Wraps by car

Fiat 500X wrap

This page is a Fiat 500X wrap guide for one generation sold from 2014 to now. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 67 ft (20.5 m) for the same car. The Fiat 500X is a five-door SUV with one restyling in 2018.

1generations18 mof film for a full wrap

Fiat 500X, first generation, factory photo
Fiat 500X, first generation. Factory color shown.

Fiat 500X wrap colors and ideas

  • Fiat 500X black wrap
  • Fiat 500X white wrap
  • Fiat 500X gray wrap
  • Fiat 500X silver wrap
  • Fiat 500X red wrap
  • Fiat 500X blue wrap
  • Fiat 500X green wrap
  • Fiat 500X yellow wrap
  • Fiat 500X orange wrap
  • Fiat 500X purple wrap
  • Fiat 500X pink wrap
  • Fiat 500X teal wrap
  • Fiat 500X brown wrap
  • Fiat 500X gold wrap
  • Fiat 500X chrome wrap
  • Fiat 500X color shift wrap
  • Fiat 500X carbon fiber wrap
  • Fiat 500X camo and patterned wrap

How much vinyl to wrap a Fiat 500X

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowSUV (5 doors)167.2 in (4,248 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Fiat 500X wrap cost factors

Fiat 500X wrap cost depends on the film choice and the labor for this specific SUV. A full wrap uses about 59 ft (18 m) of cast film, while chrome or patterned film adds material. The 2018 restyling affects cut time because bumpers and lights differ from the earlier version. The 167.2 in (4,248 mm) length is average for a small SUV, so it does not push the labor time up.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

Fiat 500X wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 500X, first generation, factory photo
Factory color shown

2014–now Fiat 500X SUV (first generation)

2014–nowSUV (5 doors)167.2 in (4,248 mm)

The Fiat 500X first generation covers 2014 to now, with a restyling in 2018. The restyling changed bumpers and lights, so film cut for one version does not fit the other. That means a wrap kit must match the production year before 2018 or after it. The body style stays a five-door SUV, so the main panel sizes do not change.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Fiat 500X

A partial wrap, chrome delete, or paint protection film (PPF) works for the Fiat 500X. A partial wrap covers the roof, hood, or mirror caps with vinyl. Chrome delete replaces bright trim with black film on the window trim and badges. Paint protection film (PPF) is clear film applied to the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Fiat 500X: body, cut-outs and film

The Fiat 500X vinyl wrap suits a compact five-door SUV body. The newest generation measures 167.2 in (4,248 mm) long, which is small enough to wrap with standard film rolls. A tailgate with the rear glass in it means the film ends at the edge of the glass. Straight panels and modest curves keep the material estimate at about 59 ft (18 m) for a full color change.

Fiat 500X wrap ideas start with the parts that need cut-outs or come off. Some trims have parking sensors in the bumpers, so the film is cut around each sensor. Cameras in the body on some trims also need cut-outs around each lens, and fog lamps in the front bumper require bumper film cut-outs. The tailgate glass defines the rear edge of the wrap for every version.

How much vinyl to wrap a Fiat 500X depends on the generation only slightly. The first generation runs from 2014 to now, and the restyling in 2018 changed bumpers and lights. Film cut for one version does not fit the other because of those new shapes. The total film estimate for a full wrap stays around 59 ft (18 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Fiat 500X

How much vinyl does it take to wrap a Fiat 500X?

About 59 ft (18 m) of 60-inch (1.52 m) cast film. That figure covers a full Fiat 500X wrap on the newest body. For chrome or patterned film, plan for about 67 ft (20.5 m) because of extra pattern matching.

Which years of the Fiat 500X take the same film cuts?

2014 to 2017 take the same film cuts, and 2018 to now take different cuts. The Fiat 500X restyling in 2018 changed bumpers and lights, so the first generation is not uniform across all years.

Can I wrap only the hood or the roof of a Fiat 500X?

Yes, the Fiat 500X supports partial wraps on the roof, hood, or mirror caps. A partial wrap can also be a chrome delete on window trim and badges, or paint protection film (PPF) on the front end.

Is a Fiat 500X hard to wrap?

A Fiat 500X is not hard to wrap, but some parts add work. Some trims have parking sensors in the bumpers and cameras in the body that need cut-outs. Fog lamps in the front bumper also need cut-outs, and the tailgate glass defines the film edge at the rear.