Wraps by car

Fiat Panda Cross wrap

The Fiat Panda Cross wrap section covers the lifted, third-generation hatchback. One generation is in the catalog, made from 2014 onward. A full wrap of this newest body takes about 51 ft (15.5 m) of standard vinyl wrap.

1generations15.5 mof film for a full wrap

Fiat Panda Cross, third generation, factory photo
Fiat Panda Cross, third generation. Factory color shown.

Fiat Panda Cross wrap colors and ideas

  • Panda Cross black wrap
  • Panda Cross white wrap
  • Panda Cross gray wrap
  • Panda Cross silver wrap
  • Panda Cross red wrap
  • Panda Cross blue wrap
  • Panda Cross green wrap
  • Panda Cross yellow wrap
  • Panda Cross orange wrap
  • Panda Cross purple wrap
  • Panda Cross pink wrap
  • Panda Cross teal wrap
  • Panda Cross brown wrap
  • Panda Cross gold wrap
  • Panda Cross chrome wrap
  • Panda Cross color shift wrap
  • Panda Cross carbon fiber wrap
  • Panda Cross camo and patterned wrap

How much vinyl to wrap a Fiat Panda Cross

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowhatchback (5 doors)145.9 in (3,705 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Panda Cross wrap cost factors

The cost of a Panda Cross wrap depends on the film you choose and the size of the job. A standard cast film wrap uses about 51 ft (15.5 m), while chrome or patterned film needs about 62 ft (19 m). The tall roof and removable trim parts add labor.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (74.1 in (1,882 mm)): the roof is wrapped from a platform.

Panda Cross wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Panda Cross, third generation, factory photo
Factory color shown

2014–now Panda Cross hatchback (third generation)

2014–nowhatchback (5 doors)145.9 in (3,705 mm)

The Panda Cross third generation is a five-door hatchback built from 2014 to the present. Its height of 74.1 in (1,882 mm) means the roof must be wrapped from a platform. This extra step takes more time than on lower cars.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.1 in (1,882 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Panda Cross

For a smaller job, a partial wrap on the Panda Cross can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end as a clear shield.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Fiat Panda Cross: body, cut-outs and film

The Fiat Panda Cross is a small five-door hatchback with a length of 145.9 in (3,705 mm). Its compact size keeps material use to about 51 ft (15.5 m) for a full wrap. The upright body and squared rear shape simplify panel layout.

A Panda Cross wrap requires careful work around the tailgate, where the rear glass sits flush inside the panel. The film is cut to end at the edge of the glass. The tall body, at 74.1 in (1,882 mm), means the roof is wrapped from a platform.

This page covers one generation of the Panda Cross, produced since 2014. If you compare film quantities, all years of this generation share the same body dimensions. For earlier Fiat Panda models, a different estimate applies.

Questions about wrapping a Fiat Panda Cross

How much vinyl does it take to wrap a Fiat Panda Cross?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Fiat Panda Cross. If you use chrome or patterned film, allow about 62 ft (19 m).

Can I wrap only the hood or the roof of a Panda Cross?

Yes, you can wrap only the hood or the roof of a Panda Cross. A partial wrap on this car is often done on the roof, hood, or mirror caps.

Is a Panda Cross hard to wrap?

A Panda Cross adds work because of its tall body and tailgate design. The body height of 74.1 in (1,882 mm) means the roof is wrapped from a platform. The rear glass sits inside the tailgate, so the film must be cut to its edge.

How many generations of the Panda Cross does this page cover?

This page covers one generation of the Panda Cross, the third generation made from 2014 onward.