Wraps by car

Fiat Panda wrap

This page covers the Fiat Panda wrap across its three generations, from the first-generation hatchback and van up to the current third-generation model. A full wrap of the newest body uses about 43 ft (13 m) of 60-inch (1.52 m) cast film. Owners of any Panda can use the notes here to plan a vinyl wrap that fits their car.

3generations13 mof film for a full wrap

Fiat Panda, third generation, factory photo
Fiat Panda, third generation. Factory color shown.

Fiat Panda wrap colors and ideas

  • Panda black wrap
  • Panda white wrap
  • Panda gray wrap
  • Panda silver wrap
  • Panda red wrap
  • Panda blue wrap
  • Panda green wrap
  • Panda yellow wrap
  • Panda orange wrap
  • Panda purple wrap
  • Panda pink wrap
  • Panda teal wrap
  • Panda brown wrap
  • Panda gold wrap
  • Panda chrome wrap
  • Panda color shift wrap
  • Panda carbon fiber wrap
  • Panda camo and patterned wrap

How much vinyl to wrap a Fiat Panda

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–nowhatchback (5 doors)143.8 in (3,653 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
2003–2012hatchback (5 doors)139.3 in (3,538 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1981–2003hatchback, van (3 or 4 doors)133.1 in (3,380 mm) to 135.0 in (3,430 mm)about 38 ft (11.5 m) for the hatchback to 49 ft (15 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Panda wrap cost factors

Panda wrap cost depends mostly on the amount of film, the complexity of the bodywork, and the labor involved in a full color change wrap. The newest car needs about 43 ft (13 m) of 60-inch (1.52 m) cast film, while the first-generation van can need up to 56 ft (17 m) for chrome or patterned film. Bumpers with fog lamps or sliding side door tracks add cut-out work that affects the final cost. The final figure also changes with the installer’s experience and any extra film for test spots on older paint.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Panda wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Panda, third generation, factory photo
Factory color shown

2011–now Panda hatchback (third generation)

2011–nowhatchback (5 doors)143.8 in (3,653 mm)

The third-generation Fiat Panda was produced from 2011 to now and is a five-door hatchback with a length of 143.8 in (3,653 mm). Because the car may be a decade old or more, its panels could be original paint or have been repainted after damage. A test spot on a repainted area is a useful step before a full wrap to check film adhesion.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Fiat Panda, second generation, factory photo
Factory color shown

2003–2012 Panda hatchback (second generation)

2003–2012hatchback (5 doors)139.3 in (3,538 mm)

The second-generation Fiat Panda was built from 2003 to 2012 and is also a five-door hatchback, 139.3 in (3,538 mm) long. Its production overlaps with the newer third-generation body in 2011 and 2012, so an owner of a car from those years should check which body style they have before ordering film. The second generation uses about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Fiat Panda, first generation, factory photo
Factory color shown

1981–2003 Panda hatchback, van (first generation)

1981–2003hatchback, van (3 or 4 doors)133.1 in (3,380 mm) to 135.0 in (3,430 mm)

The first-generation Fiat Panda was made from 1981 to 2003 and came as a hatchback or a van with three or four doors. The sliding side doors on the van leave their tracks bare, and the film is cut along those tracks rather than wrapped over them. The hatchback is the shortest Panda at 133.1 in (3,380 mm) and uses about 38 ft (11.5 m) of film, while the van can use up to 49 ft (15 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 38 ft (11.5 m) for the hatchback to 49 ft (15 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Panda

A partial wrap on a Fiat Panda can cover just the roof, hood, or mirror caps, leaving the rest of the paint exposed. For a Panda chrome delete, the window trim and badges are covered with black film to change the look without wrapping large panels. Paint protection film (PPF) is another small job: a clear film is applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Fiat Panda: body, cut-outs and film

The third-generation Fiat Panda measures 143.8 in (3,653 mm) as a five-door hatchback, so a full vinyl wrap needs about 43 ft (13 m) of 60-inch (1.52 m) cast film. Its compact size and upright tailgate make panel coverage straightforward for an installer. The smaller dimensions of older generations mean less material, but the shapes are equally simple to wrap.

Panda wrap ideas start with the tailgate, because the rear glass is set into the metal and the film must end at the edge of the glass. The second generation may also have fog lamps in the front bumper that require cut-outs in the film. A clean cut around the glass and lamps keeps the wrap looking factory-finished.

To find how much vinyl to wrap a Panda, note that the first generation is the smallest, at 133.1 in (3,380 mm) to 135.0 in (3,430 mm) long, and uses 38 ft (11.5 m) to 49 ft (15 m) depending on whether it is a hatchback or a van. The second generation is slightly larger and uses about 46 ft (14 m). The newest body uses about 43 ft (13 m), so material quantities differ by generation and body style.

Questions about wrapping a Fiat Panda

How much vinyl does it take to wrap a Fiat Panda?

A full wrap of the newest Fiat Panda uses about 43 ft (13 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the estimate rises to about 54 ft (16.5 m). The smaller first generation needs less film for the hatchback but more for the van.

Can I wrap only the hood or the roof of a Panda?

Yes, you can wrap only the hood or the roof of a Fiat Panda. A partial wrap of these panels uses less film than a full wrap and can be a good way to change the color of the car without covering every panel. Chrome delete is another limited job that covers the window trim and badges.

Is a Panda hard to wrap?

A Fiat Panda is not the hardest car to wrap, but its compact size and simple five-door hatch shape keep the job manageable. The tailgate on every generation has the rear glass set into the metal, so the film must be cut precisely at the edge of the glass. The first-generation van adds sliding side door tracks that must stay bare, which requires extra cutting time. Some second-generation cars have fog lamps in the front bumper that need cut-outs in the film.

How many generations of the Panda does this page cover?

This page covers three generations of the Fiat Panda: the first generation from 1981 to 2003, the second generation from 2003 to 2012, and the third generation from 2011 to now. The first generation includes both hatchback and van body styles, while the second and third generations are five-door hatchbacks.