Wraps by car

SEAT Cordoba wrap

This page covers the SEAT Cordoba wrap across its two generations. The first generation ran from 1993 to 2002, and the second from 2002 to 2009. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on that car needs about 61 ft (18.5 m).

2generations14.5 mof film for a full wrap

SEAT Cordoba, second generation, factory photo
SEAT Cordoba, second generation. Factory color shown.

SEAT Cordoba wrap colors and ideas

  • Cordoba black wrap
  • Cordoba white wrap
  • Cordoba gray wrap
  • Cordoba silver wrap
  • Cordoba red wrap
  • Cordoba blue wrap
  • Cordoba green wrap
  • Cordoba yellow wrap
  • Cordoba orange wrap
  • Cordoba purple wrap
  • Cordoba pink wrap
  • Cordoba teal wrap
  • Cordoba brown wrap
  • Cordoba gold wrap
  • Cordoba chrome wrap
  • Cordoba color shift wrap
  • Cordoba carbon fiber wrap
  • Cordoba camo and patterned wrap

How much vinyl to wrap an SEAT Cordoba

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2009sedan (4 doors)168.5 in (4,280 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1993–2002coupe, sedan, wagon (2 or 4 or 5 doors)161.8 in (4,109 mm) to 163.9 in (4,163 mm)about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Cordoba wrap cost factors

Cordoba wrap cost depends on the generation, body style, and film type you choose. The first generation has more body styles and a wider film range, from 44 ft (13.5 m) to 51 ft (15.5 m). The second generation is a single sedan with a simpler bumper and fog lamp cut-outs. Chrome or patterned films use more material, up to 61–64 ft (18.5–19.5 m), so they can raise the total.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2006: bumpers and lights differ between the versions, and so do the film cuts.

Cordoba wraps by generation

Swipe sideways. Tap a card for the full description.

SEAT Cordoba, second generation, factory photo
Factory color shown

2002–2009 Cordoba sedan (second generation)

2002–2009sedan (4 doors)168.5 in (4,280 mm)

The second generation SEAT Cordoba was restyled in 2006, with bumpers and lights changed. Film cut for one version does not fit the other, so the production year matters for a wrap. A wrap installer must use the correct template for the car's front and rear ends.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

SEAT Cordoba, first generation, factory photo
Factory color shown

1993–2002 Cordoba coupe, sedan, wagon (first generation)

1993–2002coupe, sedan, wagon (2 or 4 or 5 doors)161.8 in (4,109 mm) to 163.9 in (4,163 mm)

The first generation SEAT Cordoba spans 1993 to 2002, so paint age is an important factor. Panels on these cars may be original or repainted, and a test spot comes before a full wrap. Checking paint condition helps the film adhere properly and prevents damage on removal.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Cordoba

Partial wrap jobs on a SEAT Cordoba include the roof, hood, and mirror caps. A Cordoba chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end for stone chip protection.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an SEAT Cordoba: body, cut-outs and film

A SEAT Cordoba vinyl wrap is shaped by the body styles and the car's compact dimensions. The second generation is a sedan with four doors, 168.5 in (4,280 mm) long. The first generation offered coupe, sedan, and wagon bodies from 161.8 in (4,109 mm) to 163.9 in (4,163 mm). These sizes keep the wrap area moderate for a compact car.

Cordoba wrap ideas should account for the parts that need cut-outs or removal. On the second generation, every trim has fog lamps in the front bumper, so the bumper film needs cut-outs. First generation cars have a tailgate with the rear glass in it, where the film ends at the edge of the glass.

How much vinyl to wrap a Cordoba changes between the two generations. The newest body uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap. The first generation ranges from about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the wagon in the same film width. Chrome or patterned film can require up to about 64 ft (19.5 m) on that body.

Questions about wrapping an SEAT Cordoba

How much vinyl does it take to wrap an SEAT Cordoba?

A full wrap of the newest SEAT Cordoba takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. This estimate applies to the second generation sedan from 2002 to 2009. Chrome or patterned film on the same car needs about 61 ft (18.5 m).

Which years of the Cordoba take the same film cuts?

The same film cuts apply within each generation before and after its restyling. The first generation was restyled in 1999, so 1993–1999 and 1999–2002 cars differ. The second generation was restyled in 2006, so 2002–2006 and 2006–2009 cars need different cuts.

Can I wrap only the hood or the roof of a Cordoba?

Yes, you can wrap only the hood or the roof of a Cordoba. Partial wrap options include the roof, hood, and mirror caps. This is a smaller job than a full wrap and uses less film.

Is a Cordoba hard to wrap?

A Cordoba is not especially hard to wrap, but some details add work. The second generation has fog lamps in the front bumper on every trim, so the installer must cut the film around them. The first generation's tailgate includes the rear glass, so the film has to end cleanly at the glass edge.