Wraps by car

Alpina B6 wrap

The Alpina B6 wrap guide covers five generations of the full-size Alpina B6, from 1978 to 2017. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) on the convertible. The sedan needs up to 56 ft (17 m) of 60-inch (1.52 m) cast film. This page explains how much film each generation uses and what the installer must handle.

5generations15.5 mof film for a full wrap

Alpina B6, fifth generation, factory photo
Alpina B6, fifth generation. Factory color shown.

Alpina B6 wrap colors and ideas

  • Alpina B6 black wrap
  • Alpina B6 white wrap
  • Alpina B6 gray wrap
  • Alpina B6 silver wrap
  • Alpina B6 red wrap
  • Alpina B6 blue wrap
  • Alpina B6 green wrap
  • Alpina B6 yellow wrap
  • Alpina B6 orange wrap
  • Alpina B6 purple wrap
  • Alpina B6 pink wrap
  • Alpina B6 teal wrap
  • Alpina B6 brown wrap
  • Alpina B6 gold wrap
  • Alpina B6 chrome wrap
  • Alpina B6 color shift wrap
  • Alpina B6 carbon fiber wrap
  • Alpina B6 camo and patterned wrap

How much vinyl to wrap an Alpina B6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2017convertible, coupe, sedan (2 or 4 doors)192.7 in (4,894 mm) to 197.1 in (5,007 mm)about 51 ft (15.5 m) for the convertible to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
2005–2010convertible, coupe (2 doors)190.1 in (4,829 mm)about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1992–1993coupe, sedan (2 or 4 doors)170.3 in (4,325 mm)about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
1984–1990coupe, sedan (2 or 4 doors)170.3 in (4,325 mm)about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
1978–1983coupe (2 doors)171.5 in (4,355 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Alpina B6 wrap cost factors

Alpina B6 wrap cost depends on the film amount and the labor of the body style. The newest convertible or sedan takes 51 ft (15.5 m) to 56 ft (17 m) of cast film, while a coupe of the fourth generation needs about 52 ft (16 m). Sunroofs, fog lamps, and convertible tops add cut-out time. Older generations need less film, but paint condition can add preparation work.

  • Film for a full wrap: about 51 ft (15.5 m) for the convertible to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2015: bumpers and lights differ between the versions, and so do the film cuts.

Alpina B6 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpina B6, fifth generation, factory photo
Factory color shown

2011–2017 Alpina B6 convertible, coupe, sedan (fifth generation)

2011–2017convertible, coupe, sedan (2 or 4 doors)192.7 in (4,894 mm) to 197.1 in (5,007 mm)

The open top of the fifth-generation Alpina B6 affects the wrap directly. A fabric convertible top is not wrapped, and the film ends where the top meets the body. A folding hard top is wrapped as panels of its own, with seams between them. The installer measures each panel so the wrap does not interfere with the top opening or closing.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 51 ft (15.5 m) for the convertible to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Alpina B6, fourth generation, factory photo
Factory color shown

2005–2010 Alpina B6 convertible, coupe (fourth generation)

2005–2010convertible, coupe (2 doors)190.1 in (4,829 mm)

The fourth-generation Alpina B6 came as a convertible or coupe, and the body style decides the panel plan and film amount. The coupe uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. The convertible needs about 51 ft (15.5 m), but its top is left unwrapped. Two long side doors on this generation are each covered with one large piece of film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Alpina B6, third generation, factory photo
Factory color shown

1992–1993 Alpina B6 coupe, sedan (third generation)

1992–1993coupe, sedan (2 or 4 doors)170.3 in (4,325 mm)

Paint age on a third-generation Alpina B6 from 1992–1993 can vary between original and repainted panels. Before a full wrap, the installer does a test spot on each panel to check how the film adheres. Repainted areas may hold film differently, so the wrap plan may need adjustment. This step prevents lifting or damage when the film is removed.

Film: about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Alpina B6, second generation, factory photo
Factory color shown

1984–1990 Alpina B6 coupe, sedan (second generation)

1984–1990coupe, sedan (2 or 4 doors)170.3 in (4,325 mm)

The second-generation Alpina B6 from 1984–1990 is a compact full-size car at 170.3 in (4,325 mm) long. A coupe or sedan of this generation needs about 46 ft (14 m) to 48 ft (14.5 m) of film. The body has fewer large panels, so the installer can cut the film more economically. A chrome or patterned film raises the total to about 59 ft (18 m).

Film: about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Alpina B6, first generation, factory photo
Factory color shown

1978–1983 Alpina B6 coupe (first generation)

1978–1983coupe (2 doors)171.5 in (4,355 mm)

The first-generation Alpina B6 from 1978–1983 is a small coupe at 171.5 in (4,355 mm) long. A full wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. The two long side doors are each one large piece of film, which simplifies the panel plan. With chrome or patterned film, the amount rises to about 57 ft (17.5 m).

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Alpina B6

An Alpina B6 chrome delete covers the window trim and badges with black film. A partial wrap can be the roof, hood, or mirror caps instead of the whole car. Paint protection film (PPF) is a clear film applied to the front end. These options use less film than a full wrap and focus on specific areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpina B6: body, cut-outs and film

An Alpina B6 vinyl wrap has to follow the body style of each generation. The fifth generation (2011–2017) came as a convertible, coupe, and sedan, with lengths from 192.7 in (4,894 mm) to 197.1 in (5,007 mm). The fourth generation (2005–2010) was only a convertible or coupe and is shorter at 190.1 in (4,829 mm). Earlier generations are smaller, so the panel plan changes and the film amount drops.

Alpina B6 wrap ideas must respect the parts that need cut-outs or come off. Every trim of the fifth generation has a sunroof, so the roof film is cut around its opening. Fog lamps in the front bumper also require cut-outs in the bumper film. On a convertible with a fabric top, the top is not wrapped and the film ends where the top begins.

How much vinyl to wrap an Alpina B6 depends on the generation and body style. The first and second generations need about 46 ft (14 m) for a coupe or 48 ft (14.5 m) for a sedan. The third generation uses the same amount. For the newest generation, a chrome or patterned film can raise the total to about 69 ft (21 m).

Questions about wrapping an Alpina B6

How much vinyl does it take to wrap an Alpina B6?

About 51 ft (15.5 m) on the convertible to 56 ft (17 m) on the sedan of 60-inch (1.52 m) cast film is needed to wrap the newest Alpina B6. The coupe of the fourth generation uses about 52 ft (16 m). Chrome or patterned film can raise the total to about 69 ft (21 m).

Is the top of an Alpina B6 wrapped?

No, the fabric top of an Alpina B6 convertible is not wrapped. The film ends where the fabric top begins. A folding hard top, if fitted, is wrapped as panels of its own.

Can the roof of an Alpina B6 be wrapped?

Yes, the roof of an Alpina B6 can be wrapped. On the fifth generation every trim has a sunroof, so the roof film is cut around its opening. This cut-out is part of a standard partial wrap.

Which years of the Alpina B6 take the same film cuts?

The fifth-generation Alpina B6 from 2011–2017 takes the same film cuts after its 2015 restyling. The fourth generation from 2005–2010 is different. Earlier generations from 1978–1993 have their own patterns.