Wraps by car

Rolls-Royce Silver Wraith wrap

This page covers the Rolls-Royce Silver Wraith wrap in vinyl film. The Silver Wraith appeared in two generations: the first from 1946 to 1959 and the second from 1975 to 1980. A full wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

2generations19.5 mof film for a full wrap

Rolls-Royce Silver Wraith, second generation, factory photo
Rolls-Royce Silver Wraith, second generation. Factory color shown.

Rolls-Royce Silver Wraith wrap colors and ideas

  • Silver Wraith black wrap
  • Silver Wraith white wrap
  • Silver Wraith gray wrap
  • Silver Wraith silver wrap
  • Silver Wraith red wrap
  • Silver Wraith blue wrap
  • Silver Wraith green wrap
  • Silver Wraith yellow wrap
  • Silver Wraith orange wrap
  • Silver Wraith purple wrap
  • Silver Wraith pink wrap
  • Silver Wraith teal wrap
  • Silver Wraith brown wrap
  • Silver Wraith gold wrap
  • Silver Wraith chrome wrap
  • Silver Wraith color shift wrap
  • Silver Wraith carbon fiber wrap
  • Silver Wraith camo and patterned wrap

How much vinyl to wrap a Rolls-Royce Silver Wraith

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1980sedan (4 doors)211.5 in (5,372 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1946–1959convertible, sedan (2 or 4 doors)206.0 in (5,232 mm)about 62 ft (19 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Silver Wraith wrap cost factors

Silver Wraith wrap cost depends on the body style, the panels and the film you pick. The first generation convertible adds work around the roof opening and the rear deck, while the sedan has a simpler roof. The second generation is a large four-door sedan, so the roof and the hood take long, uninterrupted sheets. Paint condition and the amount of bright trim to cut around also change the labor.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).

Silver Wraith wraps by generation

Swipe sideways. Tap a card for the full description.

Rolls-Royce Silver Wraith, second generation, factory photo
Factory color shown

1975–1980 Silver Wraith sedan (second generation)

1975–1980sedan (4 doors)211.5 in (5,372 mm)

Paint age on a second generation Silver Wraith from 1975–1980 is a real factor before you wrap. The panels may be original or repainted, and a wrap film does not hide deep scratches or rust. A test spot on the hood or a door shows whether the adhesive will hold without lifting old paint. A clean, smooth surface gives the vinyl wrap the best chance to lay flat.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Rolls-Royce Silver Wraith, first generation, factory photo
Factory color shown

1946–1959 Silver Wraith convertible, sedan (first generation)

1946–1959convertible, sedan (2 or 4 doors)206.0 in (5,232 mm)

The open top of a first generation Silver Wraith is handled differently in a wrap. The fabric top is not wrapped at all: the film ends where the top begins, along its chrome or painted edge. A folding hard top is treated as its own set of panels, wrapped with separate pieces. The film lines around the rear deck and the door tops need the same care as on any other panel.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 62 ft (19 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Silver Wraith

A partial wrap on a Silver Wraith is possible for the roof, hood or mirror caps. Silver Wraith chrome delete covers the window trim and badges with black film for a more modern look. Paint protection film (PPF) on the front end adds a clear layer against stone chips. These smaller jobs still use the same cast film as a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Rolls-Royce Silver Wraith: body, cut-outs and film

The Rolls-Royce Silver Wraith vinyl wrap follows the size and shape of a full-size luxury body. The second generation is a four-door sedan that measures 211.5 in (5,372 mm) long. The first generation offers convertible and sedan styles with two or four doors, and its length is 206.0 in (5,232 mm). These large panels use film efficiently but call for careful work on long, flat sides.

Silver Wraith wrap ideas on these cars should always respect the bright trim and door hardware. The film must be cut out around window surrounds, door handles, badges and moldings, and those parts are best removed where possible. The wrap film goes up to the edges of the fabric top on the first generation convertible. On a folding hard top the panels are wrapped as separate pieces.

How much vinyl to wrap a Silver Wraith depends on which generation you have. The second generation needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full color change. The first generation runs from about 62 ft (19 m) for the convertible to 64 ft (19.5 m) for the sedan, with the same film width. Chrome or patterned film on either body pushes the total up to about 74 ft (22.5 m).

Questions about wrapping a Rolls-Royce Silver Wraith

How much vinyl does it take to wrap a Rolls-Royce Silver Wraith?

A Rolls-Royce Silver Wraith takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full wrap on the second generation body. The first generation is slightly smaller, from about 62 ft (19 m) for the convertible to 64 ft (19.5 m) for the sedan. This is the figure for a standard color change wrap without chrome or patterned film.

Can I wrap only the hood or the roof of a Silver Wraith?

Yes, you can wrap only the hood or the roof of a Silver Wraith. A partial wrap may cover the roof, the hood or the mirror caps, and still use the same cast film as a full wrap. The edges are finished at body lines so the film looks clean on its own. This is a good way to protect a high-wear area or change one panel.

Is a Silver Wraith hard to wrap?

A Silver Wraith is not hard to wrap, but its size and trim add work. The body is about 211.5 in (5,372 mm) long, so the roof and the rear quarters need large pieces of film. The first generation convertible has a fabric top that must be masked off, and the film ends at the roof opening. The bright window trim and badges on both generations take extra time to cut around or remove.

How many generations of the Silver Wraith does this page cover?

This page covers two generations of the Rolls-Royce Silver Wraith. The first generation ran from 1946 to 1959, and the second from 1975 to 1980. The first generation offered convertible and sedan styles, while the second was a four-door sedan.