Wraps by car

Alpina D10 wrap

The Alpina D10 wrap page covers the full-size sedan and wagon built from 1999 to 2003. It lists the film amounts for a complete vinyl wrap of each body style. Owners planning a color change or paint protection can size up the job here. The first and only generation is represented in this catalog.

1generations16 mof film for a full wrap

Alpina D10, first generation, factory photo
Alpina D10, first generation. Factory color shown.

Alpina D10 wrap colors and ideas

  • Alpina D10 black wrap
  • Alpina D10 white wrap
  • Alpina D10 gray wrap
  • Alpina D10 silver wrap
  • Alpina D10 red wrap
  • Alpina D10 blue wrap
  • Alpina D10 green wrap
  • Alpina D10 yellow wrap
  • Alpina D10 orange wrap
  • Alpina D10 purple wrap
  • Alpina D10 pink wrap
  • Alpina D10 teal wrap
  • Alpina D10 brown wrap
  • Alpina D10 gold wrap
  • Alpina D10 chrome wrap
  • Alpina D10 color shift wrap
  • Alpina D10 carbon fiber wrap
  • Alpina D10 camo and patterned wrap

How much vinyl to wrap an Alpina D10

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2003sedan, wagon (4 or 5 doors)188.0 in (4,775 mm) to 189.2 in (4,805 mm)about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Alpina D10 wrap cost factors

Alpina D10 wrap cost is driven by the sedan or wagon body, the film choice, and the labor for door jambs and trim. The sedan takes about 52 ft (16 m) of 60-inch (1.52 m) cast film, while the wagon takes about 57 ft (17.5 m). A color change wrap costs more than a partial wrap because every panel is covered. Chrome or patterned film can push the material use up to about 74 ft (22.5 m), which raises the material share of the job.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Alpina D10 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpina D10, first generation, factory photo
Factory color shown

1999–2003 Alpina D10 sedan, wagon (first generation)

1999–2003sedan, wagon (4 or 5 doors)188.0 in (4,775 mm) to 189.2 in (4,805 mm)

The first generation Alpina D10, produced from 1999 to 2003, was offered as a four-door sedan and a five-door wagon. The sedan panel plan is straightforward, while the wagon adds the tailgate with glass and a longer roof. Choosing the sedan lowers the film amount to about 52 ft (16 m) of 60-inch (1.52 m) cast film. Choosing the wagon raises it to about 57 ft (17.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Alpina D10

Partial wrap jobs on the Alpina D10 include the roof, hood, and mirror caps in a contrasting or matching film. An Alpina D10 chrome delete covers the window trim and badges with black film, and paint protection film (PPF) is clear film on the front end. These smaller jobs need less material and suit a focused change. You can start with the hood or roof and add panels later.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpina D10: body, cut-outs and film

An Alpina D10 vinyl wrap calls for a large car plan, with the sedan at 188.0 in (4,775 mm) and the wagon at 189.2 in (4,805 mm) in length. The sedan takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The wagon takes about 57 ft (17.5 m) because of its taller tailgate and longer roof. Both four-door and five-door styles need a full panel layout before cutting.

Alpina D10 wrap ideas should account for a tailgate with the rear glass in it. The film ends at the edge of the glass on the wagon, so the installer trims carefully around the window. The front and rear bumpers, door handles, mirrors, and trim pieces are removed or cut out for a clean finish. A patterned or chrome film can use up to about 74 ft (22.5 m) on this body.

How much vinyl to wrap an Alpina D10 depends on the body style you own. The sedan needs about 52 ft (16 m) of 60-inch (1.52 m) cast film. The wagon needs about 57 ft (17.5 m) to cover the extra rear panels. The first generation spans 1999–2003, but the two styles remain the key factor for film amounts.

Questions about wrapping an Alpina D10

How much vinyl does it take to wrap an Alpina D10?

Yes, an Alpina D10 takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for the sedan and about 57 ft (17.5 m) for the wagon.

Which Alpina D10 body takes more film?

The wagon takes more film than the sedan: about 57 ft (17.5 m) versus about 52 ft (16 m) of 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of an Alpina D10?

Yes, you can wrap only the hood or the roof of an Alpina D10, and a partial wrap also covers mirror caps.

Is an Alpina D10 hard to wrap?

An Alpina D10 is not the easiest wrap because of its size and the wagon's tailgate with the rear glass in it, where the film ends at the edge of the glass.