Wraps by car

Alpina Roadster wrap

The Alpina Roadster wrap page covers the Alpina Roadster across its three generations, from the first generation of 1990–1991 to the third generation of 2003–2005. A full wrap of the newest body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film, or about 49 ft (15 m) for chrome or patterned film. Each generation is a convertible, so the vinyl wrap stops where the fabric or folding hard top begins.

3generations13 mof film for a full wrap

Alpina Roadster, third generation, factory photo
Alpina Roadster, third generation. Factory color shown.

Alpina Roadster wrap colors and ideas

  • Roadster black wrap
  • Roadster white wrap
  • Roadster gray wrap
  • Roadster silver wrap
  • Roadster red wrap
  • Roadster blue wrap
  • Roadster green wrap
  • Roadster yellow wrap
  • Roadster orange wrap
  • Roadster purple wrap
  • Roadster pink wrap
  • Roadster teal wrap
  • Roadster brown wrap
  • Roadster gold wrap
  • Roadster chrome wrap
  • Roadster color shift wrap
  • Roadster carbon fiber wrap
  • Roadster camo and patterned wrap

How much vinyl to wrap an Alpina Roadster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2005convertible (2 doors)161.0 in (4,090 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)
2002–2003convertible (2 doors)173.2 in (4,400 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1990–1991convertible (2 doors)155.5 in (3,950 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Roadster wrap cost factors

Roadster wrap cost for the Alpina Roadster depends on the film type, the number of panels, and the condition of the paint. A full wrap of the third generation uses about 43 ft (13 m) of 60-inch cast film, while a chrome or patterned film takes about 49 ft (15 m). Removing and reinstalling the door handles, mirrors, and badges adds labor hours to the job.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Roadster wraps by generation

Swipe sideways. Tap a card for the full description.

Alpina Roadster, third generation, factory photo
Factory color shown

2003–2005 Roadster convertible (third generation)

2003–2005convertible (2 doors)161.0 in (4,090 mm)

The open top of the third generation Alpina Roadster is a fabric top, and the vinyl film ends at the edge of the top well. The film is trimmed along the beltline and around the rear window, never onto the soft top itself. On a folding hard top, the roof panels are wrapped as separate pieces with the seams left to move.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Alpina Roadster, second generation, factory photo
Factory color shown

2002–2003 Roadster convertible (second generation)

2002–2003convertible (2 doors)173.2 in (4,400 mm)

Paint age on a second generation Alpina Roadster from 2002–2003 can vary between original and repainted panels. A test spot of the film on each panel checks adhesion before the full wrap, especially on the hood and the rear quarters. Repainted panels may need more cleaning and a longer tack time for the adhesive.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Alpina Roadster, first generation, factory photo
Factory color shown

1990–1991 Roadster convertible (first generation)

1990–1991convertible (2 doors)155.5 in (3,950 mm)

The first generation Alpina Roadster is the smallest at 155.5 in (3,950 mm), and its convertible body has the fewest panels to wrap. A full wrap uses about 43 ft (13 m) of 60-inch cast film, or about 48 ft (14.5 m) of chrome or patterned film. The short doors and low nose mean each panel is cut from a single piece with less waste.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Roadster

A partial wrap on the Alpina Roadster can cover the hood, mirror caps, and rear deck without wrapping the whole car. Roadster chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpina Roadster: body, cut-outs and film

An Alpina Roadster vinyl wrap must follow the lines of a small two-door convertible body. The first generation measures 155.5 in (3,950 mm) long, the second 173.2 in (4,400 mm), and the third 161.0 in (4,090 mm), which keeps the panel count low but the curves tight. The short rear deck and wide sills are wrapped in single pieces, while the doors and front fenders need careful relief cuts around the handles and vents.

Roadster wrap ideas for the Alpina Roadster start with the parts that need cut-outs or come off. The door handles, side marker lights, and front bumper grilles are removed or masked before the film goes on. The mirror caps and the narrow trim around the windshield are wrapped separately, and the rear badges are taken off and reinstalled after the film is down.

How much vinyl to wrap a Roadster changes little between the three generations of the Alpina Roadster, but the second generation is the longest at 173.2 in (4,400 mm) and needs about 46 ft (14 m) of 60-inch cast film. The first and third generations both need about 43 ft (13 m) of the same film, though the first is the shortest at 155.5 in (3,950 mm). Chrome or patterned film adds about three feet to each estimate because the pattern repeat changes the yield.

Questions about wrapping an Alpina Roadster

How much vinyl does it take to wrap an Alpina Roadster?

About 43 ft (13 m) of 60-inch (1.52 m) cast film is needed to wrap the newest Alpina Roadster, the third generation from 2003–2005. For chrome or patterned film, the estimate is about 49 ft (15 m) because the pattern repeat reduces the usable width.

Is the top of a Roadster wrapped?

No, the top of a Roadster is not wrapped. The fabric top of the Alpina Roadster is left uncovered, and the vinyl film ends at the edge of the top well where the soft top meets the body.

Can I wrap only the hood or the roof of a Roadster?

Yes, you can wrap only the hood or the roof of a Roadster. A partial wrap on the Alpina Roadster often covers the hood, mirror caps, and rear deck, while a chrome delete covers the window trim and badges.

Is a Roadster hard to wrap?

Yes, a Roadster is harder to wrap than a sedan because the convertible body has a fabric top that must be masked off and tight curves on the short panels. The Alpina Roadster's small size, from 155.5 in to 173.2 in long, means fewer panels but more fiddly trim work around the top and windshield.