Wraps by car

Alpina B10 wrap

The Alpina B10 wrap page covers all three generations of this full-size model, from the first sedan to the third-generation sedan and wagon. A full vinyl wrap of the newest body takes about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon. The page explains what each body style means for film amount and what parts need extra work.

3generations16 mof film for a full wrap

Alpina B10, third generation, factory photo
Alpina B10, third generation. Factory color shown.

Alpina B10 wrap colors and ideas

  • Alpina B10 black wrap
  • Alpina B10 white wrap
  • Alpina B10 gray wrap
  • Alpina B10 silver wrap
  • Alpina B10 red wrap
  • Alpina B10 blue wrap
  • Alpina B10 green wrap
  • Alpina B10 yellow wrap
  • Alpina B10 orange wrap
  • Alpina B10 purple wrap
  • Alpina B10 pink wrap
  • Alpina B10 teal wrap
  • Alpina B10 brown wrap
  • Alpina B10 gold wrap
  • Alpina B10 chrome wrap
  • Alpina B10 color shift wrap
  • Alpina B10 carbon fiber wrap
  • Alpina B10 camo and patterned wrap

How much vinyl to wrap an Alpina B10

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2004sedan, wagon (4 or 5 doors)188.0 in (4,775 mm) to 189.2 in (4,805 mm)about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1988–1996sedan, wagon (4 or 5 doors)185.8 in (4,720 mm)about 52 ft (16 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)
1984–1987sedan (4 doors)181.9 in (4,620 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Alpina B10 wrap cost factors

Alpina B10 wrap cost depends on the body style, the film type, and the amount of film. A wagon uses more film than a sedan, and chrome or patterned film needs up to about 74 ft (22.5 m) on the third generation. The number of cut-outs and panel removals also affects the labour.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Alpina B10 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpina B10, third generation, factory photo
Factory color shown

1997–2004 Alpina B10 sedan, wagon (third generation)

1997–2004sedan, wagon (4 or 5 doors)188.0 in (4,775 mm) to 189.2 in (4,805 mm)

The third generation Alpina B10 was built from 1997 to 2004 as a sedan or wagon. The body style decides the panel plan and the film amount. The sedan uses about 52 ft (16 m) of 60-inch cast film, while the wagon uses about 57 ft (17.5 m). If you choose chrome or patterned film, expect up to about 74 ft (22.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Alpina B10, second generation, factory photo
Factory color shown

1988–1996 Alpina B10 sedan, wagon (second generation)

1988–1996sedan, wagon (4 or 5 doors)185.8 in (4,720 mm)

The second generation Alpina B10 was built from 1988 to 1996 as a sedan or wagon. On a car of these years paint age is a key concern: panels may be original or repainted. A test spot comes before a full wrap to check that the film will adhere and remove cleanly. The wagon tailgate has the rear glass in it, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Alpina B10, first generation, factory photo
Factory color shown

1984–1987 Alpina B10 sedan (first generation)

1984–1987sedan (4 doors)181.9 in (4,620 mm)

The first generation Alpina B10 was built from 1984 to 1987 as a four-door sedan. Its length of 181.9 in (4,620 mm) and simple sedan shape keep the film amount to about 51 ft (15.5 m). There are no wagon panels, so the number of panels is lower than on later generations.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Alpina B10

A partial wrap on an Alpina B10 covers the roof, hood, or mirror caps. For a chrome delete, the installer wraps the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpina B10: body, cut-outs and film

An Alpina B10 vinyl wrap covers a full-size body that measures 181.9 in (4,620 mm) to 189.2 in (4,805 mm) depending on generation. The first generation is a four-door sedan only, while later generations add a wagon. A wagon has a taller tailgate and longer roof, so it uses more film than the sedan.

Alpina B10 wrap ideas include a full color change, a partial wrap, chrome delete, or paint protection film. On the second and third generation wagons the tailgate has the rear glass in it, so the film ends at the edge of the glass. For chrome delete the installer wraps the window trim and badges with black film.

To estimate how much vinyl to wrap an Alpina B10, check the generation and body style first. The third generation sedan needs about 52 ft (16 m) of 60-inch (1.52 m) film, while the wagon needs about 57 ft (17.5 m). The first generation uses about 51 ft (15.5 m) because it is shorter and sedan only.

Questions about wrapping an Alpina B10

How much vinyl does it take to wrap an Alpina B10?

It takes about 52 ft (16 m) to 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap the newest Alpina B10, depending on body style. The sedan needs about 52 ft (16 m) and the wagon needs about 57 ft (17.5 m). Chrome or patterned film can require up to about 74 ft (22.5 m).

Which Alpina B10 body takes more film?

The wagon takes more film than the sedan. On the third generation the wagon needs about 57 ft (17.5 m) while the sedan needs about 52 ft (16 m). The taller tailgate and longer roof add surface area.

Can I wrap only the hood or the roof of an Alpina B10?

Yes, you can wrap only the hood or the roof of an Alpina B10. A partial wrap covers those panels without wrapping the whole car. You can also do a chrome delete on the window trim and badges or add clear paint protection film to the front end.

Is an Alpina B10 hard to wrap?

An Alpina B10 is not especially hard to wrap, but the wagon tailgate adds work because the rear glass is in it. The film must end at the edge of the glass, and the large body size means more panels to cover. The oldest cars may need extra prep if the paint is aged.