
  • 20/25 teal wrap
  • 20/25 brown wrap
  • 20/25 gold wrap
  • 20/25 chrome wrap
  • 20/25 color shift wrap
  • 20/25 carbon fiber wrap
  • 20/25 camo and patterned wrap

How much vinyl to wrap a Rolls-Royce 20/25

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1929–1936convertible, coupe, sedan (2 or 4 doors)191.0 in (4,851 mm)about 57 ft (17.5 m) for the convertible to 61 ft (18.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

20/25 wrap cost factors

Rolls-Royce 20/25 wrap cost depends mainly on the body style among the convertible, coupe and sedan, because each one has a different amount of painted surface to cover. The length of 191.0 in (4,851 mm) and the film estimate of about 57 ft (17.5 m) to 61 ft (18.5 m) set the material quantity, while the number of doors changes the labor for cut lines and handle reliefs. A chrome delete or a patterned film that reaches up to about 69 ft (21 m) adds more film and more trimming time. The age and condition of the original paint also affect how much preparation the panels need before the wrap goes on.

  • Film for a full wrap: about 57 ft (17.5 m) for the convertible to 61 ft (18.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

20/25 wraps by generation

Swipe sideways. Tap a card for the full description.

Rolls-Royce 20/25, first generation, factory photo
Factory color shown

1929–1936 20/25 convertible, coupe, sedan (first generation)

1929–1936convertible, coupe, sedan (2 or 4 doors)191.0 in (4,851 mm)

On the first generation Rolls-Royce 20/25, the open top is not covered with vinyl film. A fabric top is left as it is and the wrap ends cleanly where the painted body meets the top material. If the car has a folding hard top, that top is wrapped as its own set of panels, and the film is cut to move with the hinges. This keeps the wrap from lifting at the edges of the top well and leaves the convertible look intact.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 57 ft (17.5 m) for the convertible to 61 ft (18.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a 20/25

A partial wrap on a Rolls-Royce 20/25 can cover just the roof, hood or mirror caps for a color accent without a full color change wrap. A chrome delete on the window trim and badges replaces bright parts with black film, and it is often combined with a partial wrap on the body. Paint protection film (PPF) as a clear film on the front end shields the nose and fender tips from stone chips. Each of these smaller jobs uses only the film needed for the chosen panels, so the material comes to much less than the full 57 ft (17.5 m) to 61 ft (18.5 m) estimate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Rolls-Royce 20/25: body, cut-outs and film

A Rolls-Royce 20/25 vinyl wrap starts from the body style: this car was built as a convertible, coupe or sedan with 2 or 4 doors, and its length is 191.0 in (4,851 mm). A longer sedan has more painted surface than a coupe, so it uses film closer to the 61 ft (18.5 m) figure than to the 57 ft (17.5 m) figure of a convertible. The door count changes the number of cut lines and how film is split across the rocker panels. A wrap shop plans each panel from the actual car, because coachbuilt bodies of this era vary from one example to another.

20/25 wrap ideas begin with the large, flat panels that make this car a practical candidate for a color change wrap. The bright trim around the windows and the grille surround can be covered with black film in a chrome delete, while the door handles and badges are small detailed parts that a shop removes or masks. The running boards and the lower body sections take the most abuse and benefit from extra film when they are wrapped. The front fenders on many examples are separate bolt-on parts, so they are wrapped off the car for cleaner edges.

How much vinyl to wrap a 20/25 depends on which coachbuilt body is on the chassis, because the catalog lists one generation with convertible, coupe and sedan styles. The film estimate for the 1929–1936 first generation runs from about 57 ft (17.5 m) for the convertible to 61 ft (18.5 m) for the sedan with 60-inch (1.52 m) cast film. A convertible with a folding hard top adds separate panel work, which can push the total toward the higher figure. Anyone counting film should order the full 61 ft (18.5 m) and trim on the car, since the difference between bodies is only about 4 ft (1 m).

Questions about wrapping a Rolls-Royce 20/25

How much vinyl does it take to wrap a Rolls-Royce 20/25?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a Rolls-Royce 20/25 convertible, and about 61 ft (18.5 m) for a sedan. The range comes from the body styles in the 1929–1936 first generation. A patterned film or one with chrome finishes can push the total to about 69 ft (21 m) because of pattern matching.

Is the top of a 20/25 wrapped?

No, the fabric top of a 20/25 is not wrapped. The vinyl film ends where the painted body meets the top material, and a folding hard top is wrapped as its own panels. Leaving the fabric top unwrapped keeps the original look and avoids adhesive problems on the soft material.

Which 20/25 body takes more film?

The sedan takes more film than a convertible or coupe 20/25. The estimate for the sedan is about 61 ft (18.5 m), while the convertible starts at about 57 ft (17.5 m) with the same 60-inch (1.52 m) cast film. The longer closed body has more painted roof and rear panel area to cover.

Can I wrap only the hood or the roof of a 20/25?

Yes, you can wrap only the hood or the roof of a 20/25 as a partial wrap. A shop can also do the mirror caps, a chrome delete on the window trim and badges, or apply clear paint protection film (PPF) to the front end. These smaller jobs use less film than the full wrap estimate of 57 ft (17.5 m) to 61 ft (18.5 m).