Wraps by car

Fiat 500L wrap

The Fiat 500L wrap page covers the first generation, built from 2012 to the present. This minivan has a single generation in the catalog with one body style, a five-door van. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 76 ft (23 m).

1generations19.5 mof film for a full wrap

Fiat 500L, first generation, factory photo
Fiat 500L, first generation. Factory color shown.

Fiat 500L wrap colors and ideas

  • Fiat 500L black wrap
  • Fiat 500L white wrap
  • Fiat 500L gray wrap
  • Fiat 500L silver wrap
  • Fiat 500L red wrap
  • Fiat 500L blue wrap
  • Fiat 500L green wrap
  • Fiat 500L yellow wrap
  • Fiat 500L orange wrap
  • Fiat 500L purple wrap
  • Fiat 500L pink wrap
  • Fiat 500L teal wrap
  • Fiat 500L brown wrap
  • Fiat 500L gold wrap
  • Fiat 500L chrome wrap
  • Fiat 500L color shift wrap
  • Fiat 500L carbon fiber wrap
  • Fiat 500L camo and patterned wrap

How much vinyl to wrap a Fiat 500L

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowvan (5 doors)163.0 in (4,140 mm) to 172.2 in (4,375 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Fiat 500L wrap cost factors

Fiat 500L wrap cost depends on the film type and the body options on the car. The length range of 163.0 in (4,140 mm) to 172.2 in (4,375 mm) changes the amount of material needed. A panoramic glass roof means less painted roof area to cover, while a two-tone body may need extra film to hide the second color. Cut-outs for sliding door tracks and fog lamps add labor time.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

Fiat 500L wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 500L, first generation, factory photo
Factory color shown

2012–now Fiat 500L van (first generation)

2012–nowvan (5 doors)163.0 in (4,140 mm) to 172.2 in (4,375 mm)

The first generation Fiat 500L has sliding side doors, and the tracks stay bare when the car is wrapped. The film is cut along the tracks so the doors can still slide without rubbing. A wrap installer plans the seams to follow the track lines for a clean edge.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Fiat 500L

A partial wrap on a Fiat 500L can cover the hood, mirror caps, or the roof on cars without the glass panel. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Fiat 500L: body, cut-outs and film

A Fiat 500L vinyl wrap must follow the boxy van body and its single five-door style. The length runs from 163.0 in (4,140 mm) to 172.2 in (4,375 mm), so wrap shops measure the exact car before cutting. The tall roof and flat sides use film efficiently, but the rear door and window cut-outs add labor. A wrap on this body covers all painted panels and leaves the glass clear.

Fiat 500L wrap ideas start with the sliding side door tracks, which stay bare and guide the film cut lines. Some trims have a panoramic glass roof, so the wrap ends at the roof rails and the glass is left unwrapped. A factory two-tone body on some trims can be kept as a split or covered with one color. Fog lamps in the front bumper on some trims need cut-outs in the bumper film.

How much vinyl to wrap a Fiat 500L depends on the year and the options, not just the generation. The first generation was restyled in 2017, but the body length still ranges from 163.0 in (4,140 mm) to 172.2 in (4,375 mm). The sliding door tracks and glass roof change how much film is cut away. A shop that wraps only the painted panels will use closer to the lower film estimate.

Questions about wrapping a Fiat 500L

How much vinyl does it take to wrap a Fiat 500L?

A full wrap of a Fiat 500L takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the estimate is about 76 ft (23 m). The exact amount depends on the body length and options like the glass roof.

Are the sliding doors of a Fiat 500L wrapped?

Yes, the sliding doors of a Fiat 500L are wrapped, but the tracks are left bare. The film is cut along the tracks so the doors can open and close without catching. The installer follows the track lines to keep the wrap edges neat.

Can the roof of a Fiat 500L be wrapped?

Yes, the roof of a Fiat 500L can be wrapped on cars without the panoramic glass roof. If the car has the glass roof, only the metal roof rails around the glass are wrapped. A two-tone factory roof can be covered or kept as a color split.

Which years of the Fiat 500L take the same film cuts?

The Fiat 500L has one generation from 2012 to the present, so the same film cuts apply across those years. The body was restyled in 2017, but the overall shape and door layout did not change. A wrap shop uses the same cut patterns for all years, with minor adjustments for trim pieces.