Wraps by car

Daihatsu Delta Wagon wrap

The Daihatsu Delta Wagon wrap page covers both generations of this tall minivan, produced from 1982 to 2001. A full vinyl wrap of the newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. The second generation needs roughly 64 ft (19.5 m) of the same film width.

2generations20.5 mof film for a full wrap

Daihatsu Delta Wagon, third generation, factory photo
Daihatsu Delta Wagon, third generation. Factory color shown.

Daihatsu Delta Wagon wrap colors and ideas

  • Delta Wagon black wrap
  • Delta Wagon white wrap
  • Delta Wagon gray wrap
  • Delta Wagon silver wrap
  • Delta Wagon red wrap
  • Delta Wagon blue wrap
  • Delta Wagon green wrap
  • Delta Wagon yellow wrap
  • Delta Wagon orange wrap
  • Delta Wagon purple wrap
  • Delta Wagon pink wrap
  • Delta Wagon teal wrap
  • Delta Wagon brown wrap
  • Delta Wagon gold wrap
  • Delta Wagon chrome wrap
  • Delta Wagon color shift wrap
  • Delta Wagon carbon fiber wrap
  • Delta Wagon camo and patterned wrap

How much vinyl to wrap a Daihatsu Delta Wagon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2001van (5 doors)180.9 in (4,595 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
1982–1996van (4 doors)171.7 in (4,360 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Delta Wagon wrap cost factors

Delta Wagon wrap cost depends on the film type and the generation of the van. The third generation covers more area at 180.9 in (4,595 mm) long, and the second generation is shorter at 171.7 in (4,360 mm) but equally tall. Chrome or patterned film requires more material, about 77 ft (23.5 m) on the newest body and 74 ft (22.5 m) on the older one. The amount of labor also rises with the tall roof and the sliding door tracks that need careful trimming.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (76.6 in (1,945 mm)): the roof is wrapped from a platform.

Delta Wagon wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Delta Wagon, third generation, factory photo
Factory color shown

1996–2001 Delta Wagon van (third generation)

1996–2001van (5 doors)180.9 in (4,595 mm)

On the third generation Delta Wagon from 1996 to 2001, the sliding side door tracks stay bare and decide where the film is cut along the body. The tracks sit on the rear half of the van, so the film ends just beside them without covering their guide rails. Installers cut the vinyl in a straight line right at the edge of each track to keep the rollers working. That cut is part of the standard process for this van body.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (76.6 in (1,945 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Daihatsu Delta Wagon, second generation, factory photo
Factory color shown

1982–1996 Delta Wagon van (second generation)

1982–1996van (4 doors)171.7 in (4,360 mm)

On the second generation Delta Wagon from 1982 to 1996, paint age matters a lot because panels may be original or repainted after many years on the road. A test spot on each panel comes before a full wrap to check whether the clear coat or repaint will hold the film. This extra step can add time to the job and decides whether extra surface prep is needed. Making sure the paint is sound helps the film stick evenly across this older body.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (76.0 in (1,930 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Delta Wagon

A partial wrap on a Daihatsu Delta Wagon covers the roof, hood, and mirror caps as separate vinyl pieces. A chrome delete covers the window trim and badges with black film to change the bright parts of the van. Paint protection film (PPF) is clear film applied to the front end to guard the hood, bumper, and fenders from stone chips. These jobs use less material than a full wrap and still transform or protect the look of the van.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Delta Wagon: body, cut-outs and film

A Daihatsu Delta Wagon vinyl wrap must deal with a tall body that measures up to 76.6 in (1,945 mm) high and a length of 180.9 in (4,595 mm) on the third generation. The second generation is shorter at 171.7 in (4,360 mm) but still stands 76.0 in (1,930 mm) tall. Both body styles are five-door or four-door vans with large flat side panels. These dimensions call for a full 60-inch roll and careful planning around the roof and lower sills.

Delta Wagon wrap ideas have to account for sliding side doors whose tracks stay bare and define where the film is cut. The roof is wrapped from a platform because of the tall body, and the film is trimmed along the door tracks on both generations. The door handles, mirrors, and badges are removed or cut around with precision. Keeping the tracks clear is the key detail for a clean result on this van.

How much vinyl to wrap a Delta Wagon depends mainly on which generation is being covered. The third generation from 1996 to 2001 uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a full color change. The second generation from 1982 to 1996 needs roughly 64 ft (19.5 m) of the same width. Patterned or chrome film adds about 10 ft (3 m) to each estimate due to matching and waste.

Questions about wrapping a Daihatsu Delta Wagon

How much vinyl does it take to wrap a Daihatsu Delta Wagon?

A full wrap of the newest Daihatsu Delta Wagon body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. This figure is for the third generation from 1996 to 2001 with a standard color change wrap. The older second generation needs roughly 64 ft (19.5 m) of the same width. Patterned or chrome film adds about 10 ft (3 m) to the estimate.

Are the sliding doors of a Delta Wagon wrapped?

Yes, the sliding doors of a Delta Wagon are wrapped, but the door tracks stay bare and the film is cut along them. The vinyl is applied to the door panels right up to the edge of the track, but the guide channel itself is left unwrapped. That keeps the sliding mechanism working smoothly and gives a clean boundary line. Both generations have this same detail.

Can I wrap only the hood or the roof of a Delta Wagon?

Yes, you can wrap only the hood or the roof of a Delta Wagon. A partial wrap on this van includes the roof, hood, and mirror caps as separate pieces. A chrome delete can also be done on the window trim and badges without wrapping the whole body. For front-end protection, clear paint protection film (PPF) is applied to the hood, bumper, and fenders.

Is a Delta Wagon hard to wrap?

A Delta Wagon is not the easiest vehicle to wrap because of its tall body and sliding door tracks. The body height reaches 76.6 in (1,945 mm) on the third generation, so the roof is wrapped from a platform. The sliding door tracks stay bare and the film is cut along them, which needs careful knifeless tape work. The second generation adds older paint that may require a test spot and extra prep before wrapping.