Wraps by car

Rolls-Royce Ghost wrap

The Rolls-Royce Ghost wrap page covers both generations of this luxury sedan, from 2009 to the present. A full vinyl wrap of the newest body requires about 69 ft (21 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 80 ft (24.5 m). The first generation needs slightly less film, about 67 ft (20.5 m) of cast film.

2generations21 mof film for a full wrap

Rolls-Royce Ghost, second generation, factory photo
Rolls-Royce Ghost, second generation. Factory color shown.

Rolls-Royce Ghost wrap colors and ideas

  • Ghost black wrap
  • Ghost white wrap
  • Ghost gray wrap
  • Ghost silver wrap
  • Ghost red wrap
  • Ghost blue wrap
  • Ghost green wrap
  • Ghost yellow wrap
  • Ghost orange wrap
  • Ghost purple wrap
  • Ghost pink wrap
  • Ghost teal wrap
  • Ghost brown wrap
  • Ghost gold wrap
  • Ghost chrome wrap
  • Ghost color shift wrap
  • Ghost carbon fiber wrap
  • Ghost camo and patterned wrap

How much vinyl to wrap a Rolls-Royce Ghost

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowsedan (4 doors)218.3 in (5,546 mm) to 225.0 in (5,716 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
2009–2020sedan (4 doors)212.6 in (5,399 mm) to 219.3 in (5,569 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

Ghost wrap cost factors

Ghost wrap cost depends on the size of the car, the film chosen, and the number of cut-outs. The long body, up to 225.0 in (5,716 mm), takes more material and time than a smaller sedan. Chrome or patterned film adds about 11 ft (3.4 m) to the film estimate compared to solid cast film. Parking sensors and cameras on every second-generation trim mean extra precision work that affects labor.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: sedan (4 doors).
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Ghost wraps by generation

Swipe sideways. Tap a card for the full description.

Rolls-Royce Ghost, second generation, factory photo
Factory color shown

2020–now Ghost sedan (second generation)

2020–nowsedan (4 doors)218.3 in (5,546 mm) to 225.0 in (5,716 mm)

The second-generation Ghost was restyled in 2024 with new bumpers and lights. Film cut for a 2020–2023 Ghost does not fit the 2024–now version because the sensor and camera positions changed. Installers must use patterns specific to each version of this body. The overall length changed little, but the front and rear details are different.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Rolls-Royce Ghost, first generation, factory photo
Factory color shown

2009–2020 Ghost sedan (first generation)

2009–2020sedan (4 doors)212.6 in (5,399 mm) to 219.3 in (5,569 mm)

The first-generation Ghost, built from 2009 to 2020, may have original or repainted panels. Paint age matters because older paint can lift when film is removed, and a test spot is done before a full wrap. The 2014 restyling changed the front and rear, so film cuts differ for 2009–2013 and 2014–2020 cars. A careful inspection of the paint condition is part of the wrap process.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Ghost

A partial wrap on a Ghost covers the roof, hood, or mirror caps instead of the whole car. Ghost chrome delete wraps the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap and focus on specific areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Rolls-Royce Ghost: body, cut-outs and film

A Rolls-Royce Ghost vinyl wrap must follow the long sedan body and its large, flat panels. The second generation measures 218.3 in (5,546 mm) to 225.0 in (5,716 mm), while the first generation is 212.6 in (5,399 mm) to 219.3 in (5,569 mm). Every panel is wrapped in one piece where possible, so the installer works with wide 60-inch film. The four-door sedan shape means long roof and side sections that demand careful handling.

Ghost wrap ideas begin with the factory features that need cut-outs. Every trim of the second generation has parking sensors in the bumpers, and the film is cut around each sensor. Cameras in the body also require precise cut-outs around each lens. The first generation may have a panoramic glass roof or a sunroof, and glass is never wrapped; the film ends at the roof rails or is cut around the opening.

How much vinyl to wrap a Ghost depends on the generation and the film type. The second generation uses about 69 ft (21 m) of cast film, but chrome or patterned film needs about 80 ft (24.5 m). The first generation is slightly smaller, needing about 67 ft (20.5 m) of cast film or 77 ft (23.5 m) of chrome or patterned film. A restyling within a generation does not change the overall amount, only the bumper and light cut-outs.

Questions about wrapping a Rolls-Royce Ghost

How much vinyl does it take to wrap a Rolls-Royce Ghost?

It takes about 69 ft (21 m) of 60-inch (1.52 m) cast film to wrap a Rolls-Royce Ghost of the newest body, 2020–now. If you use chrome or patterned film, the amount rises to about 80 ft (24.5 m). The first generation, 2009–2020, needs slightly less: about 67 ft (20.5 m) of cast film or 77 ft (23.5 m) of chrome or patterned film. These figures are for a full color change wrap.

Which years of the Ghost take the same film cuts?

The Ghost years that take the same film cuts are 2020–2023, then 2024–now, and separately 2009–2013, then 2014–2020. The second generation had a restyling in 2024 that changed the bumpers and lights, so cuts differ. The first generation was restyled in 2014, altering the front and rear. Within each period, the film patterns match.

Can I wrap only the hood or the roof of a Ghost?

Yes, you can wrap only the hood or the roof of a Ghost. Partial wraps on this car often include the roof, hood, or mirror caps. The roof of a first-generation Ghost with a panoramic glass roof is not wrapped; the film ends at the roof rails. A sunroof means the film is cut around its opening.

Is a Ghost hard to wrap?

A Ghost is not especially hard to wrap, but its size and sensors add work. The long body, up to 225.0 in (5,716 mm), requires large pieces of film handled carefully. Every second-generation trim has parking sensors and cameras that need cut-outs. First-generation trims may have fog lamps or a sunroof that also require cut-outs.