Wraps by car

SEAT Alhambra wrap

A SEAT Alhambra wrap covers the full body of this seven-seat minivan with a vinyl wrap. The catalog lists two generations: the first built from 1996 to 2010 and the second from 2010 to 2020. A full wrap of the newest body takes about 72 ft (22 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 84 ft (25.5 m).

2generations22 mof film for a full wrap

SEAT Alhambra, second generation, factory photo
SEAT Alhambra, second generation. Factory color shown.

SEAT Alhambra wrap colors and ideas

  • Alhambra black wrap
  • Alhambra white wrap
  • Alhambra gray wrap
  • Alhambra silver wrap
  • Alhambra red wrap
  • Alhambra blue wrap
  • Alhambra green wrap
  • Alhambra yellow wrap
  • Alhambra orange wrap
  • Alhambra purple wrap
  • Alhambra pink wrap
  • Alhambra teal wrap
  • Alhambra brown wrap
  • Alhambra gold wrap
  • Alhambra chrome wrap
  • Alhambra color shift wrap
  • Alhambra carbon fiber wrap
  • Alhambra camo and patterned wrap

How much vinyl to wrap an SEAT Alhambra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2020van (5 doors)191.1 in (4,854 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)
1996–2010van (5 doors)181.8 in (4,617 mm) to 182.4 in (4,634 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Alhambra wrap cost factors

Alhambra wrap cost depends on the size of the body, the film chosen, and the labor for the details. The second generation panel area is larger than the first, so it uses more material. Cut-outs around parking sensors, fog lamps, a sunroof, or roof rails add time. Sliding door tracks also require careful trimming.

  • Film for a full wrap: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2015: bumpers and lights differ between the versions, and so do the film cuts.

Alhambra wraps by generation

Swipe sideways. Tap a card for the full description.

SEAT Alhambra, second generation, factory photo
Factory color shown

2010–2020 Alhambra van (second generation)

2010–2020van (5 doors)191.1 in (4,854 mm)

The second generation SEAT Alhambra from 2010 to 2020 has sliding side doors whose tracks stay bare and decide where the film is cut. The film is trimmed along the edge of each track, leaving the track exposed. This keeps the door mechanism clean and the wrap edges tidy.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

SEAT Alhambra, first generation, factory photo
Factory color shown

1996–2010 Alhambra van (first generation)

1996–2010van (5 doors)181.8 in (4,617 mm) to 182.4 in (4,634 mm)

On a first generation SEAT Alhambra from 1996 to 2010, paint age decides how the wrap is prepared. Panels may be original or repainted after years of use. A test spot is applied and removed before a full wrap to check that the paint can hold the film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (69.4 in (1,762 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on an Alhambra

An Alhambra chrome delete covers the bright window trim and badges with black film. A partial wrap can be limited to the roof, hood, or mirror caps. Paint protection film (PPF) is often applied as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an SEAT Alhambra: body, cut-outs and film

A SEAT Alhambra vinyl wrap has to follow the shape of a five-door van that stayed close in size across two generations. The second generation body is 191.1 in (4,854 mm) long, while the first generation ran from 181.8 in (4,617 mm) to 182.4 in (4,634 mm). The tall roof and large flat side panels make the Alhambra one of the bigger wrap jobs in its class. The sliding side doors add a clear line where the film must stop.

Alhambra wrap ideas start with the sliding side doors: the door tracks stay bare, and the film is cut along them. Some trims have a sunroof, so the roof film is cut around its opening. Roof rails on some trims come off before the roof is wrapped, or the film is cut along them. Parking sensors in the bumpers and fog lamps in the front bumper also get cut-outs in the film.

How much vinyl to wrap an Alhambra depends on the generation you have. A first generation body from 1996 to 2010 uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. The second generation from 2010 to 2020 needs about 72 ft (22 m). Chrome or patterned film adds about 12 ft (3.5 m) in both generations.

Questions about wrapping an SEAT Alhambra

How much vinyl does it take to wrap an SEAT Alhambra?

A full wrap of the newest SEAT Alhambra takes about 72 ft (22 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 84 ft (25.5 m).

Are the sliding doors of an Alhambra wrapped?

Yes, the sliding doors of an Alhambra are wrapped. The film is cut along the door tracks, which stay bare.

Can the roof of an Alhambra be wrapped?

Yes, the roof of an Alhambra can be wrapped. If the car has a sunroof, the film is cut around its opening. Roof rails are removed first or the film is cut along them.

Which years of the Alhambra take the same film cuts?

The second generation Alhambra, built from 2010 to 2020 with a restyle in 2015, takes the same film cuts. The first generation, built from 1996 to 2010 with a restyle in 2000, also shares cuts within its years.