Wraps by car

Daihatsu Applause wrap

The Daihatsu Applause wrap covers the first generation compact liftback produced from 1989 to 1999. This catalog includes one generation, with a restyling in 1997. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Daihatsu Applause, first generation, factory photo
Daihatsu Applause, first generation. Factory color shown.

Daihatsu Applause wrap colors and ideas

  • Applause black wrap
  • Applause white wrap
  • Applause gray wrap
  • Applause silver wrap
  • Applause red wrap
  • Applause blue wrap
  • Applause green wrap
  • Applause yellow wrap
  • Applause orange wrap
  • Applause purple wrap
  • Applause pink wrap
  • Applause teal wrap
  • Applause brown wrap
  • Applause gold wrap
  • Applause chrome wrap
  • Applause color shift wrap
  • Applause carbon fiber wrap
  • Applause camo and patterned wrap

How much vinyl to wrap a Daihatsu Applause

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1999liftback (4 or 5 doors)167.7 in (4,260 mm) to 171.3 in (4,350 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Applause wrap cost factors

The Applause wrap cost depends on the size of the car and the film you pick. A full wrap needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film pushes the estimate to about 61 ft (18.5 m). The number of doors, four or five, changes cutting time but not the film area.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: liftback (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1997: bumpers and lights differ between the versions, and so do the film cuts.

Applause wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Applause, first generation, factory photo
Factory color shown

1989–1999 Applause liftback (first generation)

1989–1999liftback (4 or 5 doors)167.7 in (4,260 mm) to 171.3 in (4,350 mm)

The first generation Daihatsu Applause was built from 1989 to 1999 as a compact liftback. In 1997 the car received a restyling with new bumpers and lights. Film cut for the earlier version will not fit the restyled front or rear. Owners counting film should order separate patterns for pre- and post-1997 cars.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an Applause

The Applause suits partial wrap jobs like the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) goes on the front end as a clear shield. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Applause: body, cut-outs and film

A Daihatsu Applause vinyl wrap must follow the liftback shape with 4 or 5 doors. The car measures 167.7 in (4,260 mm) to 171.3 in (4,350 mm) long, so the film runs along the full side panels. The four-door and five-door styles change only the number of door cut lines. The compact size keeps the job manageable for one installer with a helper.

Applause wrap ideas often start with the tailgate, where the rear glass sits inside the panel. The film ends at the edge of the glass, so you trim neatly around the window opening. The door handles and mirrors come off for a cleaner install. The bumpers stay on, but film must be tucked into the trim lines.

To know how much vinyl to wrap an Applause, compare the pre- and post-1997 cars. The restyling changed the bumpers and lights, but the body length stayed between 167.7 in (4,260 mm) and 171.3 in (4,350 mm). Film from the same roll still covers the doors and roof. Only the front and rear bumper patterns differ.

Questions about wrapping a Daihatsu Applause

How much vinyl does it take to wrap a Daihatsu Applause?

A full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl. The estimate covers the newest Daihatsu Applause body from 1997 to 1999. Chrome or patterned film needs about 61 ft (18.5 m) instead.

Which years of the Applause take the same film cuts?

The Daihatsu Applause was built from 1989 to 1999, with a restyling in 1997. Film for the front and rear bumpers changes between the early and late versions. The rest of the body uses the same cuts for all years.

Can I wrap only the hood or the roof of an Applause?

Yes, you can wrap only the hood or the roof of a Daihatsu Applause. Partial jobs also include mirror caps and chrome delete on the window trim and badges. Paint protection film on the front end is another smaller option.

Is an Applause hard to wrap?

An Applause is not hard to wrap, but the tailgate adds work. The rear glass sits inside the panel, so the film ends at the edge of the glass. The 167.7 in (4,260 mm) to 171.3 in (4,350 mm) body is compact, which helps with handling film.