Wraps by car

Daihatsu Midget wrap

A Daihatsu Midget wrap covers the second-generation minivan built from 1996 to 2001. The catalog includes one generation of this small van. A full vinyl wrap of the newest Midget body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

1generations12.5 mof film for a full wrap

Daihatsu Midget, second generation, factory photo
Daihatsu Midget, second generation. Factory color shown.

Daihatsu Midget wrap colors and ideas

  • Midget black wrap
  • Midget white wrap
  • Midget gray wrap
  • Midget silver wrap
  • Midget red wrap
  • Midget blue wrap
  • Midget green wrap
  • Midget yellow wrap
  • Midget orange wrap
  • Midget purple wrap
  • Midget pink wrap
  • Midget teal wrap
  • Midget brown wrap
  • Midget gold wrap
  • Midget chrome wrap
  • Midget color shift wrap
  • Midget carbon fiber wrap
  • Midget camo and patterned wrap

How much vinyl to wrap a Daihatsu Midget

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2001van (2 doors)114.0 in (2,895 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Midget wrap cost factors

The Midget wrap cost depends on the small size of the van and the film you choose. A full wrap of the 114.0 in (2,895 mm) body uses about 41 ft (12.5 m) of cast film. Chrome or patterned film needs about 49 ft (15 m), and the sliding door tracks add trimming time.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: van (2 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Two long side doors: each door is one large piece of film.

Midget wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Midget, second generation, factory photo
Factory color shown

1996–2001 Midget van (second generation)

1996–2001van (2 doors)114.0 in (2,895 mm)

The second-generation Daihatsu Midget is a two-door van with one sliding side door on each side. The door tracks stay bare and decide where the film is cut. Each side door is one large piece of film. The van is 114.0 in (2,895 mm) long and wraps with about 41 ft (12.5 m) of cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Midget

A partial wrap on a Daihatsu Midget can cover the roof, the hood or the mirror caps. A Midget chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end guards the leading edge of the van.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Midget: body, cut-outs and film

The Daihatsu Midget vinyl wrap follows the simple two-door van shape with one long sliding door on each side. The body is 114.0 in (2,895 mm) long, so the van uses less film than a standard minivan. A full wrap covers the roof, the rear panel and both sides in large pieces.

Midget wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. Each long side door is one large piece of film, so a two-tone design can follow the door line. Badges and window trim come off for a clean edge and a neat chrome delete.

How much vinyl to wrap a Midget depends on the generation, but only one generation is in this catalog. The second-generation van is 114.0 in (2,895 mm) long and needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 8 ft (2.5 m).

Questions about wrapping a Daihatsu Midget

How much vinyl does it take to wrap a Daihatsu Midget?

A Daihatsu Midget takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full wrap. This figure is for the newest body, the second-generation van from 1996 to 2001. The film estimate allows for the two long side doors and the sliding door tracks.

Are the sliding doors of a Midget wrapped?

Yes, the sliding doors of a Midget are wrapped. The door tracks stay bare, so the film is cut along them. Each sliding door is one large piece of film.

Can I wrap only the hood or the roof of a Midget?

Yes, you can wrap only the hood or the roof of a Midget. A partial wrap on this van covers the roof, the hood or the mirror caps. These small pieces are a good way to change one part of the van.

Is a Midget hard to wrap?

A Midget is not hard to wrap because the body has two long side doors that take one piece of film each. The sliding door tracks stay bare and the film is cut along them, which adds some trimming work. The van is 114.0 in (2,895 mm) long, so a full wrap uses about 41 ft (12.5 m) of cast film.