Wraps by car

SEAT Leon Cupra wrap

The SEAT Leon Cupra wrap page covers all three generations of the car, from 1998 to 2021. A full vinyl wrap for the newest third-generation body takes about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the wagon. The film used is 60-inch (1.52 m) cast film.

3generations17 mof film for a full wrap

SEAT Leon Cupra, third generation, factory photo
SEAT Leon Cupra, third generation. Factory color shown.

SEAT Leon Cupra wrap colors and ideas

  • Leon Cupra black wrap
  • Leon Cupra white wrap
  • Leon Cupra gray wrap
  • Leon Cupra silver wrap
  • Leon Cupra red wrap
  • Leon Cupra blue wrap
  • Leon Cupra green wrap
  • Leon Cupra yellow wrap
  • Leon Cupra orange wrap
  • Leon Cupra purple wrap
  • Leon Cupra pink wrap
  • Leon Cupra teal wrap
  • Leon Cupra brown wrap
  • Leon Cupra gold wrap
  • Leon Cupra chrome wrap
  • Leon Cupra color shift wrap
  • Leon Cupra carbon fiber wrap
  • Leon Cupra camo and patterned wrap

How much vinyl to wrap an SEAT Leon Cupra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2021hatchback, wagon (3 or 5 doors)166.8 in (4,236 mm) to 179.1 in (4,548 mm)about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)
2006–2012hatchback (5 doors)169.6 in (4,309 mm) to 170.2 in (4,323 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1998–2005hatchback (5 doors)164.8 in (4,185 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Leon Cupra wrap cost factors

Leon Cupra wrap cost depends on the car size, the film type, and the amount of disassembly. A larger third-generation wagon uses more material than the hatchback, about 56 ft (17 m) versus 49 ft (15 m). Chrome or patterned film increases the material requirement to about 70 ft (21.5 m). Cut-outs around sensors and cameras add labor time.

  • Film for a full wrap: about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
  • Body: hatchback, wagon (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

Leon Cupra wraps by generation

Swipe sideways. Tap a card for the full description.

SEAT Leon Cupra, third generation, factory photo
Factory color shown

2014–2021 Leon Cupra hatchback, wagon (third generation)

2014–2021hatchback, wagon (3 or 5 doors)166.8 in (4,236 mm) to 179.1 in (4,548 mm)

On the third-generation Leon Cupra, the panoramic glass roof is not wrapped. The glass panel stays dark whatever the color of the film used on the body. The film ends at the roof rails on cars with this option.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a rear spoiler: it is wrapped as a piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

SEAT Leon Cupra, second generation, factory photo
Factory color shown

2006–2012 Leon Cupra hatchback (second generation)

2006–2012hatchback (5 doors)169.6 in (4,309 mm) to 170.2 in (4,323 mm)

The second-generation Leon Cupra was restyled in 2009 with changes to the bumpers and lights. Film cut for one version does not fit the other because the shapes differ. Owners should confirm the build year of the car before ordering pre-cut pieces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

SEAT Leon Cupra, first generation, factory photo
Factory color shown

1998–2005 Leon Cupra hatchback (first generation)

1998–2005hatchback (5 doors)164.8 in (4,185 mm)

On the first-generation Leon Cupra from 1998–2005, paint age matters before a wrap. Some panels may be original, while others could have been repainted. A test spot on the paint comes before a full wrap to check adhesion.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Leon Cupra

For a partial wrap on a Leon Cupra, you can cover the hood, mirror caps, roof on cars without the glass panel, or rear spoiler. A Leon Cupra chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to protect against stone chips.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an SEAT Leon Cupra: body, cut-outs and film

The SEAT Leon Cupra vinyl wrap needs film sized to a compact car with a tailgate and a length from 164.8 in (4,185 mm) to 179.1 in (4,548 mm). The tailgate includes the rear glass, so the film ends at the edge of the glass. The third generation offers a hatchback and a wagon, while earlier generations are five-door hatchbacks.

Leon Cupra wrap ideas start with the parts that need cut-outs or removal. The tailgate is wrapped up to the edge of the rear glass because the glass is part of the tailgate. Every trim has parking sensors in the bumpers on the third generation, and the film is cut around each sensor. Some trims add cameras, fog lamps, a sunroof, or a panoramic glass roof that is not wrapped.

How much vinyl to wrap a Leon Cupra depends on the generation and body style. The first generation from 1998–2005 needs about 49 ft (15 m) of cast film, while the second generation from 2006–2012 needs about 49 ft (15 m) as well. The third generation wagon holds the most film at about 56 ft (17 m). Chrome or patterned film can require up to about 70 ft (21.5 m) on the third generation.

Questions about wrapping an SEAT Leon Cupra

How much vinyl does it take to wrap an SEAT Leon Cupra?

It takes about 49 ft (15 m) for the hatchback and 56 ft (17 m) for the wagon of the newest third-generation Leon Cupra. The estimate uses 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 70 ft (21.5 m).

Can the roof of a Leon Cupra be wrapped?

Yes, the roof of a Leon Cupra can be wrapped, but glass panels are not wrapped. Some trims have a panoramic glass roof or a sunroof, and the film is cut around the opening. Cars with a steel roof can have the entire roof panel covered.

Which years of the Leon Cupra take the same film cuts?

Years with the same film cuts are the third generation 2014–2017 before its restyling, and 2017–2021 after it. The second generation 2006–2009 and 2009–2012 differ because of the 2009 restyling. The first generation 1998–2005 has one body shape with a sunroof cut-out.

Which Leon Cupra body takes more film?

The third-generation Leon Cupra wagon takes more film than the hatchback. The wagon needs about 56 ft (17 m) of 60-inch (1.52 m) cast film, while the hatchback needs about 49 ft (15 m). The first and second generation five-door hatchbacks also need about 49 ft (15 m).