Wraps by car

SEAT Exeo wrap

A SEAT Exeo wrap uses a full roll of vinyl wrap on the mid-size sedan or wagon built from 2008 to 2011. The car has one generation in the catalog, and a full wrap of the newest body takes about 52 ft (16 m) for the sedan to 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film can take up to about 72 ft (22 m).

1generations16 mof film for a full wrap

SEAT Exeo, first generation, factory photo
SEAT Exeo, first generation. Factory color shown.

SEAT Exeo wrap colors and ideas

  • Exeo black wrap
  • Exeo white wrap
  • Exeo gray wrap
  • Exeo silver wrap
  • Exeo red wrap
  • Exeo blue wrap
  • Exeo green wrap
  • Exeo yellow wrap
  • Exeo orange wrap
  • Exeo purple wrap
  • Exeo pink wrap
  • Exeo teal wrap
  • Exeo brown wrap
  • Exeo gold wrap
  • Exeo chrome wrap
  • Exeo color shift wrap
  • Exeo carbon fiber wrap
  • Exeo camo and patterned wrap

How much vinyl to wrap an SEAT Exeo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2011sedan, wagon (4 or 5 doors)183.5 in (4,661 mm) to 183.9 in (4,670 mm)about 52 ft (16 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Exeo wrap cost factors

Exeo wrap cost depends on the amount of film, the body style, and the labor for the tailgate. The sedan takes about 52 ft (16 m) and the wagon about 56 ft (17 m) of 60-inch (1.52 m) film, so the wagon costs more in material. Chrome or patterned film can take up to about 72 ft (22 m), which raises the cost further. The tailgate with the rear glass needs extra time to trim the film around the window.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Exeo wraps by generation

Swipe sideways. Tap a card for the full description.

SEAT Exeo, first generation, factory photo
Factory color shown

2008–2011 Exeo sedan, wagon (first generation)

2008–2011sedan, wagon (4 or 5 doors)183.5 in (4,661 mm) to 183.9 in (4,670 mm)

The first generation SEAT Exeo from 2008 to 2011 was sold as a sedan and a wagon. The sedan takes about 52 ft (16 m) and the wagon about 56 ft (17 m) of 60-inch (1.52 m) cast film. The wagon has a larger roof and a tailgate with the rear glass, so the installer trims film around the window edge. Both body styles are mid-size and have similar door panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Exeo

Partial wrap options for the SEAT Exeo include the roof, hood, and mirror caps. Exeo chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done on the sedan or wagon.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an SEAT Exeo: body, cut-outs and film

The SEAT Exeo vinyl wrap covers a four-door sedan or a five-door wagon body. The sedan measures 183.5 in (4,661 mm) and the wagon 183.9 in (4,670 mm), so the panel plan is similar. The wagon adds roof area over the cargo section, which uses slightly more film. Both body styles have flat sides and a simple front end that suit wrap film well.

Exeo wrap ideas include leaving the tailgate glass uncovered because the rear glass is set into the tailgate. The film ends at the edge of the glass, so the tailgate needs a careful cut-out around the window. Door handles, mirrors, and badges are removed or cut around for a clean edge. The front bumper and grille are wrapped with inlays to avoid overstretching the film.

How much vinyl to wrap an Exeo depends on the body style and the film pattern. The sedan takes about 52 ft (16 m) and the wagon about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs up to about 72 ft (22 m) because it is less forgiving to stretch. The first generation from 2008 to 2011 is the only body in this catalog.

Questions about wrapping an SEAT Exeo

How much vinyl does it take to wrap an SEAT Exeo?

A full SEAT Exeo wrap takes about 52 ft (16 m) for the sedan and about 56 ft (17 m) for the wagon using 60-inch (1.52 m) cast film. Chrome or patterned film can take up to about 72 ft (22 m). The amount depends on the body style and how much film is needed for the tailgate cut-out.

Which Exeo body takes more film?

The wagon body of the SEAT Exeo takes more film than the sedan. The wagon needs about 56 ft (17 m) while the sedan needs about 52 ft (16 m) of 60-inch (1.52 m) cast film. The wagon has a longer roof and a tailgate, which adds surface area.

Can I wrap only the hood or the roof of an Exeo?

Yes, you can wrap only the hood or the roof of an Exeo. Hood and roof wraps are common partial wrap jobs on this car, along with mirror caps. A chrome delete is another partial option that covers the window trim and badges with black film. Paint protection film (PPF) is also available for the front end only.

Is an Exeo hard to wrap?

An Exeo is not particularly hard to wrap, but the tailgate with the rear glass adds some work. The film ends at the edge of the glass, so the installer must cut around the window carefully. The mid-size body is straightforward with flat panels, but the wagon roof is long. Overall, it is a manageable car for a professional installer.