Wraps by car

Daihatsu Fellow wrap

The Daihatsu Fellow wrap page covers the first and second generations of this classic mini. A full vinyl wrap of the newest body takes about 31 ft (9.5 m) of 60-inch (1.52 m) cast film. The first generation needs the same base amount but about 41 ft (12.5 m) if you choose chrome or patterned film.

2generations9.5 mof film for a full wrap

Daihatsu Fellow, second generation, factory photo
Daihatsu Fellow, second generation. Factory color shown.

Daihatsu Fellow wrap colors and ideas

  • Fellow black wrap
  • Fellow white wrap
  • Fellow gray wrap
  • Fellow silver wrap
  • Fellow red wrap
  • Fellow blue wrap
  • Fellow green wrap
  • Fellow yellow wrap
  • Fellow orange wrap
  • Fellow purple wrap
  • Fellow pink wrap
  • Fellow teal wrap
  • Fellow brown wrap
  • Fellow gold wrap
  • Fellow chrome wrap
  • Fellow color shift wrap
  • Fellow carbon fiber wrap
  • Fellow camo and patterned wrap

How much vinyl to wrap a Daihatsu Fellow

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1970–1976coupe, sedan (2 or 4 doors)117.9 in (2,995 mm)about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 36 ft (11 m)
1966–1970sedan (2 doors)117.7 in (2,990 mm)about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)

Fellow wrap cost factors

Fellow wrap cost is driven by the size of the car and the film you pick. A full wrap of this mini requires about 31 ft (9.5 m) of standard cast film, so material is a smaller part of the total than on a large SUV. The coupe body of the second generation needs slightly less film for the rear area than the sedan.

  • Film for a full wrap: about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 36 ft (11 m).
  • Body: coupe, sedan (2 or 4 doors).

Fellow wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Fellow, second generation, factory photo
Factory color shown

1970–1976 Fellow coupe, sedan (second generation)

1970–1976coupe, sedan (2 or 4 doors)117.9 in (2,995 mm)

The second generation of the Daihatsu Fellow came as a coupe or sedan with two or four doors. The body style decides the panel plan and the film amount, because a four-door car adds two short rear doors. A two-door coupe keeps the long side panels clean and uses less film around the door gaps.

Film: about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 36 ft (11 m).

Daihatsu Fellow, first generation, factory photo
Factory color shown

1966–1970 Fellow sedan (first generation)

1966–1970sedan (2 doors)117.7 in (2,990 mm)

The first generation of the Daihatsu Fellow is a two-door sedan from 1966 to 1970. Paint age matters on these cars, as panels may be original or repainted, and a test spot comes before a full wrap. Film does not bond well to flaking or chalky paint, so the surface must be checked and corrected first.

Two long side doors: each door is one large piece of film.

Film: about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Roof, hood, chrome delete and PPF on a Fellow

A partial wrap on a Daihatsu Fellow covers the roof, hood, or mirror caps. Fellow chrome delete targets the window trim and badges with black film. Paint protection film (PPF) can also be applied as a clear film on the front end, which is a good option for the upright nose of this mini.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Fellow: body, cut-outs and film

The Daihatsu Fellow vinyl wrap starts with a body under 118 in (3,000 mm) long. Both generations are two-door cars, so a full wrap has only two long side doors to cover. The coupe and sedan of the second generation share the same footprint but differ in the roof and rear window area.

Fellow wrap ideas begin with the two long side doors, each of which takes one large piece of film. The small size of the coupe and sedan means fewer seams are needed on flat panels. Badges and door handles come off before the film goes on, and the window trim can be covered for a chrome delete.

How much vinyl to wrap a Fellow depends on the generation you own. The first generation needs about 41 ft (12.5 m) for chrome or patterned film, while the second needs about 36 ft (11 m) for the same options. The difference comes from the earlier car's smaller glass area and more exposed trim.

Questions about wrapping a Daihatsu Fellow

How much vinyl does it take to wrap a Daihatsu Fellow?

About 31 ft (9.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Daihatsu Fellow. This figure applies to the newest body, the second generation. The first generation needs the same base amount, but chrome or patterned film pushes it to about 41 ft (12.5 m).

Which Fellow body takes more film?

The first generation Fellow body takes more film with chrome or patterned options. It needs about 41 ft (12.5 m), while the second generation needs about 36 ft (11 m) for the same patterns. The earlier sedan has more exposed trim around the glass and body, which adds to the material.

Can I wrap only the hood or the roof of a Fellow?

Yes, you can wrap only the hood or the roof of a Fellow. Partial wrap jobs on this car include the roof, hood, and mirror caps. These smaller areas are a good way to change the look without a full vinyl wrap.

Is a Fellow hard to wrap?

A Fellow is not especially hard to wrap, but its two long side doors require careful handling. Each door is one large piece of film, so you need space to apply it without creasing. The small size of the car also means fewer seams, but tight curves at the front and rear demand heat and patience.