Wraps by car

Daihatsu Rugger wrap

The Daihatsu Rugger wrap page covers two generations of this boxy SUV and the vinyl wrap film each body takes. The newest body, from 1993 to 2002, needs about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film on that body takes about 70 ft (21.5 m).

2generations17 mof film for a full wrap

Daihatsu Rugger, second generation, factory photo
Daihatsu Rugger, second generation. Factory color shown.

Daihatsu Rugger wrap colors and ideas

  • Rugger black wrap
  • Rugger white wrap
  • Rugger gray wrap
  • Rugger silver wrap
  • Rugger red wrap
  • Rugger blue wrap
  • Rugger green wrap
  • Rugger yellow wrap
  • Rugger orange wrap
  • Rugger purple wrap
  • Rugger pink wrap
  • Rugger teal wrap
  • Rugger brown wrap
  • Rugger gold wrap
  • Rugger chrome wrap
  • Rugger color shift wrap
  • Rugger carbon fiber wrap
  • Rugger camo and patterned wrap

How much vinyl to wrap a Daihatsu Rugger

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2002SUV (3 doors)161.2 in (4,095 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1987–1995SUV (3 doors)148.1 in (3,761 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Rugger wrap cost factors

Rugger wrap cost depends on the size of the body, the film chosen, and the labor for the tall roof and long doors. The first generation is 148.1 in (3,761 mm) long, and the second generation is 161.2 in (4,095 mm) long. The roof work on both generations calls for a platform, which adds time. The condition of the paint also affects preparation work.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

Rugger wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Rugger, second generation, factory photo
Factory color shown

1993–2002 Rugger SUV (second generation)

1993–2002SUV (3 doors)161.2 in (4,095 mm)

The height of the body is the main point about the second generation Rugger, from 1993 to 2002. The body stands 72.4 in (1,840 mm) tall, so the roof is wrapped from a platform. This extra step takes more time than wrapping a lower vehicle. The long side doors are still one large piece each.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Daihatsu Rugger, first generation, factory photo
Factory color shown

1987–1995 Rugger SUV (first generation)

1987–1995SUV (3 doors)148.1 in (3,761 mm)

Paint age is the main point about the first generation Rugger, from 1987 to 1995. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. A test spot checks how the film adheres to the old paint. This step prevents lifting later on.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Rugger

Rugger chrome delete is a smaller job that covers the window trim and badges with black film. A partial wrap can cover the roof, hood, or mirror caps instead of the whole body. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Rugger: body, cut-outs and film

A Daihatsu Rugger vinyl wrap is shaped by the SUV's three-door body and short overall length. The second generation is 161.2 in (4,095 mm) long, and the first generation is 148.1 in (3,761 mm) long. Both have two long side doors, so each door panel is one large piece of film. The tall roof must be wrapped from a platform.

Rugger wrap ideas start with the tailgate, because the rear glass sits inside it and the film ends at the glass edge. The two long side doors are wrapped as one large piece each, without a cut line in the middle. The roof is tall and is best reached from a platform. Door handles and badges are removed for a clean install.

How much vinyl to wrap a Rugger changes between the two generations. The first generation, from 1987 to 1995, takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The second generation, from 1993 to 2002, takes about 56 ft (17 m) of the same width. A chrome or patterned film adds roughly 12 ft (3.5 m) to each estimate.

Questions about wrapping a Daihatsu Rugger

How much vinyl does it take to wrap a Daihatsu Rugger?

A Daihatsu Rugger from 1993 to 2002 takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. The first generation from 1987 to 1995 takes about 52 ft (16 m) of the same width. Chrome or patterned film adds about 12 ft (3.5 m) to each figure.

Can I wrap only the hood or the roof of a Rugger?

Yes, you can wrap only the hood or the roof of a Rugger as a partial wrap. The partial wrap job also includes the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film is applied as a clear film on the front end.

Is a Rugger hard to wrap?

A Rugger is hard to wrap in some areas, but the panels are large and straightforward. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The two long side doors are each one large piece of film. The tall body means the roof is wrapped from a platform, which adds work.

How many generations of the Rugger does this page cover?

This page covers two generations of the Daihatsu Rugger. The first generation is from 1987 to 1995, and the second generation is from 1993 to 2002. Each generation has a different body length and film estimate.