Wraps by car

Fiat 124 Spider wrap

The Fiat 124 Spider wrap covers the full body of this two-door convertible sports car. It has one generation in this catalog, produced from 2016 to 2020. A full wrap of the newest body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. A color change with chrome or patterned film takes about 49 ft (15 m).

1generations11.5 mof film for a full wrap

Fiat 124 Spider, first generation, factory photo
Fiat 124 Spider, first generation. Factory color shown.

Fiat 124 Spider wrap colors and ideas

  • Fiat 124 Spider black wrap
  • Fiat 124 Spider white wrap
  • Fiat 124 Spider gray wrap
  • Fiat 124 Spider silver wrap
  • Fiat 124 Spider red wrap
  • Fiat 124 Spider blue wrap
  • Fiat 124 Spider green wrap
  • Fiat 124 Spider yellow wrap
  • Fiat 124 Spider orange wrap
  • Fiat 124 Spider purple wrap
  • Fiat 124 Spider pink wrap
  • Fiat 124 Spider teal wrap
  • Fiat 124 Spider brown wrap
  • Fiat 124 Spider gold wrap
  • Fiat 124 Spider chrome wrap
  • Fiat 124 Spider color shift wrap
  • Fiat 124 Spider carbon fiber wrap
  • Fiat 124 Spider camo and patterned wrap

How much vinyl to wrap a Fiat 124 Spider

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2020convertible (2 doors)159.6 in (4,054 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Fiat 124 Spider wrap cost factors

Fiat 124 Spider wrap cost depends on the film area, the film type, and the body details of this car. A full wrap uses about 38 ft (11.5 m) of 60-inch (1.52 m) cast film, or about 49 ft (15 m) with chrome or patterned film. The convertible top and the small size reduce the wrap area. A wrap with many cut-outs or removed parts takes more labor.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Fiat 124 Spider wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 124 Spider, first generation, factory photo
Factory color shown

2016–2020 Fiat 124 Spider convertible (first generation)

2016–2020convertible (2 doors)159.6 in (4,054 mm)

The open top of the Fiat 124 Spider is not wrapped, and the film ends where the top begins. The fabric top stays uncovered, while the body panels around it get the vinyl. If the car had a folding hard top, those panels would be wrapped as their own pieces. The edge of the film follows the line where the top meets the body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Fiat 124 Spider

Partial wrap on a Fiat 124 Spider can cover the hood, mirror caps, or rear deck. Chrome delete is a common job for the window trim and badges, covering bright parts with black film. Paint protection film (PPF) is clear film applied to the front end to protect from stone chips. These smaller jobs use less film than a full wrap and focus on the areas you want to change or protect.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Fiat 124 Spider: body, cut-outs and film

A Fiat 124 Spider vinyl wrap has to work around a 159.6 in (4,054 mm) long convertible body. The two-door convertible shape means the fabric top is not wrapped, so the film ends where the top begins. The hood, doors, fenders, and rear deck are the main wrap areas. The smaller size of this sports car keeps the wrap area tighter than on a sedan.

Fiat 124 Spider wrap ideas often start with which parts need cut-outs or come off. Door handles, mirrors, lights, and badges require careful trimming or removal. The bumper and rocker panels need relief cuts to follow their curves. Plan these details before you start cutting the film.

How much vinyl to wrap a Fiat 124 Spider depends on whether you count one generation or more. This catalog has one generation, from 2016 to 2020, so the body dimensions stay the same across those years. A full wrap of that single body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Add extra film for the door jambs or if you wrap inside the trunk edges.

Questions about wrapping a Fiat 124 Spider

How much vinyl does it take to wrap a Fiat 124 Spider?

A Fiat 124 Spider takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, plan for about 49 ft (15 m). These figures are for the single generation of this car, produced from 2016 to 2020.

Is the top of a Fiat 124 Spider wrapped?

No, the top of a Fiat 124 Spider is not wrapped. The convertible top is fabric, and the film ends where the top begins. Only the body panels around the top receive vinyl.

Can I wrap only the hood or the roof of a Fiat 124 Spider?

Yes, you can wrap only the hood or the roof of a Fiat 124 Spider. The roof in this case means the rear deck area, since the top is not wrapped. Partial wrap jobs like the hood, mirror caps, and rear deck are smaller and use less film than a full wrap.

Is a Fiat 124 Spider hard to wrap?

A Fiat 124 Spider is not the hardest car to wrap, but the convertible body adds some work. The film ends where the fabric top begins, so you must cut and finish that edge cleanly. The car is 159.6 in (4,054 mm) long, which is a compact size for a sports car. Door handles, mirrors, and badges need cut-outs or removal as on any car.