Wraps by car

Fiat Pulse wrap

The Fiat Pulse wrap page covers the Fiat Pulse, its one generation, and the vinyl needed for a full wrap of the newest body. The model has been produced since 2021 and remains in production. A complete color change on the current SUV body uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 64 ft (19.5 m).

1generations17 mof film for a full wrap

Fiat Pulse, first generation, factory photo
Fiat Pulse, first generation. Factory color shown.

Fiat Pulse wrap colors and ideas

  • Pulse black wrap
  • Pulse white wrap
  • Pulse gray wrap
  • Pulse silver wrap
  • Pulse red wrap
  • Pulse blue wrap
  • Pulse green wrap
  • Pulse yellow wrap
  • Pulse orange wrap
  • Pulse purple wrap
  • Pulse pink wrap
  • Pulse teal wrap
  • Pulse brown wrap
  • Pulse gold wrap
  • Pulse chrome wrap
  • Pulse color shift wrap
  • Pulse carbon fiber wrap
  • Pulse camo and patterned wrap

How much vinyl to wrap a Fiat Pulse

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)157.4 in (3,998 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Pulse wrap cost factors

Pulse wrap cost depends on the area covered, the film type, and the amount of disassembly. A full wrap on the 157.4-inch (3,998-mm) SUV uses about 56 ft (17 m) of 60-inch cast film, or about 64 ft (19.5 m) if you choose chrome or a pattern. Partial jobs like a hood or roof wrap use less film but still require edge work and surface preparation. The tailgate design adds a little labor because the film must be trimmed along the edge of the rear glass.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2025: bumpers and lights differ between the versions, and so do the film cuts.

Pulse wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Pulse, first generation, factory photo
Factory color shown

2021–now Pulse SUV (first generation)

2021–nowSUV (5 doors)157.4 in (3,998 mm)

The first generation Fiat Pulse was launched in 2021 and continues today. A restyling appeared in 2025 with new bumpers and lights. That means the film templates for the front and rear ends changed at the restyling. For a pre-2025 Pulse, use the earlier cuts; for a 2025 or newer Pulse, use the updated cuts.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Pulse

A partial wrap on a Fiat Pulse covers the roof, hood, or mirror caps as separate jobs. Pulse chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as a clear film on the front end to guard against stone chips. You can combine a roof wrap with a chrome delete without needing to wrap the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Fiat Pulse: body, cut-outs and film

A Fiat Pulse vinyl wrap fits a subcompact SUV with five doors. The car measures 157.4 in (3,998 mm) from bumper to bumper, so the roof and side panels are modest in length. Its short overhangs and flat door surfaces keep the wrap job straightforward. You still need to account for the height of the tailgate and the roof rails when measuring film.

Pulse wrap ideas should account for the tailgate, because the rear glass is mounted in the tailgate itself. The film on the tailgate ends at the edge of the glass, so the installer trims along that line. Door handles, mirror caps, and the antenna base are removed or masked before the film goes on. The front and rear bumpers are left on the car and wrapped with the film tucked at the edges.

To know how much vinyl to wrap a Pulse, compare the pre-restyling and post-restyling bodies. The 2021 to 2024 production has one shape for the front bumper and lights. For 2025 onward, the restyled bumper and lights use different cuts, so the same template will not fit both versions. The rest of the body is unchanged, so the difference is only in the front and rear end pieces.

Questions about wrapping a Fiat Pulse

How much vinyl does it take to wrap a Fiat Pulse?

A Fiat Pulse takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full color change wrap. If you use chrome or patterned film, the amount rises to about 64 ft (19.5 m). These figures are for the current body with no major custom bodywork.

Which years of the Pulse take the same film cuts?

The same film cuts fit all Pulse models produced from 2021 through 2024. The 2025 restyling changed the bumpers and lights, so front and rear templates differ for 2025 and newer cars. Sides, roof, and tailgate cuts remain the same across all years.

Can I wrap only the hood or the roof of a Pulse?

Yes, you can wrap only the hood or the roof of a Pulse. A partial wrap on this car typically covers the roof, hood, or mirror caps as separate jobs. The tailgate is also a section that can be wrapped alone, with the film trimmed along the edge of the rear glass.

Is a Pulse hard to wrap?

A Pulse is not especially hard to wrap, but the tailgate adds one step of extra work. The rear glass is set into the tailgate, so the film must be cut and tucked along that edge. The car's small size, at 157.4 in (3,998 mm) long, keeps panel sizes manageable. Door handles, mirror caps, and the antenna base are removed or masked for a clean install.