Wraps by car

Daihatsu Sonica wrap

The Daihatsu Sonica wrap page covers the mini hatchback from 2006–2009, its single generation, and the vinyl wrap needed for a full color change. A complete wrap of this body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, or about 52 ft (16 m) of chrome or patterned film.

1generations13.5 mof film for a full wrap

Daihatsu Sonica, first generation, factory photo
Daihatsu Sonica, first generation. Factory color shown.

Daihatsu Sonica wrap colors and ideas

  • Sonica black wrap
  • Sonica white wrap
  • Sonica gray wrap
  • Sonica silver wrap
  • Sonica red wrap
  • Sonica blue wrap
  • Sonica green wrap
  • Sonica yellow wrap
  • Sonica orange wrap
  • Sonica purple wrap
  • Sonica pink wrap
  • Sonica teal wrap
  • Sonica brown wrap
  • Sonica gold wrap
  • Sonica chrome wrap
  • Sonica color shift wrap
  • Sonica carbon fiber wrap
  • Sonica camo and patterned wrap

How much vinyl to wrap a Daihatsu Sonica

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2009hatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Sonica wrap cost factors

The Sonica wrap cost depends on the film type, coverage area, and the condition of the 2006–2009 paintwork. A full wrap uses about 44 ft (13.5 m) of cast film, and the small size of the car keeps material waste low compared with larger vehicles.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Sonica wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Sonica, first generation, factory photo
Factory color shown

2006–2009 Sonica hatchback (first generation)

2006–2009hatchback (5 doors)133.7 in (3,395 mm)

The first generation Daihatsu Sonica was built from 2006 to 2009 as a 5-door hatchback. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap to check paint adhesion.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Sonica

A partial wrap on the Daihatsu Sonica can cover the roof, hood, or mirror caps, while a chrome delete (bright trim covered with black film) suits the window trim and badges. Paint protection film (PPF) is also an option with clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Sonica: body, cut-outs and film

The Daihatsu Sonica vinyl wrap is sized around a small 5-door hatchback with a length of 133.7 in (3,395 mm). Its compact panels mean a full wrap uses less film than many larger cars, but the tall tailgate and curved rear corners require careful stretching.

Sonica wrap ideas often start with the tailgate, since the rear glass is set into it and the film must end at the edge of the glass. Installers also remove the door handles and mirror caps to tuck the film for a clean finish.

How much vinyl to wrap a Sonica stays the same across its one generation because only one body style was offered. A full wrap uses about 44 ft (13.5 m) of standard cast film, while chrome or patterned film needs about 52 ft (16 m) due to extra waste from matching patterns.

Questions about wrapping a Daihatsu Sonica

How much vinyl does it take to wrap a Daihatsu Sonica?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast vinyl to wrap a Daihatsu Sonica. If you choose chrome or patterned film, plan for about 52 ft (16 m).

Can I wrap only the hood or the roof of a Sonica?

Yes, you can wrap only the hood or the roof of a Sonica. These partial wrap jobs are smaller than a full color change wrap and still protect the paint on those panels.

Is a Sonica hard to wrap?

A Sonica is not hard to wrap, but the tailgate with the rear glass in it adds work because the film must end at the edge of the glass. The car's small size and simple curves make most panels straightforward.

How many generations of the Sonica does this page cover?

This page covers one generation of the Daihatsu Sonica. The single generation was produced from 2006 to 2009 as a 5-door hatchback.