Wraps by car

Fiat Bravo wrap

The Fiat Bravo wrap page covers both generations of the Fiat Bravo and the film a full wrap of the newest body takes. The second generation from 2007–2014 is a five door hatchback, and the first generation from 1995–2001 is a three door hatchback. A full vinyl wrap of the second generation needs about 56 ft (17 m) of 60-inch (1.52 m) cast film.

2generations17 mof film for a full wrap

Fiat Bravo, second generation, factory photo
Fiat Bravo, second generation. Factory color shown.

Fiat Bravo wrap colors and ideas

  • Bravo black wrap
  • Bravo white wrap
  • Bravo gray wrap
  • Bravo silver wrap
  • Bravo red wrap
  • Bravo blue wrap
  • Bravo green wrap
  • Bravo yellow wrap
  • Bravo orange wrap
  • Bravo purple wrap
  • Bravo pink wrap
  • Bravo teal wrap
  • Bravo brown wrap
  • Bravo gold wrap
  • Bravo chrome wrap
  • Bravo color shift wrap
  • Bravo carbon fiber wrap
  • Bravo camo and patterned wrap

How much vinyl to wrap a Fiat Bravo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2014hatchback (5 doors)170.7 in (4,336 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1995–2001hatchback (3 doors)158.5 in (4,025 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Bravo wrap cost factors

Bravo wrap cost depends on the body size, the film type, and the amount of surface preparation. The second generation is 170.7 in (4,336 mm) long and the first is 158.5 in (4,025 mm), so the larger car takes more material. A color change wrap in a solid color is the base job, while chrome or patterned film adds more film and more careful alignment. Paint condition matters on a car of these years, and any repainted panels need a test spot before the full wrap.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Bravo wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Bravo, second generation, factory photo
Factory color shown

2007–2014 Bravo hatchback (second generation)

2007–2014hatchback (5 doors)170.7 in (4,336 mm)

The second generation Fiat Bravo from 2007–2014 is a five door hatchback that is 170.7 in (4,336 mm) long. A full wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 66 ft (20 m) for chrome or patterned film. Because these years are old enough for repainted panels, you must test the film on a small spot before the full wrap. The tailgate film ends at the edge of the rear glass, and fog lamps on some trims need cut-outs.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Fiat Bravo, first generation, factory photo
Factory color shown

1995–2001 Bravo hatchback (first generation)

1995–2001hatchback (3 doors)158.5 in (4,025 mm)

The first generation Fiat Bravo from 1995–2001 is a three door hatchback that is 158.5 in (4,025 mm) long. This smaller body needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, or about 59 ft (18 m) for chrome or patterned film. The two long side doors are each one large piece of film, and the tailgate film stops at the rear glass. Fewer panels and a shorter roof mean less film than the second generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Bravo

A partial wrap on a Fiat Bravo can cover the roof, hood, and mirror caps in a contrasting color. Bravo chrome delete turns the bright window trim and badges black with a vinyl overlay. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film and take less labor than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Fiat Bravo: body, cut-outs and film

The Fiat Bravo vinyl wrap starts with the compact hatchback shape and its body sizes. The second generation is 170.7 in (4,336 mm) long and the first generation measures 158.5 in (4,025 mm). A hatchback has a large roof and tailgate, so the wrap uses wide pieces of film. Five doors on the second generation add four door skins beyond the tailgate.

Bravo wrap ideas must account for the tailgate with its rear glass and the fog lamps on some trims. On both generations the film ends at the edge of the rear glass in the tailgate. The second generation with fog lamps in the front bumper needs cut-outs in the bumper film. The first generation has two long side doors, so each door is one large piece of film.

How much vinyl to wrap a Bravo changes between the first and second generations. The second generation needs about 56 ft (17 m) of 60-inch (1.52 m) cast film and the first needs about 48 ft (14.5 m) of the same width. If you choose chrome or patterned film, add about 10 ft (3 m) to each estimate. The second generation is longer and has two extra doors, so it uses more film.

Questions about wrapping a Fiat Bravo

How much vinyl does it take to wrap a Fiat Bravo?

A Fiat Bravo wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for the second generation. That figure is for a full color change wrap on the 2007–2014 five door hatchback. If you use chrome or patterned film, plan on about 66 ft (20 m).

Can I wrap only the hood or the roof of a Bravo?

Yes, you can wrap only the hood or the roof of a Bravo as a partial wrap. Partial wrap options include the roof, hood, and mirror caps in a different color. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end.

Is a Bravo hard to wrap?

A Bravo is not especially hard to wrap, but a few details add work. The tailgate on both generations has the rear glass in it, so the film must end at the edge of the glass. The second generation with fog lamps in the front bumper needs cut-outs in the bumper film. The first generation has two long side doors, so each door is one large piece of film.

How many generations of the Bravo does this page cover?

This page covers two generations of the Fiat Bravo. The first generation is from 1995–2001 and is a three door hatchback. The second generation is from 2007–2014 and is a five door hatchback.