Wraps by car

SEAT Altea wrap

The SEAT Altea wrap page covers the first generation of this minivan, produced from 2004 to 2015. A full wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 74 ft (22.5 m). This vinyl wrap guide explains the body, film cuts and smaller jobs.

1generations19.5 mof film for a full wrap

SEAT Altea, first generation, factory photo
SEAT Altea, first generation. Factory color shown.

SEAT Altea wrap colors and ideas

  • Altea black wrap
  • Altea white wrap
  • Altea gray wrap
  • Altea silver wrap
  • Altea red wrap
  • Altea blue wrap
  • Altea green wrap
  • Altea yellow wrap
  • Altea orange wrap
  • Altea purple wrap
  • Altea pink wrap
  • Altea teal wrap
  • Altea brown wrap
  • Altea gold wrap
  • Altea chrome wrap
  • Altea color shift wrap
  • Altea carbon fiber wrap
  • Altea camo and patterned wrap

How much vinyl to wrap an SEAT Altea

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2015van (5 doors)168.6 in (4,282 mm) to 176.9 in (4,493 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Altea wrap cost factors

The Altea wrap cost depends on the size of the body, the film type, and the amount of disassembly. The body length ranges from 168.6 in (4,282 mm) to 176.9 in (4,493 mm), which changes the film area. A full wrap needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, or about 74 ft (22.5 m) with chrome or patterned film. The sliding door tracks and fog lamp cut-outs add labor time.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2009: bumpers and lights differ between the versions, and so do the film cuts.

Altea wraps by generation

Swipe sideways. Tap a card for the full description.

SEAT Altea, first generation, factory photo
Factory color shown

2004–2015 Altea van (first generation)

2004–2015van (5 doors)168.6 in (4,282 mm) to 176.9 in (4,493 mm)

The first generation SEAT Altea has sliding side doors, and the tracks stay bare and decide where the film is cut. The film is trimmed along the upper and lower edges of each track. No film is applied inside the tracks because it would peel from the movement of the door. The installer cuts a clean line right at the track edge.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Altea

An Altea chrome delete covers the window trim and badges with black film. A partial wrap on this car can include the roof, hood, and mirror caps. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full wrap and focus on specific panels.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an SEAT Altea: body, cut-outs and film

A SEAT Altea vinyl wrap needs to follow the van body style with its five doors and sliding side doors. The body length ranges from 168.6 in (4,282 mm) to 176.9 in (4,493 mm), so film panels must be cut to these sizes. The tall sides and flat roof of the minivan body use wide sheets that reduce the number of seams. A wrap installer measures each panel before cutting the film.

Altea wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. Every trim has fog lamps in the front bumper, so the bumper film needs cut-outs around those lamps. Door handles, mirrors and badges are removed before the film goes on for cleaner edges. The roof rails and antenna also need careful cutting if they are on the car.

How much vinyl to wrap an Altea depends on the body length, which changed over the production run. The first generation was restyled in 2009, and the body lengths range from 168.6 in (4,282 mm) to 176.9 in (4,493 mm). A longer body uses more film on the roof and the lower side panels. The film estimate of about 64 ft (19.5 m) covers the newest body.

Questions about wrapping an SEAT Altea

How much vinyl does it take to wrap an SEAT Altea?

A full wrap of an SEAT Altea takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, allow about 74 ft (22.5 m). The body is a five-door van with sliding side doors, so the panels are large. The exact amount depends on the body length of your Altea.

Are the sliding doors of an Altea wrapped?

Yes, the sliding doors of an Altea are wrapped, but the door tracks stay bare. The film is cut along the edges of the tracks and does not go inside them. This keeps the film from peeling when the doors slide. The rest of the door panel is covered like a normal door.

Which years of the Altea take the same film cuts?

All years from 2004 to 2015 of the first generation Altea take basically the same film cuts. The body was restyled in 2009, but the sliding door layout stayed the same. The main difference is the body length, which changed from 168.6 in (4,282 mm) to 176.9 in (4,493 mm). The wrap patterns are the same shape but sized for each length.

Can I wrap only the hood or the roof of an Altea?

Yes, you can wrap only the hood or the roof of an Altea. The partial wrap options also include the mirror caps. These jobs use less film than a full wrap and can be done in a similar time. A roof wrap on the Altea covers a large flat area.