Wraps by car

Kia EV5 wrap

This page covers the Kia EV5 wrap, a vinyl wrap project for the first-generation electric SUV. The EV5 has been produced from 2023 to the present in a five-door SUV body style. A full wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film, or about 72 ft (22 m) with chrome or patterned film.

1generations19 mof film for a full wrap

Kia EV5, first generation, factory photo
Kia EV5, first generation. Factory color shown.

Kia EV5 wrap colors and ideas

  • Kia EV5 black wrap
  • Kia EV5 white wrap
  • Kia EV5 gray wrap
  • Kia EV5 silver wrap
  • Kia EV5 red wrap
  • Kia EV5 blue wrap
  • Kia EV5 green wrap
  • Kia EV5 yellow wrap
  • Kia EV5 orange wrap
  • Kia EV5 purple wrap
  • Kia EV5 pink wrap
  • Kia EV5 teal wrap
  • Kia EV5 brown wrap
  • Kia EV5 gold wrap
  • Kia EV5 chrome wrap
  • Kia EV5 color shift wrap
  • Kia EV5 carbon fiber wrap
  • Kia EV5 camo and patterned wrap

How much vinyl to wrap a Kia EV5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)181.7 in (4,615 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Kia EV5 wrap cost factors

Kia EV5 wrap cost depends on the film chosen and the labor for this specific body. The size of 181.7 in (4,615 mm) and the number of panels influence how much film and time a shop needs. A solid color wrap needs less film than a chrome or patterned design, so material use changes the quote. Removing the charge port door and working around the tailgate glass add small steps that affect the total.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Kia EV5 wraps by generation

Swipe sideways. Tap a card for the full description.

Kia EV5, first generation, factory photo
Factory color shown

2023–now Kia EV5 SUV (first generation)

2023–nowSUV (5 doors)181.7 in (4,615 mm)

The first-generation Kia EV5 is a five-door SUV that measures 181.7 in (4,615 mm) long. A full wrap covers the hood, roof, fenders, doors, quarter panels, bumpers, and the tailgate with the rear glass inset. The tailgate film ends at the edge of the glass, so the installer does not wrap the glass itself. The charge port door is wrapped as a small separate piece because it is an electric car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Kia EV5

A partial wrap on the Kia EV5 can cover the roof, hood, or mirror caps instead of the whole body. A chrome delete covers the window trim and badges with black film, a job that uses very little material. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs are good ways to change the look of the EV5 without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia EV5: body, cut-outs and film

The Kia EV5 vinyl wrap covers a body that is 181.7 in (4,615 mm) long with a tailgate and rear glass. The five-door SUV shape means the wrap is split across hood, roof, fenders, doors, quarter panels, bumpers, and the tailgate. Cast film is recommended because the EV5 has deep bumper contours and a large rear hatch. The charge port door is wrapped as a small separate piece to keep the film edge clean.

Kia EV5 wrap ideas include a color change wrap in gloss, satin, or matte finish. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) can be applied to the front end as a clear protective layer. Custom patterns add about 10 ft (3 m) more film than a solid color because of alignment and waste.

How much vinyl to wrap a Kia EV5 depends on the film type and the installer's cutting plan. A solid color wrap uses about 62 ft (19 m) of 60-inch (1.52 m) film, while chrome or patterned film needs about 72 ft (22 m). The first generation is the only one in the catalog, so there is no older body to compare. The tailgate with glass inset means the film ends at the glass edge, not around the whole hatch.

Questions about wrapping a Kia EV5

How much vinyl does it take to wrap a Kia EV5?

About 62 ft (19 m) of 60-inch (1.52 m) cast film is needed to wrap a Kia EV5. If you use chrome or patterned film, the amount goes up to about 72 ft (22 m) because of pattern matching and extra waste.

Can I wrap only the hood or the roof of a Kia EV5?

Yes, you can wrap only the hood or the roof of a Kia EV5. A partial wrap can cover the roof, hood, or mirror caps, and a chrome delete covers just the window trim and badges.

Is a Kia EV5 hard to wrap?

The Kia EV5 is not especially hard to wrap, but a few details add work. The tailgate has the rear glass set into it, so the film must end neatly at the glass edge. The charge port door is wrapped as a small separate piece on this electric car. The body is 181.7 in (4,615 mm) long, so the installer needs a large work area.

How many generations of the Kia EV5 does this page cover?

This page covers one generation of the Kia EV5, the first generation, produced from 2023 to now. There is only one body style in the catalog for this model.