Alpina C1 wrap cost depends on the body style, the amount of film, and the labor for the curves and cut-outs. The coupe uses about 46 ft (14 m) of 60-inch (1.52 m) film, and the sedan uses about 48 ft (14.5 m). Chrome or patterned film raises the film amount to about 57–59 ft (17.5–18 m) because the pattern must be matched. Surface preparation takes longer on a car of these years, especially if the paint is older or has been repainted.

1983–1987 Alpina C1 coupe, sedan (second generation)
The second generation Alpina C1 was built from 1983 to 1987 as a coupe or a sedan with two or four doors. The body style decides the panel plan and the film amount: the coupe takes about 46 ft (14 m), and the sedan takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The sedan has two extra doors and a longer roof, so the installer cuts more door pieces and a larger roof section. This generation is 170.3 in (4,325 mm) long, and the panel shapes are typical for a mid-size car of the era.
Film: about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
