Wraps by car

Daihatsu Opti wrap

The Daihatsu Opti wrap page covers two generations of this mini car. A full vinyl wrap of the second generation sedan uses about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The first generation hatchback needs the same amount of film.

2generations11.5 mof film for a full wrap

Daihatsu Opti, second generation, factory photo
Daihatsu Opti, second generation. Factory color shown.

Daihatsu Opti wrap colors and ideas

  • Opti black wrap
  • Opti white wrap
  • Opti gray wrap
  • Opti silver wrap
  • Opti red wrap
  • Opti blue wrap
  • Opti green wrap
  • Opti yellow wrap
  • Opti orange wrap
  • Opti purple wrap
  • Opti pink wrap
  • Opti teal wrap
  • Opti brown wrap
  • Opti gold wrap
  • Opti chrome wrap
  • Opti color shift wrap
  • Opti carbon fiber wrap
  • Opti camo and patterned wrap

How much vinyl to wrap a Daihatsu Opti

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2002sedan (4 doors)133.7 in (3,395 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)
1992–1998hatchback (3 or 5 doors)129.7 in (3,295 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Opti wrap cost factors

Opti wrap cost depends on the film type, the number of panels, and the condition of the paint. The second generation sedan has four doors and a trunk, while the first generation hatchback has three or five doors. Chrome or patterned film needs about 48 ft (14.5 m), which is more material than a solid color.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: sedan (4 doors).

Opti wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Opti, second generation, factory photo
Factory color shown

1998–2002 Opti sedan (second generation)

1998–2002sedan (4 doors)133.7 in (3,395 mm)

The second generation Daihatsu Opti was built from 1998 to 2002 as a four-door sedan. Paint age on a car of these years varies, so panels may be original or repainted. A test spot comes before a full wrap to check adhesion on older paint.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Daihatsu Opti, first generation, factory photo
Factory color shown

1992–1998 Opti hatchback (first generation)

1992–1998hatchback (3 or 5 doors)129.7 in (3,295 mm)

The first generation Daihatsu Opti was built from 1992 to 1998 as a hatchback with three or five doors. Its length of 129.7 in (3,295 mm) makes each panel small. The hatchback body has more separate edges, so the same film length is cut into more pieces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on an Opti

A partial wrap on an Opti can cover the roof, hood, or mirror caps. Opti chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear wrap on the front end to guard the bumper and hood.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Opti: body, cut-outs and film

A Daihatsu Opti vinyl wrap is a small job because the car measures 133.7 in (3,395 mm) in the second generation. The first generation is 129.7 in (3,295 mm) long with a three- or five-door hatchback body. Fewer panels and a small roof mean less film waste than on a larger sedan.

Opti wrap ideas start with the door handles, mirrors, and badges, which are removed for a clean finish. The first generation has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The second generation sedan has a normal trunk lid with an edge to wrap.

How much vinyl to wrap an Opti stays the same across generations at about 38 ft (11.5 m). Chrome or patterned film requires about 48 ft (14.5 m) because the pattern repeat adds waste. A first generation hatchback has more separate panels, so a shop will spend more time on cuts.

Questions about wrapping a Daihatsu Opti

How much vinyl does it take to wrap a Daihatsu Opti?

A Daihatsu Opti needs about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film takes about 48 ft (14.5 m) because of the pattern repeat.

Can I wrap only the hood or the roof of an Opti?

Yes, you can wrap only the hood or the roof of an Opti. A shop will install a partial wrap on the roof, hood, or mirror caps without wrapping the whole car.

Is an Opti hard to wrap?

An Opti is not hard to wrap, but the first generation hatchback has a tailgate with the rear glass in it. The film must end at the edge of the glass, which adds a precise cut. Its small size of 129.7 in (3,295 mm) also means more edges per panel.

How many generations of the Opti does this page cover?

This page covers two generations of the Daihatsu Opti. The first generation was built from 1992 to 1998, and the second from 1998 to 2002.