Wraps by car

SEAT Ateca wrap

SEAT Ateca wrap covers this SUV from 2016 to now, and this is the only generation in the catalog. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. The length of the car is 171.8 in (4,363 mm) to 172.5 in (4,381 mm), which sets the amount of film for the sides.

1generations18 mof film for a full wrap

SEAT Ateca, first generation, factory photo
SEAT Ateca, first generation. Factory color shown.

SEAT Ateca wrap colors and ideas

  • Ateca black wrap
  • Ateca white wrap
  • Ateca gray wrap
  • Ateca silver wrap
  • Ateca red wrap
  • Ateca blue wrap
  • Ateca green wrap
  • Ateca yellow wrap
  • Ateca orange wrap
  • Ateca purple wrap
  • Ateca pink wrap
  • Ateca teal wrap
  • Ateca brown wrap
  • Ateca gold wrap
  • Ateca chrome wrap
  • Ateca color shift wrap
  • Ateca carbon fiber wrap
  • Ateca camo and patterned wrap

How much vinyl to wrap an SEAT Ateca

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowSUV (5 doors)171.8 in (4,363 mm) to 172.5 in (4,381 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Ateca wrap cost factors

Ateca wrap cost depends on the size of the car and the amount of film used. The body is 171.8 in (4,363 mm) to 172.5 in (4,381 mm) long, and a full wrap uses about 59 ft (18 m) of cast film. Chrome or patterned film adds about 8 ft (2.5 m) more, and cut-outs for sensors and rails add labour time.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Ateca wraps by generation

Swipe sideways. Tap a card for the full description.

SEAT Ateca, first generation, factory photo
Factory color shown

2016–now Ateca SUV (first generation)

2016–nowSUV (5 doors)171.8 in (4,363 mm) to 172.5 in (4,381 mm)

The first generation SEAT Ateca from 2016 to now has one body style, a five-door SUV. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. The restyle in 2020 changed the bumpers, but the wrap film is cut the same way before and after.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Ateca

A partial wrap on an Ateca can be the hood, mirror caps, or the roof on cars without the glass panel. Ateca chrome delete covers the window trim and badges with black film, and paint protection film (PPF) is a clear film on the front end. These jobs use less film than a full wrap and leave the rest of the body as it is.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an SEAT Ateca: body, cut-outs and film

SEAT Ateca vinyl wrap works with one five-door SUV body style, so the film plan is the same for every car. The body is 171.8 in (4,363 mm) to 172.5 in (4,381 mm) long, a size that a single installer can handle in a day. Two extra feet of film are cut for the tailgate and the rear bumper, and the roof rails add a little waste when the roof is wrapped.

Ateca wrap ideas start with the tailgate that has the rear glass in it, so the film ends at the edge of the glass. Every trim has roof rails, and they come off before the roof is wrapped or the film is cut along them. Some trims have a panoramic glass roof, which is not wrapped, and the film ends at the roof rails. Every trim has parking sensors in the bumpers and fog lamps in the front bumper, so the film is cut around each sensor and each lamp.

How much vinyl to wrap an Ateca depends on the film width and the body panels. A 60-inch (1.52 m) roll needs about 59 ft (18 m) for a solid color, but chrome or patterned film takes about 67 ft (20.5 m) because the pattern must line up. The only change since 2016 is a restyle in 2020, and the panels are the same size, so the same amount of film works for all years.

Questions about wrapping an SEAT Ateca

How much vinyl does it take to wrap an SEAT Ateca?

A full wrap of an SEAT Ateca takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 67 ft (20.5 m) because the pattern has to be matched at the seams.

Can the roof of an Ateca be wrapped?

Yes, the roof of an Ateca can be wrapped, but the glass roof is not wrapped. The film ends at the roof rails, and on cars with a sunroof the film is cut around its opening.

Which years of the Ateca take the same film cuts?

The 2016 to now Ateca takes the same film cuts for the main body. The 2020 restyle changed the bumpers, so a wrap kit for the bumpers must match the year of the car.

Can I wrap only the hood or the roof of an Ateca?

Yes, you can wrap only the hood or the roof of an Ateca. A partial wrap can be the hood, mirror caps, or the roof on cars without the glass panel.