Wraps by car

Kia Seltos wrap

A Kia Seltos wrap covers the body of this compact SUV with vinyl film. The Seltos has been in production for one generation, starting in 2019 and continuing today. The current body is 172.0 in (4,370 mm) long, and a full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Kia Seltos, first generation, factory photo
Kia Seltos, first generation. Factory color shown.

Kia Seltos wrap colors and ideas

  • Seltos black wrap
  • Seltos white wrap
  • Seltos gray wrap
  • Seltos silver wrap
  • Seltos red wrap
  • Seltos blue wrap
  • Seltos green wrap
  • Seltos yellow wrap
  • Seltos orange wrap
  • Seltos purple wrap
  • Seltos pink wrap
  • Seltos teal wrap
  • Seltos brown wrap
  • Seltos gold wrap
  • Seltos chrome wrap
  • Seltos color shift wrap
  • Seltos carbon fiber wrap
  • Seltos camo and patterned wrap

How much vinyl to wrap a Kia Seltos

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)172.0 in (4,370 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Seltos wrap cost factors

Seltos wrap cost depends on how much of the car is covered and which film you choose. A full wrap of this 172.0 in (4,370 mm) SUV uses about 59 ft (18 m) of cast film, while chrome or patterned film needs about 66 ft (20 m). The number of cut-outs for sensors, cameras, and trim removal also affects the labor. Choosing a partial job like the hood or chrome delete lowers the material and fitting time.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2022: bumpers and lights differ between the versions, and so do the film cuts.

Seltos wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Seltos, first generation, factory photo
Factory color shown

2019–now Seltos SUV (first generation)

2019–nowSUV (5 doors)172.0 in (4,370 mm)

The first generation Seltos was introduced in 2019 and is still in production as an SUV with five doors. It received a restyling in 2022 that changed the bumpers and lights, so film templates do not transfer between early and late versions. The overall length stayed the same at 172.0 in (4,370 mm), so the roof and side panels use the same amount of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Seltos

A partial wrap on a Seltos covers the roof, hood, or mirror caps without wrapping the whole car. A Seltos chrome delete replaces the bright window trim and badges with black film. Clear paint protection film (PPF) on the front end keeps the bumper, hood, and fenders from stone chips. These smaller jobs use less film and take less time than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia Seltos: body, cut-outs and film

A Kia Seltos vinyl wrap follows the five-door SUV body, so the roof, hood, doors, fenders, and tailgate are all covered. The car measures 172.0 in (4,370 mm) long, which makes it a compact project for two installers working together. The flat sides and large hood help the film lay down evenly without excessive stretching. The tailgate includes the rear glass, so the film stops at the edge of the glass.

Seltos wrap ideas start with the parts that need extra care. Some trims have roof rails that are removed before wrapping the roof or the film is cut along them. Parking sensors in the bumpers and cameras in the body require precise cut-outs around each sensor or lens. Fog lamps in the front bumper also need cut-outs in the bumper film.

The Seltos has only one generation, so the film measurements stay the same from 2019 onward. The restyling in 2022 changed the bumpers and lights, so film cut for one version does not fit the other. If you count film for a full wrap, the body length of 172.0 in (4,370 mm) is the same before and after the update. However, a chrome or patterned film adds about 7 ft (2.1 m) to the estimate.

Questions about wrapping a Kia Seltos

How much vinyl does it take to wrap a Kia Seltos?

How much vinyl does it take to wrap a Kia Seltos? A full wrap of the current Seltos body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 66 ft (20 m) because of extra trimming and pattern matching.

Which years of the Seltos take the same film cuts?

Which years of the Seltos take the same film cuts? The Seltos has been produced from 2019 to the present, and the same film cuts fit all years. A restyling in 2022 changed the bumpers and lights, so the bumper film must match the version before or after that update. The roof, doors, and tailgate cuts are the same for every year.

Can I wrap only the hood or the roof of a Seltos?

Can I wrap only the hood or the roof of a Seltos? Yes, a partial wrap on a Seltos can cover the hood, roof, mirror caps, or any combination. The hood and roof are flat panels that use less film and are easier to fit than the full body. This kind of job is a good way to add a stripe or a different color without a full color change wrap.

Is a Seltos hard to wrap?

Is a Seltos hard to wrap? The Seltos is a compact SUV with a length of 172.0 in (4,370 mm), so it is a manageable size for a wrap installer. Some trims have roof rails that must be removed or cut around, and parking sensors or cameras in the body add cut-out work. The tailgate with integrated glass means the film ends at the glass edge, which is a standard technique.