Wraps by car

Alpina B4 wrap

This catalog page covers the Alpina B4 wrap, a mid-size BMW-based performance car produced in two generations. The newest body is a four-door sedan that runs from 2022 onward and needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl film for a full wrap. The earlier generation from 2012 to 2022 was sold as a coupe and convertible and takes between 49 ft (15 m) and 51 ft (15.5 m) of the same film.

2generations16.5 mof film for a full wrap

Alpina B4, second generation, factory photo
Alpina B4, second generation. Factory color shown.

Alpina B4 wrap colors and ideas

  • Alpina B4 black wrap
  • Alpina B4 white wrap
  • Alpina B4 gray wrap
  • Alpina B4 silver wrap
  • Alpina B4 red wrap
  • Alpina B4 blue wrap
  • Alpina B4 green wrap
  • Alpina B4 yellow wrap
  • Alpina B4 orange wrap
  • Alpina B4 purple wrap
  • Alpina B4 pink wrap
  • Alpina B4 teal wrap
  • Alpina B4 brown wrap
  • Alpina B4 gold wrap
  • Alpina B4 chrome wrap
  • Alpina B4 color shift wrap
  • Alpina B4 carbon fiber wrap
  • Alpina B4 camo and patterned wrap

How much vinyl to wrap an Alpina B4

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowsedan (4 doors)188.7 in (4,792 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2012–2022convertible, coupe (2 doors)182.7 in (4,640 mm)about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Alpina B4 wrap cost factors

The Alpina B4 wrap cost depends on the film type, the size of the car, and the amount of disassembly the job requires. A full wrap of the current sedan calls for about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the first-generation coupe and convertible take between 49 ft (15 m) and 51 ft (15.5 m). Chrome delete or patterned film raises the material count because more film is needed to cover the bright trim and line up the pattern. Paint condition also matters: a test spot on an older panel shows whether the film will stick well before the full wrap begins.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Alpina B4 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpina B4, second generation, factory photo
Factory color shown

2022–now Alpina B4 sedan (second generation)

2022–nowsedan (4 doors)188.7 in (4,792 mm)

The second-generation Alpina B4 is a four-door sedan built from 2022 onward, and its size is 188.7 in (4,792 mm) long. That larger body and fixed roof mean more film and more separate panels than the earlier two-door models. For a full wrap, you need about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, or about 69 ft (21 m) if the film is chrome or patterned.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Alpina B4, first generation, factory photo
Factory color shown

2012–2022 Alpina B4 convertible, coupe (first generation)

2012–2022convertible, coupe (2 doors)182.7 in (4,640 mm)

The first-generation Alpina B4 was built from 2012 to 2022 as a two-door coupe and convertible, with a body 182.7 in (4,640 mm) long. On a car of these years, some panels may have been repainted, and a paint test spot before the full wrap tells you if the surface is sound. A convertible with a fabric top is not wrapped over the roof, so the film ends where the fabric begins. The coupe takes about 51 ft (15.5 m) and the convertible about 49 ft (15 m) of 60-inch (1.52 m) cast film, or up to about 62 ft (19 m) for chrome or patterned film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Alpina B4

An Alpina B4 partial wrap can cover just the roof, hood, and mirror caps, which is a smaller job than a full color change. Aluminum window trim and badges can be covered with black film in a chrome delete, and clear paint protection film (PPF) can be applied to the front end only. These options let you change a few areas without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpina B4: body, cut-outs and film

An Alpina B4 vinyl wrap follows the car's body lines, and the size of this car sets the material count for each project. The current sedan is 188.7 in (4,792 mm) long, while the first-generation coupe and convertible are shorter at 182.7 in (4,640 mm). A longer body and a fixed roof mean more film and more panels than a shorter convertible, while the two-door cars have larger side doors that use one big piece each.

Alpina B4 wrap ideas include a full color change, a partial wrap, or paint protection film on the front end. On the first-generation convertible, the fabric top is not wrapped and the film ends where the roof begins, but a folding hard top can be wrapped as panels of its own. The two long side doors of the coupe and convertible each take one large piece of film, which calls for careful squeegee work. All trims and badges are removed for a clean edge, then reinstalled after the film is laid down.

To find how much vinyl to wrap an Alpina B4, you compare the two generations and their body styles. The current sedan needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the first-generation convertible uses about 49 ft (15 m) and the coupe about 51 ft (15.5 m). If you choose chrome or patterned film, the estimates rise to about 69 ft (21 m) for the sedan and up to about 62 ft (19 m) for the earlier cars. These numbers cover the outside surfaces only and do not include door jambs or other hidden areas.

Questions about wrapping an Alpina B4

How much vinyl does it take to wrap an Alpina B4?

About 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl film is needed to wrap the newest Alpina B4 sedan. That figure is for a full color change wrap of the outside surfaces and does not include door jambs or extra film for mistakes.

Can I wrap only the hood or the roof of an Alpina B4?

Yes, you can wrap only the hood or the roof of an Alpina B4. A partial wrap on the roof, hood, and mirror caps is a standard option, and you can also do a chrome delete on the window trim and badges or clear paint protection film on the front end.

Is an Alpina B4 hard to wrap?

An Alpina B4 is not the easiest car to wrap because of its size and some body details. The current sedan is 188.7 in (4,792 mm) long, and the first-generation coupe and convertible have two long side doors that each take one large piece of film. On a convertible with a fabric top, the film must end cleanly where the roof begins.

How many generations of the Alpina B4 does this page cover?

This page covers two generations of the Alpina B4. The first generation ran from 2012 to 2022 as a coupe and convertible, and the second generation has been produced from 2022 onward as a sedan.