Wraps by car

Rolls-Royce Dawn wrap

The Rolls-Royce Dawn wrap page covers the first generation convertible produced from 2015 to 2022. This car has one generation in the catalog, and a full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

1generations17 mof film for a full wrap

Rolls-Royce Dawn, first generation, factory photo
Rolls-Royce Dawn, first generation. Factory color shown.

Rolls-Royce Dawn wrap colors and ideas

  • Dawn black wrap
  • Dawn white wrap
  • Dawn gray wrap
  • Dawn silver wrap
  • Dawn red wrap
  • Dawn blue wrap
  • Dawn green wrap
  • Dawn yellow wrap
  • Dawn orange wrap
  • Dawn purple wrap
  • Dawn pink wrap
  • Dawn teal wrap
  • Dawn brown wrap
  • Dawn gold wrap
  • Dawn chrome wrap
  • Dawn color shift wrap
  • Dawn carbon fiber wrap
  • Dawn camo and patterned wrap

How much vinyl to wrap a Rolls-Royce Dawn

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2022convertible (2 doors)208.1 in (5,285 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Dawn wrap cost factors

The Dawn wrap cost depends on the amount of film and the labor for this large convertible. A full wrap uses about 56 ft (17 m) of film, and the body has many cut-outs for sensors, cameras, and fog lamps. The two-tone factory paint also adds decisions for the installer, whether to keep the split or cover it. The final cost also depends on the film type chosen, such as cast vinyl or chrome film.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Dawn wraps by generation

Swipe sideways. Tap a card for the full description.

Rolls-Royce Dawn, first generation, factory photo
Factory color shown

2015–2022 Dawn convertible (first generation)

2015–2022convertible (2 doors)208.1 in (5,285 mm)

The first generation Rolls-Royce Dawn has a fabric convertible top that is not wrapped. The film ends where the fabric top begins, and the roof is left in its original color. Every trim has a two-tone body from the factory, so the wrap either keeps that split or covers it with one color. The convertible top does not add film area but may require careful masking at the edges.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Dawn

The partial wrap options for a Rolls-Royce Dawn include the hood, mirror caps, and rear deck. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is offered as clear film on the front end. These smaller jobs use less film than a full wrap and can be completed without touching the fabric top.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Rolls-Royce Dawn: body, cut-outs and film

The Rolls-Royce Dawn vinyl wrap is affected by the car's single body style. The convertible has two doors and measures 208.1 in (5,285 mm) long, which is a large but manageable surface for a skilled installer. The fabric top is not wrapped, so the film ends where the top begins. The absence of a roof reduces the total film needed compared with a closed car of the same size.

Dawn wrap ideas must account for several cut-outs and removable parts. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Cameras in the body also require precise cut-outs around each lens, and fog lamps in the front bumper need cut-outs in the bumper film. These details are part of a clean, professional installation.

To calculate how much vinyl to wrap a Dawn, note that there is only one generation in the catalog. The single body style and consistent dimensions mean the film estimate does not change between years. A full wrap of this car uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 70 ft (21.5 m).

Questions about wrapping a Rolls-Royce Dawn

How much vinyl does it take to wrap a Rolls-Royce Dawn?

A full wrap of a Rolls-Royce Dawn takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. The estimate is based on the first generation convertible body. For chrome or patterned film, the amount increases to about 70 ft (21.5 m).

Is the top of a Dawn wrapped?

No, the fabric top of a Dawn is not wrapped. The film ends where the fabric top begins, leaving the roof in its original color. Only the painted body panels are covered.

Can I wrap only the hood or the roof of a Dawn?

Yes, you can wrap only the hood or the roof of a Dawn. Partial wrap options include the hood, mirror caps, and rear deck. Since the roof is fabric, wrapping the roof refers to the painted panels around it, not the top itself.

Is a Dawn hard to wrap?

Yes, a Dawn is considered hard to wrap due to its size and details. The car is 208.1 in (5,285 mm) long and has many cut-outs for parking sensors, cameras, and fog lamps. Every trim has a two-tone factory paint, which requires careful planning for the wrap. The fabric top also means the film must be precisely cut at the edges.