Wraps by car

Fiat Qubo wrap

The Fiat Qubo wrap page covers this compact minivan from its 2008 introduction to the present. One generation is listed, with a restyling in 2016. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Fiat Qubo, first generation, factory photo
Fiat Qubo, first generation. Factory color shown.

Fiat Qubo wrap colors and ideas

  • Qubo black wrap
  • Qubo white wrap
  • Qubo gray wrap
  • Qubo silver wrap
  • Qubo red wrap
  • Qubo blue wrap
  • Qubo green wrap
  • Qubo yellow wrap
  • Qubo orange wrap
  • Qubo purple wrap
  • Qubo pink wrap
  • Qubo teal wrap
  • Qubo brown wrap
  • Qubo gold wrap
  • Qubo chrome wrap
  • Qubo color shift wrap
  • Qubo carbon fiber wrap
  • Qubo camo and patterned wrap

How much vinyl to wrap a Fiat Qubo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–nowvan (5 doors)155.8 in (3,957 mm) to 155.9 in (3,959 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Qubo wrap cost factors

Qubo wrap cost depends on the size of the van, the film type, and the work on the sliding door tracks, roof rails, and fog lamp cut-outs. The body is 155.8 in (3,957 mm) to 155.9 in (3,959 mm) long, so a full wrap needs about 59 ft (18 m) of cast film. Chrome or patterned film raises the amount to about 69 ft (21 m). The installer also charges for the time spent on disassembly and trimming.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2016: bumpers and lights differ between the versions, and so do the film cuts.

Qubo wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Qubo, first generation, factory photo
Factory color shown

2008–now Qubo van (first generation)

2008–nowvan (5 doors)155.8 in (3,957 mm) to 155.9 in (3,959 mm)

The first generation Fiat Qubo leaves the sliding side door tracks bare, and the film is cut along them. This keeps the doors working smoothly without vinyl catching in the track. Installers plan the panel seams to follow the track lines. The result is a clean edge that matches the van's design.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Qubo

A partial wrap on a Fiat Qubo can cover the roof, hood, or mirror caps as separate jobs. A Qubo chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs use less material and take less time than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Fiat Qubo: body, cut-outs and film

A Fiat Qubo vinyl wrap has to follow the shape of a five-door van body that is 155.8 in (3,957 mm) to 155.9 in (3,959 mm) long. The tall, boxy sides give the installer large flat panels to work with. The sliding side doors call for careful trimming around their tracks. The short length keeps material use close to the estimate for a minivan of this size.

Qubo wrap ideas start with the sliding side doors, because the door tracks stay bare and decide where the film is cut. Roof rails are present on every trim and must come off before the roof is wrapped or the film is cut along them. Some trims have fog lamps in the front bumper, so the bumper film needs cut-outs. These details change how the wrap is planned around the moving parts.

How much vinyl to wrap a Qubo depends on the body length, which runs from 155.8 in (3,957 mm) to 155.9 in (3,959 mm). The single generation was restyled in 2016, but the main dimensions stay nearly the same. Someone counting film can treat all years as one body for a full wrap. A chrome or patterned film adds about 10 ft (3 m) to the estimate.

Questions about wrapping a Fiat Qubo

How much vinyl does it take to wrap a Fiat Qubo?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Fiat Qubo. Chrome or patterned film needs about 69 ft (21 m) because of extra material for seams and waste. The estimate assumes the newest body of the single generation.

Are the sliding doors of a Qubo wrapped?

Yes, the sliding doors of a Qubo are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close without rubbing. The installer works around the track area with precision.

Which years of the Qubo take the same film cuts?

All years of the Fiat Qubo take the same film cuts, from 2008 through the present. The restyling in 2016 did not change the body shape enough to alter the wrap pattern. The single generation has one set of templates for the sliding door tracks and roof rails.

Can I wrap only the hood or the roof of a Qubo?

Yes, you can wrap only the hood or the roof of a Qubo. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges, and paint protection film (PPF) protects the front end.