Wraps by car

Alpina B9 wrap

The Alpina B9 wrap covers the first-generation full-size sedan produced from 1981 to 1985. This page lists the materials and steps for a vinyl wrap on this car. A full wrap of the B9 body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Alpina B9, first generation, factory photo
Alpina B9, first generation. Factory color shown.

Alpina B9 wrap colors and ideas

  • Alpina B9 black wrap
  • Alpina B9 white wrap
  • Alpina B9 gray wrap
  • Alpina B9 silver wrap
  • Alpina B9 red wrap
  • Alpina B9 blue wrap
  • Alpina B9 green wrap
  • Alpina B9 yellow wrap
  • Alpina B9 orange wrap
  • Alpina B9 purple wrap
  • Alpina B9 pink wrap
  • Alpina B9 teal wrap
  • Alpina B9 brown wrap
  • Alpina B9 gold wrap
  • Alpina B9 chrome wrap
  • Alpina B9 color shift wrap
  • Alpina B9 carbon fiber wrap
  • Alpina B9 camo and patterned wrap

How much vinyl to wrap an Alpina B9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1985sedan (4 doors)181.9 in (4,620 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Alpina B9 wrap cost factors

The Alpina B9 wrap cost depends on the size of the car, the film chosen and the surface condition. A full wrap of this 181.9 in (4,620 mm) sedan takes more material and time than a partial job. Textured or chrome film raises the material amount to about 64 ft (19.5 m). Paint defects on a car of these years can also add preparation work.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Alpina B9 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpina B9, first generation, factory photo
Factory color shown

1981–1985 Alpina B9 sedan (first generation)

1981–1985sedan (4 doors)181.9 in (4,620 mm)

The first generation Alpina B9 is a sedan built from 1981 to 1985. Paint age is a key point on a car of these years, because some panels may be original and others repainted. Always do a test spot on each panel before a full wrap to check how the film sticks. A surface with old or weak paint may need correction first.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Alpina B9

A partial wrap on an Alpina B9 can cover the roof, hood or mirror caps. An Alpina B9 chrome delete is another smaller job: window trim and badges covered with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These options use less material and take less time than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpina B9: body, cut-outs and film

An Alpina B9 vinyl wrap uses the sedan body with four doors and a length of 181.9 in (4,620 mm). The four doors add extra film and trimming time compared with a two-door coupe. The long roof and large hood need careful planning of panel seams. You can wrap the whole body as one project or plan it in sections.

For Alpina B9 wrap ideas, think about which parts will be covered and which will stay painted. The door handles, trim pieces and badges are usually removed before the film goes on. The front bumper and grille area need cut-outs for lights and air intakes. The mirror caps can be wrapped separately for a two-tone look.

When you figure how much vinyl to wrap an Alpina B9, remember that this page covers one generation only, the 1981–1985 sedan. There are no earlier or later bodies to compare, so the film estimate stays the same for all cars of this model. The listed amount is a starting point for a full wrap with no major repairs. Buying a little extra film is wise for test panels and mistakes.

Questions about wrapping an Alpina B9

How much vinyl does it take to wrap an Alpina B9?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap an Alpina B9. That figure is for a full wrap of the sedan body with normal film. If you use chrome or patterned film, the estimate rises to about 64 ft (19.5 m).

Can I wrap only the hood or the roof of an Alpina B9?

Yes, you can wrap only the hood or the roof of an Alpina B9. A partial wrap is a smaller job that covers just one or two panels, like the roof, hood or mirror caps. You can also do a chrome delete on the window trim and badges or apply clear paint protection film on the front end.

Is an Alpina B9 hard to wrap?

Yes, an Alpina B9 can be harder to wrap than some cars because of its size and age. It is a full-size sedan at 181.9 in (4,620 mm) long, so there is more film to handle. The four doors and long roof mean more trimming and more places for the film to lift. On a car from 1981–1985, old paint may need extra preparation before wrapping.

How many generations of the Alpina B9 does this page cover?

This page covers one generation of the Alpina B9. The first generation ran from 1981 to 1985 as a sedan with four doors. There are no other generations in the catalog, so all information here applies to that single body style.