Wraps by car

Fiat Cinquecento wrap

A Fiat Cinquecento wrap is a color change or protection project for an Italian mini car produced in two generations. The catalog covers the second generation built from 2007 to 2015 and the first generation built from 1991 to 1998. A full vinyl wrap on the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 54 ft (16.5 m).

2generations14 mof film for a full wrap

Fiat Cinquecento, second generation, factory photo
Fiat Cinquecento, second generation. Factory color shown.

Fiat Cinquecento wrap colors and ideas

  • Cinquecento black wrap
  • Cinquecento white wrap
  • Cinquecento gray wrap
  • Cinquecento silver wrap
  • Cinquecento red wrap
  • Cinquecento blue wrap
  • Cinquecento green wrap
  • Cinquecento yellow wrap
  • Cinquecento orange wrap
  • Cinquecento purple wrap
  • Cinquecento pink wrap
  • Cinquecento teal wrap
  • Cinquecento brown wrap
  • Cinquecento gold wrap
  • Cinquecento chrome wrap
  • Cinquecento color shift wrap
  • Cinquecento carbon fiber wrap
  • Cinquecento camo and patterned wrap

How much vinyl to wrap a Fiat Cinquecento

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2015hatchback (2 doors)139.6 in (3,546 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1991–1998hatchback (3 doors)127.0 in (3,227 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Cinquecento wrap cost factors

Cinquecento wrap cost is shaped by the generation, the film type, and the condition of the paint. The second generation has a larger body than the first, so it needs more film material. A full wrap on the second generation uses about 46 ft (14 m) of cast film while the first generation uses about 38 ft (11.5 m). Surface preparation adds work when panels are repainted or rough, and chrome or patterned film raises material use.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (2 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Cinquecento wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Cinquecento, second generation, factory photo
Factory color shown

2007–2015 Cinquecento hatchback (second generation)

2007–2015hatchback (2 doors)139.6 in (3,546 mm)

The second generation Fiat Cinquecento was built from 2007 to 2015 as a two-door hatchback. With a length of 139.6 in (3,546 mm), it is a compact body with simple panels. Paint age on a car of these years can vary from original to repainted, and a test spot comes before a full wrap. A test spot checks adhesion on each panel and shows whether more surface work is needed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Fiat Cinquecento, first generation, factory photo
Factory color shown

1991–1998 Cinquecento hatchback (first generation)

1991–1998hatchback (3 doors)127.0 in (3,227 mm)

The first generation Fiat Cinquecento was built from 1991 to 1998 as a three-door hatchback. Its length of 127.0 in (3,227 mm) makes it one of the smallest bodies a wrap installer will handle. The small size and the three-door layout mean fewer panels and less film than on the second generation. A full wrap uses about 38 ft (11.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Cinquecento

Partial wrap jobs on a Fiat Cinquecento can cover the roof, the hood, or the mirror caps. A Cinquecento chrome delete covers the window trim and badges with black film for a monotone look. Paint protection film (PPF) is a clear film installed on the front end of the car. These smaller jobs fit within the same short body and use far less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Fiat Cinquecento: body, cut-outs and film

A Fiat Cinquecento vinyl wrap covers a short two-door hatchback body with only two large side doors. The second generation is 139.6 in (3,546 mm) long and the first generation is 127.0 in (3,227 mm) long. These compact dimensions keep panel sizes small and the total film amount low. Each side door is one large piece of film, which simplifies layout and reduces seams.

Cinquecento wrap ideas should account for a tailgate that holds the rear glass inside it. The film ends at the edge of the glass, so a clean line is easy to set at the rear. The two long side doors are each wrapped as one large piece of film. Removing door handles and side mirrors before wrapping gives a cleaner edge around those parts.

How much vinyl to wrap a Cinquecento depends on the generation and the film type. The second generation from 2007 to 2015 needs about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. The first generation from 1991 to 1998 is shorter and needs about 38 ft (11.5 m) of the same film. Chrome or patterned film requires more material because the pattern or finish direction must be matched from panel to panel.

Questions about wrapping a Fiat Cinquecento

How much vinyl does it take to wrap a Fiat Cinquecento?

About 46 ft (14 m) of 60-inch (1.52 m) cast film is the full wrap amount for the newest Fiat Cinquecento body from 2007 to 2015. That figure covers the whole exterior, including the roof and the tailgate. The first generation from 1991 to 1998 needs less film because the body is shorter.

Can I wrap only the hood or the roof of a Cinquecento?

Yes, a partial wrap can cover only the hood or the roof of a Cinquecento. These areas are flat and small, so they use a fraction of the full wrap film. Mirror caps and a chrome delete on the window trim are other small jobs on this car.

Is a Cinquecento hard to wrap?

A Cinquecento is moderately easy to wrap because it is very short and has mostly flat panels. The tailgate holds the rear glass inside it, so the film must be trimmed cleanly at the edge of the glass. The two long side doors are one large piece each, which takes careful handling to avoid wrinkles but avoids seams.

How many generations of the Cinquecento does this page cover?

This page covers two generations of the Fiat Cinquecento. They are the second generation from 2007 to 2015 and the first generation from 1991 to 1998. Each generation has its own body length and film amount listed above.