Wraps by car

Daihatsu Charade wrap

The Daihatsu Charade wrap page covers four generations from 1977 to 2000. A full vinyl wrap on the newest body takes about 44 ft (13.5 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film. The early cars are lighter and shorter, so a wrap needs slightly less material. Installers use these figures to plan a color change or paint protection on this subcompact.

4generations14 mof film for a full wrap

Daihatsu Charade, fourth generation, factory photo
Daihatsu Charade, fourth generation. Factory color shown.

Daihatsu Charade wrap colors and ideas

  • Charade black wrap
  • Charade white wrap
  • Charade gray wrap
  • Charade silver wrap
  • Charade red wrap
  • Charade blue wrap
  • Charade green wrap
  • Charade yellow wrap
  • Charade orange wrap
  • Charade purple wrap
  • Charade pink wrap
  • Charade teal wrap
  • Charade brown wrap
  • Charade gold wrap
  • Charade chrome wrap
  • Charade color shift wrap
  • Charade carbon fiber wrap
  • Charade camo and patterned wrap

How much vinyl to wrap a Daihatsu Charade

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2000hatchback, sedan (3 or 4 or 5 doors)147.6 in (3,750 mm) to 160.8 in (4,085 mm)about 44 ft (13.5 m) for the hatchback to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
1987–1992hatchback, sedan (3 or 4 or 5 doors)142.1 in (3,610 mm)about 39 ft (12 m) for the sedan to 43 ft (13 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 52 ft (16 m)
1983–1986hatchback (3 or 5 doors)139.0 in (3,530 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)
1977–1983hatchback (3 or 5 doors)136.2 in (3,460 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Charade wrap cost factors

Charade wrap cost depends on the film used, the body, and how much of the car is covered. A full color change on a fourth generation Charade takes 44 to 46 ft (13.5 to 14 m) of cast vinyl, which is more material than the third generation's 39 to 43 ft (12 to 13 m). Chrome or patterned film adds waste from matching the pattern, so the same car may need up to 57 ft (17.5 m). The installer's labor to remove mirrors, bumpers, and trim also affects the final cost, and a partial wrap uses less film than a full wrap.

  • Film for a full wrap: about 44 ft (13.5 m) for the hatchback to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: hatchback, sedan (3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1995: bumpers and lights differ between the versions, and so do the film cuts.

Charade wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Charade, fourth generation, factory photo
Factory color shown

1993–2000 Charade hatchback, sedan (fourth generation)

1993–2000hatchback, sedan (3 or 4 or 5 doors)147.6 in (3,750 mm) to 160.8 in (4,085 mm)

The fourth generation Daihatsu Charade ran from 1993 to 2000 and was restyled in 1995. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. An installer must check the build date and compare the front and rear ends before cutting panels. This generation offers a hatchback or sedan with 3, 4, or 5 doors and measures from 147.6 in (3,750 mm) to 160.8 in (4,085 mm) long.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the hatchback to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Daihatsu Charade, third generation, factory photo
Factory color shown

1987–1992 Charade hatchback, sedan (third generation)

1987–1992hatchback, sedan (3 or 4 or 5 doors)142.1 in (3,610 mm)

The third generation Daihatsu Charade ran from 1987 to 1992 as a hatchback or sedan with 3, 4, or 5 doors. The body style decides the panel plan and the film amount, so the sedan is longer and has a separate trunk lid. A hatchback wrap takes about 43 ft (13 m) of 60-inch (1.52 m) film, while the sedan takes about 39 ft (12 m). This generation is shorter overall than the fourth generation at 142.1 in (3,610 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 39 ft (12 m) for the sedan to 43 ft (13 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 52 ft (16 m).

