Wraps by car

Alpina XB7 wrap

The Alpina XB7 wrap page covers the current single-generation XB7 SUV, produced since 2020. A full vinyl wrap of the newest body takes about 69 feet (21 meters) of 60-inch (1.52 meter) cast film. The car measures 202.8 to 203.9 inches (5,151 to 5,178 millimeters) long, so a wrap uses more film than a smaller SUV.

1generations21 mof film for a full wrap

Alpina XB7, first generation, factory photo
Alpina XB7, first generation. Factory color shown.

Alpina XB7 wrap colors and ideas

  • Alpina XB7 black wrap
  • Alpina XB7 white wrap
  • Alpina XB7 gray wrap
  • Alpina XB7 silver wrap
  • Alpina XB7 red wrap
  • Alpina XB7 blue wrap
  • Alpina XB7 green wrap
  • Alpina XB7 yellow wrap
  • Alpina XB7 orange wrap
  • Alpina XB7 purple wrap
  • Alpina XB7 pink wrap
  • Alpina XB7 teal wrap
  • Alpina XB7 brown wrap
  • Alpina XB7 gold wrap
  • Alpina XB7 chrome wrap
  • Alpina XB7 color shift wrap
  • Alpina XB7 carbon fiber wrap
  • Alpina XB7 camo and patterned wrap

How much vinyl to wrap an Alpina XB7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)202.8 in (5,151 mm) to 203.9 in (5,178 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Alpina XB7 wrap cost factors

The Alpina XB7 wrap cost depends on film type, body version, and how much of the car is wrapped. A full wrap needs about 69 feet (21 meters) of cast film, while chrome or patterned film raises the amount to about 87 feet (26.5 meters). The restyling in 2022 means film patterns differ between early and late models, which can affect labor. Additional work like removing door handles or wrapping the roof from a platform also changes the final cost.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (70.7 in (1,797 mm)): the roof is wrapped from a platform.
  • Restyled in 2022: bumpers and lights differ between the versions, and so do the film cuts.

Alpina XB7 wraps by generation

Swipe sideways. Tap a card for the full description.

Alpina XB7, first generation, factory photo
Factory color shown

2020–now Alpina XB7 SUV (first generation)

2020–nowSUV (5 doors)202.8 in (5,151 mm) to 203.9 in (5,178 mm)

The first generation Alpina XB7 was introduced for 2020 and received a restyling in 2022. The restyling changed the bumpers and lights, so film cut for the 2020–2021 version does not fit the 2022–now version. For a wrap, the 2022 and later cars need different templates for the front and rear ends. When ordering a pre-cut kit, you must match the kit to the production year of the vehicle.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (70.7 in (1,797 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on an Alpina XB7

A partial wrap on an Alpina XB7 can cover the roof, hood, or mirror caps as separate jobs. Chrome delete on this car typically covers the window trim and badges with black film. Paint protection film (PPF) is another option, where clear film is applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done without wrapping the entire body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alpina XB7: body, cut-outs and film

The Alpina XB7 vinyl wrap has to cover a five-door SUV body with a tall profile of 70.7 inches (1,797 millimeters). The long roof and large side panels mean you need the full 69 feet (21 meters) of film. Because the tailgate includes the rear glass, the film ends cleanly at the glass edge. A full wrap on this car is a large job that benefits from careful planning.

Alpina XB7 wrap ideas start with the tall body, where the roof is best wrapped from a platform for safe access. The tailgate has the rear glass set into it, so the film must be trimmed exactly to the glass edge. Door handles, badges, and the front bumper may need removal or cut-outs for a clean finish. The large side mirrors also require extra time to wrap without seams.

How much vinyl to wrap an Alpina XB7 depends on the body version, because the 2022 restyling changed the bumpers and lights. Film cut for a 2020 or 2021 XB7 does not fit a 2022 or later model, and the reverse is also true. For a standard color change you need about 69 feet (21 meters), but chrome or patterned film takes about 87 feet (26.5 meters). The difference comes from the extra material needed to match patterns and cover bright trim.

Questions about wrapping an Alpina XB7

How much vinyl does it take to wrap an Alpina XB7?

A full wrap of an Alpina XB7 takes about 69 feet (21 meters) of 60-inch (1.52 meter) cast film. That figure is for the newest body style with a standard color change wrap. If you use chrome or patterned film, the amount increases to about 87 feet (26.5 meters).

Which years of the Alpina XB7 take the same film cuts?

The 2020 and 2021 Alpina XB7 models take the same film cuts, and the 2022 to current models take the same cuts. The restyling in 2022 changed the bumpers and lights, so film patterns for the earlier cars do not fit the later cars. Be sure to specify the production year when ordering pre-cut film.

Can I wrap only the hood or the roof of an Alpina XB7?

Yes, you can wrap only the hood or the roof of an Alpina XB7. A partial wrap on this car often covers the roof, hood, or mirror caps. Chrome delete is another partial option that covers the window trim and badges with black film.

Is an Alpina XB7 hard to wrap?

The Alpina XB7 is not especially hard to wrap, but its size and details add work. The body is 202.8 to 203.9 inches (5,151 to 5,178 millimeters) long and 70.7 inches (1,797 millimeters) tall, so the roof is best wrapped from a platform. The tailgate has the rear glass set into it, which requires careful trimming at the glass edge.