Wraps by car

Alpina B11 wrap

The Alpina B11 wrap page covers the first generation of the luxury sedan built from 1987 to 1994. A full vinyl wrap of this E32-based car takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, allow about 67 ft (20.5 m) for the same body.

1generations16.5 mof film for a full wrap

Alpina B11, first generation, factory photo
Alpina B11, first generation. Factory color shown.

Alpina B11 wrap colors and ideas

  • Alpina B11 black wrap
  • Alpina B11 white wrap
  • Alpina B11 gray wrap
  • Alpina B11 silver wrap
  • Alpina B11 red wrap
  • Alpina B11 blue wrap
  • Alpina B11 green wrap
  • Alpina B11 yellow wrap
  • Alpina B11 orange wrap
  • Alpina B11 purple wrap
  • Alpina B11 pink wrap
  • Alpina B11 teal wrap
  • Alpina B11 brown wrap
  • Alpina B11 gold wrap
  • Alpina B11 chrome wrap
  • Alpina B11 color shift wrap
  • Alpina B11 carbon fiber wrap
  • Alpina B11 camo and patterned wrap

How much vinyl to wrap an Alpina B11

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1994sedan (4 doors)193.3 in (4,910 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Alpina B11 wrap cost factors

Alpina B11 wrap cost depends on the size of the car, the film choice, and the condition of the paint. The long body needs about 54 ft (16.5 m) of cast film, and film cost changes with the brand and finish. A car of these years may need more prep time if the paint is original or repainted, which adds labor.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Alpina B11 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpina B11, first generation, factory photo
Factory color shown

1987–1994 Alpina B11 sedan (first generation)

1987–1994sedan (4 doors)193.3 in (4,910 mm)

The first generation Alpina B11 is a luxury sedan from 1987 to 1994 based on the BMW E32 platform. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The installer checks adhesion on each panel because old paint can differ across the body.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Alpina B11

Alpina B11 chrome delete covers the window trim and badges with black film, and it is a smaller job than a full wrap. A partial wrap can be just the roof, hood or mirror caps if you want to change only part of the car. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpina B11: body, cut-outs and film

The Alpina B11 vinyl wrap is shaped by the single sedan body style of this generation. The car measures 193.3 in (4,910 mm) long, which means fewer seams but longer panels to stretch film over. Four doors and a fixed roof keep the wrap straightforward with no convertible or wagon complications.

Alpina B11 wrap ideas begin with the chrome trim, door handles, badges and the long side moldings. These parts are removed or masked for clean cut-outs before film is applied. The front bumper and mirrors also come off to wrap edges properly.

How much vinyl to wrap an Alpina B11 depends on the film type, not the generation, since this page covers the first generation only. The 1987–1994 sedan is the only body, so the 54 ft (16.5 m) figure applies to every car of these years. For chrome or patterned film, the estimate rises to about 67 ft (20.5 m) because matching patterns needs extra material.

Questions about wrapping an Alpina B11

How much vinyl does it take to wrap an Alpina B11?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap an Alpina B11. For chrome or patterned film, you need about 67 ft (20.5 m) for the same sedan body.

Can I wrap only the hood or the roof of an Alpina B11?

Yes, a partial wrap can be the roof, hood or mirror caps of an Alpina B11. You can also do a chrome delete on the window trim and badges, or apply paint protection film to the front end.

Is an Alpina B11 hard to wrap?

Yes, an Alpina B11 is hard to wrap because of its size and age. The long body needs careful stretching of film over large panels, and old or repainted paint must be tested before the full wrap.

How many generations of the Alpina B11 does this page cover?

This page covers one generation of the Alpina B11, the first generation from 1987 to 1994.