Wraps by car

Rolls-Royce Spectre wrap

A Rolls-Royce Spectre wrap transforms the look of this luxury electric coupe with a full vinyl wrap. The Spectre is the only body style in its first generation, introduced in 2022 and still in production. A full wrap of the newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 76 ft (23 m).

1generations20.5 mof film for a full wrap

Rolls-Royce Spectre, first generation, factory photo
Rolls-Royce Spectre, first generation. Factory color shown.

Rolls-Royce Spectre wrap colors and ideas

  • Spectre black wrap
  • Spectre white wrap
  • Spectre gray wrap
  • Spectre silver wrap
  • Spectre red wrap
  • Spectre blue wrap
  • Spectre green wrap
  • Spectre yellow wrap
  • Spectre orange wrap
  • Spectre purple wrap
  • Spectre pink wrap
  • Spectre teal wrap
  • Spectre brown wrap
  • Spectre gold wrap
  • Spectre chrome wrap
  • Spectre color shift wrap
  • Spectre carbon fiber wrap
  • Spectre camo and patterned wrap

How much vinyl to wrap a Rolls-Royce Spectre

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowcoupe (2 doors)214.7 in (5,453 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Spectre wrap cost factors

Spectre wrap cost depends on the film type, the number of panels, and the labor of a 214.7 in (5,453 mm) coupe. Chrome or patterned film takes about 76 ft (23 m), which is more material than standard cast film at 67 ft (20.5 m). The large side doors and the separate charge port piece add to installation time without changing the overall area.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Spectre wraps by generation

Swipe sideways. Tap a card for the full description.

Rolls-Royce Spectre, first generation, factory photo
Factory color shown

2022–now Spectre coupe (first generation)

2022–nowcoupe (2 doors)214.7 in (5,453 mm)

The first-generation Spectre is a 214.7 in (5,453 mm) two-door coupe introduced in 2022. Its size means a full wrap takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film, or 76 ft (23 m) of chrome or patterned film. The body has only two doors, and each long side door is one large piece of film. This layout reduces the number of panels compared to a four-door sedan.

Two long side doors: each door is one large piece of film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Spectre

A partial wrap on a Spectre can cover the roof, hood, or mirror caps to change a specific area. A chrome delete covers window trim and badges with black film for a darker look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap but still need precise cutting.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Rolls-Royce Spectre: body, cut-outs and film

A Rolls-Royce Spectre vinyl wrap covers a 214.7 in (5,453 mm) two-door coupe body. The long side doors are each one large piece of film, and the roofline flows to the rear without sharp breaks. This reduces the number of seams but demands careful film handling on large panels. The total area means a full wrap uses about 67 ft (20.5 m) of standard film.

Spectre wrap ideas often start with the charge port door, which is wrapped as a small piece of its own. Each long side door is a single large panel that suits a seamless color change wrap. The door handles and badges come off for clean edges, and the window trim can be covered for a chrome delete. The front bumper and grille area need cut-outs for sensors and the Spirit of Ecstasy.

There is only one generation of the Spectre so far, so how much vinyl to wrap a Spectre does not change between generations. The first generation, produced from 2022 onward, is the only body style in the catalog. Anyone counting film for this coupe uses the same figures for every production year. A full wrap needs about 67 ft (20.5 m) of 60-inch cast film.

Questions about wrapping a Rolls-Royce Spectre

How much vinyl does it take to wrap a Rolls-Royce Spectre?

A full wrap of a Rolls-Royce Spectre takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the amount is about 76 ft (23 m). These figures cover the complete exterior of the first-generation coupe.

Can I wrap only the hood or the roof of a Spectre?

Yes, you can wrap only the hood or the roof of a Spectre as a partial wrap. Other partial areas include mirror caps and the front end with paint protection film. A chrome delete on the window trim and badges is another way to change a small section.

Is a Spectre hard to wrap?

The Spectre is not hard to wrap for a shop with experience on large coupes, but it adds work in a few places. The two long side doors are each one large piece of film, so they require careful handling. The charge port door is wrapped as a small separate piece, which adds a step. The body length of 214.7 in (5,453 mm) means more material and more time than a smaller car.

How many generations of the Spectre does this page cover?

This page covers one generation of the Spectre. The first generation has been in production since 2022 and is the only generation in the catalog.