Wraps by car

Rolls-Royce Phantom wrap

The Rolls-Royce Phantom wrap page covers all eight generations of this luxury car, from 1950 to the present. A vinyl wrap of the newest eighth-generation Phantom uses about 72 ft (22 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on the same body takes about 82 ft (25 m).

8generations22 mof film for a full wrap

Rolls-Royce Phantom, eighth generation, factory photo
Rolls-Royce Phantom, eighth generation. Factory color shown.

Rolls-Royce Phantom wrap colors and ideas

  • Phantom black wrap
  • Phantom white wrap
  • Phantom gray wrap
  • Phantom silver wrap
  • Phantom red wrap
  • Phantom blue wrap
  • Phantom green wrap
  • Phantom yellow wrap
  • Phantom orange wrap
  • Phantom purple wrap
  • Phantom pink wrap
  • Phantom teal wrap
  • Phantom brown wrap
  • Phantom gold wrap
  • Phantom chrome wrap
  • Phantom color shift wrap
  • Phantom carbon fiber wrap
  • Phantom camo and patterned wrap

How much vinyl to wrap a Rolls-Royce Phantom

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowsedan (4 doors)226.9 in (5,762 mm) to 234.7 in (5,962 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
2003–2016convertible, coupe, sedan (2 or 4 doors)220.8 in (5,609 mm) to 239.8 in (6,092 mm)about 66 ft (20 m) for the convertible to 76 ft (23 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m)
1968–1990sedan (4 doors)238.0 in (6,045 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
1959–1968sedan (4 doors)238.0 in (6,045 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
1950–1956sedan (4 doors)227.0 in (5,765 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
1936–1939sedan (4 doors)200.8 in (5,100 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1929–1936sedan (4 doors)200.0 in (5,080 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1925–1931sedan (4 doors)196.9 in (5,000 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Phantom wrap cost factors

Phantom wrap cost depends on the amount of film and the time needed for the large panels and cut-outs. The newest body uses about 72 ft (22 m) of cast film, or about 82 ft (25 m) for chrome or patterned film. A taller body like the sixth generation, at 69.0 in (1,753 mm), requires a platform for the roof and more labor. Additional time is needed for cutting around sensors, cameras, and other features.

  • Film for a full wrap: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: sedan (4 doors).
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Restyled in 2022: bumpers and lights differ between the versions, and so do the film cuts.

Phantom wraps by generation

Swipe sideways. Tap a card for the full description.

Rolls-Royce Phantom, eighth generation, factory photo
Factory color shown

2017–now Phantom sedan (eighth generation)

2017–nowsedan (4 doors)226.9 in (5,762 mm) to 234.7 in (5,962 mm)

The eighth-generation Phantom, produced from 2017 to now, was restyled in 2022. The bumpers and lights changed, so film cut for one version does not fit the other. Wrap installers must check the production year before cutting the film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Rolls-Royce Phantom, seventh generation, factory photo
Factory color shown

2003–2016 Phantom convertible, coupe, sedan (seventh generation)

2003–2016convertible, coupe, sedan (2 or 4 doors)220.8 in (5,609 mm) to 239.8 in (6,092 mm)

The seventh-generation Phantom, made from 2003 to 2016, includes convertible bodies. A fabric top is not wrapped and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) for the convertible to 76 ft (23 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m).

Rolls-Royce Phantom, sixth generation, factory photo
Factory color shown

1968–1990 Phantom sedan (sixth generation)

1968–1990sedan (4 doors)238.0 in (6,045 mm)

The sixth-generation Phantom, built from 1968 to 1990, has a tall body of 69.0 in (1,753 mm). The roof is wrapped from a platform, which adds time to the installation. The sedan body is 238.0 in (6,045 mm) long.

A tall body (69.0 in (1,753 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Rolls-Royce Phantom, fifth generation, factory photo
Factory color shown

1959–1968 Phantom sedan (fifth generation)

1959–1968sedan (4 doors)238.0 in (6,045 mm)

The fifth-generation Phantom, produced from 1959 to 1968, may have original or repainted panels. A test spot on the paint comes before a full wrap to check adhesion. The body is 238.0 in (6,045 mm) long and 69.0 in (1,753 mm) tall.

A tall body (69.0 in (1,753 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Rolls-Royce Phantom, fourth generation, factory photo
Factory color shown

1950–1956 Phantom sedan (fourth generation)

1950–1956sedan (4 doors)227.0 in (5,765 mm)

The fourth-generation Phantom, made from 1950 to 1956, is a four-door sedan of 227.0 in (5,765 mm) in length. It takes about 70 ft (21.5 m) of cast film for a full wrap. The tall body of 74.0 in (1,879 mm) means the roof is wrapped from a platform.

A tall body (74.0 in (1,879 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Rolls-Royce Phantom, third generation, factory photo
Factory color shown

1936–1939 Phantom sedan (third generation)

1936–1939sedan (4 doors)200.8 in (5,100 mm)

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Rolls-Royce Phantom, second generation, factory photo
Factory color shown

1929–1936 Phantom sedan (second generation)

1929–1936sedan (4 doors)200.0 in (5,080 mm)

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Rolls-Royce Phantom, first generation, factory photo
Factory color shown

1925–1931 Phantom sedan (first generation)

1925–1931sedan (4 doors)196.9 in (5,000 mm)

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Phantom

A partial wrap on a Phantom can cover the roof, hood, and mirror caps. Phantom chrome delete involves covering window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Rolls-Royce Phantom: body, cut-outs and film

A Rolls-Royce Phantom vinyl wrap must suit the large body styles offered across the years. The newest Phantom is a four-door sedan with a length from 226.9 in (5,762 mm) to 234.7 in (5,962 mm). The seventh generation added convertible and coupe bodies, which changes how the film is laid out. Longer panels on these cars mean careful planning for the film seams.

Phantom wrap ideas should account for the sensors and cameras on every trim of the current model. The film is cut around each parking sensor in the bumpers and around each camera lens in the body. On some seventh-generation trims, a sunroof requires cutting the roof film around its opening. Fog lamps on some trims also need cut-outs in the bumper film.

When you ask how much vinyl to wrap a Phantom, the answer depends on the generation and body style. The seventh-generation sedan needs about 76 ft (23 m), while the convertible needs about 66 ft (20 m). A sixth-generation or fifth-generation sedan takes about 74 ft (22.5 m) of cast film. The restyling within a generation can change the film patterns for bumpers and lights.

Questions about wrapping a Rolls-Royce Phantom

How much vinyl does it take to wrap a Rolls-Royce Phantom?

It takes about 72 ft (22 m) of 60-inch (1.52 m) cast film to wrap a Rolls-Royce Phantom of the newest generation. For chrome or patterned film, about 82 ft (25 m) is needed. The exact amount depends on the specific body length and options.

Which years of the Phantom take the same film cuts?

The eighth-generation Phantom from 2017 to 2021 takes one set of film cuts. The restyled 2022 and later models take different cuts for the bumpers and lights. The seventh-generation models from 2003 to 2011 take one set, and the 2012 restyle takes another.

Can I wrap only the hood or the roof of a Phantom?

Yes, you can wrap only the hood or the roof of a Phantom. A partial wrap often covers the roof, hood, and mirror caps. This uses less film and can be a good way to change the look of the car.

Is a Phantom hard to wrap?

A Phantom adds extra work because of its large size and features. The current model has parking sensors and cameras that require precise cut-outs in the film. Older tall bodies need a platform for the roof, and some trims have sunroofs or fog lamps to work around.