Wraps by car

Daihatsu Taft wrap

The Daihatsu Taft wrap page covers the first-generation SUV produced from 1974 to 1984. A full vinyl wrap of this classic body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. The catalog lists one generation with its key dimensions and wrap details.

1generations14 mof film for a full wrap

Daihatsu Taft, first generation, factory photo
Daihatsu Taft, first generation. Factory color shown.

Daihatsu Taft wrap colors and ideas

  • Taft black wrap
  • Taft white wrap
  • Taft gray wrap
  • Taft silver wrap
  • Taft red wrap
  • Taft blue wrap
  • Taft green wrap
  • Taft yellow wrap
  • Taft orange wrap
  • Taft purple wrap
  • Taft pink wrap
  • Taft teal wrap
  • Taft brown wrap
  • Taft gold wrap
  • Taft chrome wrap
  • Taft color shift wrap
  • Taft carbon fiber wrap
  • Taft camo and patterned wrap

How much vinyl to wrap a Daihatsu Taft

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1984SUV (3 doors)132.7 in (3,370 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Taft wrap cost factors

Taft wrap cost depends on the film area, the height of the body, and the number of cut-outs. A full wrap needs about 46 ft (14 m) of film, but chrome or patterned vinyl raises that to about 56 ft (17 m). The 72.0 in (1,830 mm) tall roof needs a platform, which adds labor time. The tailgate glass and door handles require careful trimming, so the installer's time is a major factor.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Taft wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Taft, first generation, factory photo
Factory color shown

1974–1984 Taft SUV (first generation)

1974–1984SUV (3 doors)132.7 in (3,370 mm)

The first-generation Taft has a body height of 72.0 in (1,830 mm). The roof is wrapped from a platform, which takes more time than a lower roof. This generation is the only one in the catalog, produced from 1974 to 1984. The tall, boxy shape is distinctive but adds labor to a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Taft

A partial wrap on a Taft can cover the roof, hood, and mirror caps. Taft chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These smaller jobs use less material and focus on the most visible or vulnerable areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daihatsu Taft: body, cut-outs and film

A Daihatsu Taft vinyl wrap has to handle a very short body and a tall roof. The SUV measures 132.7 in (3,370 mm) long and 72.0 in (1,830 mm) high. That height means the roof is wrapped from a platform, which adds labor but not film. The three-door body keeps panel sizes manageable for a clean install.

Taft wrap ideas should plan for the tailgate and the long side doors. The tailgate holds the rear glass, so the film ends neatly at the edge of the glass. Each two long side doors is one large piece of film, which simplifies seams. The tall body also means the roof needs a stable platform for safe work.

If you are counting how much vinyl to wrap a Taft, use the numbers for the 1974–1984 body. A full color change wrap needs about 46 ft (14 m) of 60-inch (1.52 m) cast film. A chrome or patterned film job takes about 56 ft (17 m) of the same width. The short length keeps the total film needs low for an SUV.

Questions about wrapping a Daihatsu Taft

How much vinyl does it take to wrap a Daihatsu Taft?

A full wrap of a Daihatsu Taft takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the estimate rises to about 56 ft (17 m). The numbers are for the 1974–1984 three-door SUV body.

Can I wrap only the hood or the roof of a Taft?

Yes, you can wrap only the hood or the roof of a Taft. The partial wrap options for this car include the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges. Paint protection film is another partial option for the front end.

Is a Taft hard to wrap?

The Taft adds work because of its tall body and a few specific parts. The roof sits 72.0 in (1,830 mm) high, so the installer wraps it from a platform. The tailgate has the rear glass in it, so the film must end at the edge of the glass. The long side doors are each one large piece, but they need careful handling.

How many generations of the Taft does this page cover?

This page covers one generation of the Taft. The first generation was produced from 1974 to 1984. That is the only body style in the catalog.