Daihatsu Charade, second generation, factory photo
Factory color shown

1983–1986 Charade hatchback (second generation)

1983–1986hatchback (3 or 5 doors)139.0 in (3,530 mm)

The second generation Daihatsu Charade ran from 1983 to 1986 as a 3 or 5 door hatchback. Paint age matters on a car of these years, because panels may be original or repainted, and a test spot comes before a full wrap. An installer will check adhesion and look for peeling clear coat or rust under the film. A full wrap takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film on a body measuring 139.0 in (3,530 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Daihatsu Charade, first generation, factory photo
Factory color shown

1977–1983 Charade hatchback (first generation)

1977–1983hatchback (3 or 5 doors)136.2 in (3,460 mm)

The first generation Daihatsu Charade ran from 1977 to 1983 as a 3 or 5 door hatchback. Its size and body style mean a full wrap takes about 41 ft (12.5 m) of 60-inch (1.52 m) film, which is a small amount for a full car. The short body at 136.2 in (3,460 mm) reduces the size of the roof, hood, and quarter panels. With a tailgate that includes the glass, the film ends at the window edge, and the number of panels stays the same as later hatchbacks.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Charade

A partial wrap on a Daihatsu Charade can cover the roof, hood, or mirror caps as a smaller job. A chrome delete replaces bright trim with black film on the window trim and badges, and it works well on any generation. Paint protection film (PPF) is a clear film applied to the front end to absorb stone chips and road rash. Owners often combine a hood wrap with PPF on the bumper, and the small panels make a partial wrap take less film than a full color change.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Charade: body, cut-outs and film

The Daihatsu Charade vinyl wrap starts with the body style and the size of each generation. Every body is a hatchback, and three generations also offered a sedan with a longer rear deck. A full wrap on the fourth generation sedan takes about 46 ft (14 m) of film, while the hatchback takes about 44 ft (13.5 m). The third generation reverses that pattern: the hatchback takes about 43 ft (13 m) and the sedan takes about 39 ft (12 m).

Charade wrap ideas begin with the parts every generation shares. All four generations have a tailgate with the rear glass in it, so the film ends at the edge of the glass. Door handles, mirrors, and body-side moldings should come off for a clean, tuck-free install. The roof and hood are single panels, but the bumpers often need relief cuts to follow their shape.

Knowing how much vinyl to wrap a Charade means comparing the four generations. The first and second generations take about 41 ft (12.5 m) of 60-inch (1.52 m) film on the hatchback. The third generation sits between 39 ft (12 m) for the sedan and 43 ft (13 m) for the hatchback, a narrow range for a car that grew only slightly longer. The fourth generation is the largest, and its two body styles run from 44 ft (13.5 m) to 46 ft (14 m).

Questions about wrapping a Daihatsu Charade

How much vinyl does it take to wrap a Daihatsu Charade?

A full wrap on a fourth generation Daihatsu Charade takes about 44 ft (13.5 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film. The hatchback uses the lower figure, and the sedan uses the higher figure. Chrome or patterned film can push the total to 57 ft (17.5 m) because of extra waste. The third generation is smaller and needs about 39 to 43 ft (12 to 13 m).

Which years of the Charade take the same film cuts?

The fourth generation Daihatsu Charade was produced from 1993 to 2000, but a restyling in 1995 means that 1993-1995 and 1996-2000 cars do not share the same cuts. The bumpers and lights changed, so an installer needs to know which version of the fourth generation you have. The third generation (1987-1992) has its own film cuts for hatchback and sedan. Earlier generations (1977-1986) also have unique patterns, so no two generations share the same set of templates.

Which Charade body takes more film?

The fourth generation Daihatsu Charade sedan takes more film than the hatchback: about 46 ft (14 m) versus 44 ft (13.5 m). In the third generation the situation is reversed, and the hatchback takes about 43 ft (13 m) while the sedan takes about 39 ft (12 m). The first and second generations are hatchbacks only and take about 41 ft (12.5 m). Overall, the largest and longest fourth generation sedan needs the most material.

Can I wrap only the hood or the roof of a Charade?

Yes, you can wrap only the hood or the roof of a Daihatsu Charade. These are simple, flat panels on every generation, so a partial wrap uses a fraction of the film needed for a full wrap. Mirror caps are another small job, and all of these can be done in a contrasting color or a carbon-pattern film. A chrome delete on window trim and badges is also possible without wrapping the whole car.