Wraps by car

Rolls-Royce Park Ward wrap

A Rolls-Royce Park Ward wrap covers one generation of this luxury sedan, produced from 2000 to 2002. The car is 222.0 in (5,640 mm) long and is a four-door sedan. A full vinyl wrap on the Park Ward takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film.

1generations20.5 mof film for a full wrap

Rolls-Royce Park Ward, first generation, factory photo
Rolls-Royce Park Ward, first generation. Factory color shown.

Rolls-Royce Park Ward wrap colors and ideas

  • Park Ward black wrap
  • Park Ward white wrap
  • Park Ward gray wrap
  • Park Ward silver wrap
  • Park Ward red wrap
  • Park Ward blue wrap
  • Park Ward green wrap
  • Park Ward yellow wrap
  • Park Ward orange wrap
  • Park Ward purple wrap
  • Park Ward pink wrap
  • Park Ward teal wrap
  • Park Ward brown wrap
  • Park Ward gold wrap
  • Park Ward chrome wrap
  • Park Ward color shift wrap
  • Park Ward carbon fiber wrap
  • Park Ward camo and patterned wrap

How much vinyl to wrap a Rolls-Royce Park Ward

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2002sedan (4 doors)222.0 in (5,640 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Park Ward wrap cost factors

Park Ward wrap cost depends on the size of the car and the condition of the paint. The 222.0 in (5,640 mm) length and four doors mean more film and more labor than a smaller sedan. Chrome or patterned film needs about 79 ft (24 m), which adds material. Paint condition matters on a car from 2000 to 2002, since any repair work adds hours.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: sedan (4 doors).

Park Ward wraps by generation

Swipe sideways. Tap a card for the full description.

Rolls-Royce Park Ward, first generation, factory photo
Factory color shown

2000–2002 Park Ward sedan (first generation)

2000–2002sedan (4 doors)222.0 in (5,640 mm)

The first generation Park Ward was made from 2000 to 2002 as a four-door sedan. It is 222.0 in (5,640 mm) long and takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a full wrap. Panels on a car of these years may be original or repainted, so a test spot comes before a full wrap.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Park Ward

A partial wrap on a Park Ward can cover the roof, hood, or mirror caps separately. Chrome delete, which is bright trim covered with black film, works on the window trim and badges. Paint protection film (PPF) as a clear film on the front end is another option for this car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Rolls-Royce Park Ward: body, cut-outs and film

A Rolls-Royce Park Ward vinyl wrap depends on the single body style of this car: a four-door sedan. The 222.0 in (5,640 mm) length means large, uninterrupted panels, so film layout is straightforward. The doors are long and the roof area is substantial, which adds to the amount of film used.

Park Ward wrap ideas start with the details that need extra work. The door handles, window trim, and badges need cut-outs or removal. The front and rear bumpers have sensors and cut lines that the film must be trimmed around. The hood ornament comes off before the wrap and goes back on after.

To know how much vinyl to wrap a Park Ward, look at the one generation made from 2000 to 2002. The body did not change in those years, so the film estimate is the same for every Park Ward. The length of 222.0 in (5,640 mm) is the main figure behind the 67 ft (20.5 m) of film.

Questions about wrapping a Rolls-Royce Park Ward

How much vinyl does it take to wrap a Rolls-Royce Park Ward?

A Rolls-Royce Park Ward takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. If you choose chrome or patterned film, calculate about 79 ft (24 m). These figures are for the first generation body made from 2000 to 2002.

Can I wrap only the hood or the roof of a Park Ward?

Yes, you can wrap only the hood or only the roof of a Park Ward. A partial wrap on this car also works on the mirror caps. The window trim and badges can be done as a chrome delete, and clear paint protection film can be applied to the front end.

Is a Park Ward hard to wrap?

A Park Ward is not the easiest car to wrap because of its size and details. The 222.0 in (5,640 mm) length means long sections of film and a large roof area. The door handles, window trim, badges, and bumpers have cut-outs that add work, and the hood ornament must come off.

How many generations of the Park Ward does this page cover?

This page covers one generation of the Rolls-Royce Park Ward, produced from 2000 to 2002. It was a four-door luxury sedan with a length of 222.0 in (5,640 mm). That single body is the basis for all wrap estimates on this page.