Wraps by car

Daihatsu Mira Gino wrap

The Daihatsu Mira Gino wrap page covers both generations of this mini hatchback. The first generation was built from 1998 to 2004 and the second from 2004 to 2008. A full wrap of the newest body uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

2generations13.5 mof film for a full wrap

Daihatsu Mira Gino, second generation, factory photo
Daihatsu Mira Gino, second generation. Factory color shown.

Daihatsu Mira Gino wrap colors and ideas

  • Mira Gino black wrap
  • Mira Gino white wrap
  • Mira Gino gray wrap
  • Mira Gino silver wrap
  • Mira Gino red wrap
  • Mira Gino blue wrap
  • Mira Gino green wrap
  • Mira Gino yellow wrap
  • Mira Gino orange wrap
  • Mira Gino purple wrap
  • Mira Gino pink wrap
  • Mira Gino teal wrap
  • Mira Gino brown wrap
  • Mira Gino gold wrap
  • Mira Gino chrome wrap
  • Mira Gino color shift wrap
  • Mira Gino carbon fiber wrap
  • Mira Gino camo and patterned wrap

How much vinyl to wrap a Daihatsu Mira Gino

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2008hatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1998–2004hatchback (3 or 5 doors)133.7 in (3,395 mm) to 134.4 in (3,415 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Mira Gino wrap cost factors

A Mira Gino wrap cost depends on the film type, the number of panels, and the condition of the paint. The car is a mini, so its painted area is small, but the tailgate glass edge adds a careful cut. The first generation is slightly shorter than the second, but the difference is minor.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mira Gino wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Mira Gino, second generation, factory photo
Factory color shown

2004–2008 Mira Gino hatchback (second generation)

2004–2008hatchback (5 doors)133.7 in (3,395 mm)

The second generation Daihatsu Mira Gino was produced from 2004 to 2008 as a five-door hatchback. It is 133.7 in (3,395 mm) long and uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Paint age matters on a car of these years because panels may be original or repainted. A test spot on the paint is the way to check adhesion before a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Daihatsu Mira Gino, first generation, factory photo
Factory color shown

1998–2004 Mira Gino hatchback (first generation)

1998–2004hatchback (3 or 5 doors)133.7 in (3,395 mm) to 134.4 in (3,415 mm)

The first generation Daihatsu Mira Gino was built from 1998 to 2004 as a three- or five-door hatchback. Its length ranges from 133.7 in (3,395 mm) to 134.4 in (3,415 mm), and a full wrap takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. The body style has separate panels for each door and the tailgate, so the installer cuts film for each panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Mira Gino

A partial wrap on the Mira Gino can cover the roof, the hood, or the mirror caps. A Mira Gino chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) on the front end is a clear option that leaves the color unchanged.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Mira Gino: body, cut-outs and film

A Daihatsu Mira Gino vinyl wrap starts from a hatchback body with three or five doors. The car is 133.7 in (3,395 mm) long on the second generation and up to 134.4 in (3,415 mm) on the first. That compact size keeps the painted area small, so the film estimate is lower than on a larger car.

The Mira Gino wrap ideas must include the tailgate with the rear glass in it. The film ends at the edge of the glass, so the installer trims carefully around that opening. No other large cut-out is needed on this body.

To figure how much vinyl to wrap a Mira Gino, compare the two generations. The first generation needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film and the second about 44 ft (13.5 m). A chrome or patterned film adds a few feet on either generation.

Questions about wrapping a Daihatsu Mira Gino

How much vinyl does it take to wrap a Daihatsu Mira Gino?

A Daihatsu Mira Gino needs about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. That estimate is for a solid-color cast film. A chrome or patterned film needs about 52 ft (16 m) because the pattern must be matched.

Can I wrap only the hood or the roof of a Mira Gino?

Yes, you can wrap only the hood or the roof of a Mira Gino. A partial wrap can also cover the mirror caps. These jobs use far less film than a full wrap.

Is a Mira Gino hard to wrap?

A Mira Gino is not hard to wrap, but the tailgate with the rear glass in it adds one careful step. The film ends at the edge of the glass, so the installer trims that line precisely. The compact size makes the job simpler than on a large vehicle.

How many generations of the Mira Gino does this page cover?

This page covers two generations of the Daihatsu Mira Gino. The first generation was produced from 1998 to 2004 and the second from 2004 to 2008.