Wraps by car

Daihatsu Pyzar wrap

The Daihatsu Pyzar wrap page covers the first-generation Pyzar built from 1996 to 2002 in one minivan body style. A full vinyl wrap of this car takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 69 ft (21 m). The Pyzar is a small five-door van sold mainly in Japan and some export markets.

1generations17.5 mof film for a full wrap

Daihatsu Pyzar, first generation, factory photo
Daihatsu Pyzar, first generation. Factory color shown.

Daihatsu Pyzar wrap colors and ideas

  • Pyzar black wrap
  • Pyzar white wrap
  • Pyzar gray wrap
  • Pyzar silver wrap
  • Pyzar red wrap
  • Pyzar blue wrap
  • Pyzar green wrap
  • Pyzar yellow wrap
  • Pyzar orange wrap
  • Pyzar purple wrap
  • Pyzar pink wrap
  • Pyzar teal wrap
  • Pyzar brown wrap
  • Pyzar gold wrap
  • Pyzar chrome wrap
  • Pyzar color shift wrap
  • Pyzar carbon fiber wrap
  • Pyzar camo and patterned wrap

How much vinyl to wrap a Daihatsu Pyzar

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2002van (5 doors)159.4 in (4,050 mm) to 160.6 in (4,080 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Pyzar wrap cost factors

Pyzar wrap cost is driven by the amount of film, the film type, and the labor for the sliding door areas. The car needs about 57 ft (17.5 m) of cast film for a full color change, more if chrome or patterned film is used. Removing the mirrors, handles, and badges, plus cutting around the door tracks, adds time to the job.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 1998: bumpers and lights differ between the versions, and so do the film cuts.

Pyzar wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Pyzar, first generation, factory photo
Factory color shown

1996–2002 Pyzar van (first generation)

1996–2002van (5 doors)159.4 in (4,050 mm) to 160.6 in (4,080 mm)

The first-generation Pyzar from 1996 to 2002 is a five-door van with sliding side doors on both sides. The door tracks stay bare when the car is wrapped, and the film is cut along them. The body was restyled in 1998, which changed the front and rear bumpers and slightly altered the overall length.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Pyzar

A partial wrap on a Pyzar can cover the roof, the hood, or the mirror caps. A chrome delete turns the window trim and badges black instead of bright. Clear paint protection film (PPF) on the front end protects the hood and bumper from stone chips without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Pyzar: body, cut-outs and film

The Daihatsu Pyzar vinyl wrap has to follow the boxy five-door van shape that measures 159.4 in (4,050 mm) to 160.6 in (4,080 mm) long. The tall roof and flat sides make the film easier to lay in large panels than on a curved coupe. The five doors include a rear tailgate and two sliding side doors that affect how the film is planned on each side.

Pyzar wrap ideas start with the sliding side doors because their tracks must stay bare, and the film is cut along them. The door handles, mirrors, and badges should be removed or carefully cut around for a clean finish. The rear wiper and the antenna base also need cut-outs, and the windshield washer nozzles can be released before wrapping the hood.

How much vinyl to wrap a Pyzar depends on the body length, which changed slightly in 1998 when the car was restyled. The earlier cars from 1996 to 1998 are at the shorter end, and the later cars from 1998 to 2002 are at the longer end of the range. A wrap installer counts both sides, the roof, the hood, and the tailgate when measuring film for this generation.

Questions about wrapping a Daihatsu Pyzar

How much vinyl does it take to wrap a Daihatsu Pyzar?

Yes, a full wrap of a Daihatsu Pyzar takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 69 ft (21 m). This figure covers the entire body of the five-door van.

Are the sliding doors of a Pyzar wrapped?

Yes, the sliding doors of a Pyzar are wrapped, but the tracks stay bare. The film is cut along the door tracks so the doors can still slide freely. This is a normal part of wrapping any van with sliding side doors.

Which years of the Pyzar take the same film cuts?

All Pyzar years from 1996 to 2002 take the same film cuts for the basic body panels. The car was restyled in 1998, so bumper and light shapes differ between early and late cars. An installer uses the same main panels but adjusts the bumper templates for the year.

Can I wrap only the hood or the roof of a Pyzar?

Yes, you can wrap only the hood or the roof of a Pyzar as a partial wrap. Mirror caps are another small job that changes the look without wrapping the whole van. This is a good way to add contrast or protect a single panel.