Wraps by car

Kia K4 wrap

The Kia K4 wrap catalog covers two generations of the compact sedan and hatchback. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 10 ft (3 m) to the job, bringing the total to about 67 ft (20.5 m).

2generations17.5 mof film for a full wrap

Kia K4, second generation, factory photo
Kia K4, second generation. Factory color shown.

Kia K4 wrap colors and ideas

  • Kia K4 black wrap
  • Kia K4 white wrap
  • Kia K4 gray wrap
  • Kia K4 silver wrap
  • Kia K4 red wrap
  • Kia K4 blue wrap
  • Kia K4 green wrap
  • Kia K4 yellow wrap
  • Kia K4 orange wrap
  • Kia K4 purple wrap
  • Kia K4 pink wrap
  • Kia K4 teal wrap
  • Kia K4 brown wrap
  • Kia K4 gold wrap
  • Kia K4 chrome wrap
  • Kia K4 color shift wrap
  • Kia K4 carbon fiber wrap
  • Kia K4 camo and patterned wrap

How much vinyl to wrap a Kia K4

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowhatchback, sedan (4 or 5 doors)185.4 in (4,709 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
2014–nowsedan (4 doors)185.8 in (4,720 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Kia K4 wrap cost factors

The Kia K4 wrap cost depends on the amount of film, the body style, and the number of parts removed. You start with 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full color change, or 67 ft (20.5 m) for chrome or patterned film. The hatchback adds labor because the liftgate and its glass must be handled as one large panel. A sedan has simpler rear body lines, so the installer spends less time on the trunk and rear bumper.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Kia K4 wraps by generation

Swipe sideways. Tap a card for the full description.

Kia K4, second generation, factory photo
Factory color shown

2024–now Kia K4 hatchback, sedan (second generation)

2024–nowhatchback, sedan (4 or 5 doors)185.4 in (4,709 mm)

The second-generation Kia K4 offers a hatchback and a sedan, and the body style decides the panel plan and the film amount. A hatchback wrap has one continuous piece from the roof down to the tailgate edge, while the sedan splits that area into a rear deck and a separate trunk lid. Both styles use about 57 ft (17.5 m) of film, but the hatchback often needs more time to trim around the glass and the liftgate opening.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Kia K4, first generation, factory photo
Factory color shown

2014–now Kia K4 sedan (first generation)

2014–nowsedan (4 doors)185.8 in (4,720 mm)

The first-generation Kia K4 is a four-door sedan built from 2014, and its production years overlap with the newer body starting in 2024. If you own a K4 from that overlap period, check the body shape: the first generation is a sedan only, while the second generation adds a hatchback. A 2018 restyle changed the front and rear fascias, but the length stayed close to 185.8 in (4,720 mm) and the film needed remains about 57 ft (17.5 m).

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Kia K4

A partial wrap on a Kia K4 can cover the roof, hood, or mirror caps without changing the whole car. A chrome delete turns the window trim and badges black with a narrow strip of film, and it needs only a few feet of material. Paint protection film (PPF) is a clear front-end wrap that shields the hood, fenders, and bumper from stone chips. These smaller jobs use less film than a full color change and allow the installer to work around the car's existing paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia K4: body, cut-outs and film

A Kia K4 vinyl wrap is planned around the body style and its 185.4 in (4,709 mm) length for the current model. The hatchback has a liftgate that reaches into the roof, so the film for that panel is cut as one piece. The sedan keeps the trunk separate, which makes the rear deck and bumper easier to seam. Both styles use about the same total film because the extra hatch area is offset by the sedan's larger rear quarters.

Kia K4 wrap ideas often start with removing the door handles, mirrors, and badges for a clean install. The tailgate on the hatchback has the rear glass set into it, so the film ends at the edge of the glass and needs no extra trimming on the glass itself. The factory emblems leave alignment holes that a good installer will fill or cover before the vinyl goes on. The front and rear bumpers should come off if you want the film tucked behind their edges.

To work out how much vinyl to wrap a Kia K4, compare the two generations by their film estimates and body shapes. The first-generation sedan from 2014 and the second-generation models from 2024 both measure about 57 ft (17.5 m) of film in a full wrap, because the lengths are nearly identical at 185.8 in (4,720 mm) and 185.4 in (4,709 mm). If the car is a hatchback, budget the same 57 ft (17.5 m) but expect a more complex cut around the liftgate. A restyled 2018 first-generation sedan uses the same amount of film as earlier cars, with only minor trim changes.

Questions about wrapping a Kia K4

How much vinyl does it take to wrap a Kia K4?

A Kia K4 full wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl. That figure covers the newest body style, a compact sedan or hatchback measuring 185.4 in (4,709 mm) in length. If you choose a chrome or patterned film, plan on about 67 ft (20.5 m) to match the pattern direction.

Which Kia K4 body takes more film?

The Kia K4 hatchback and sedan take the same amount of film, about 57 ft (17.5 m). The hatchback's liftgate and roof form one long panel, but the sedan's separate trunk lid and larger rear quarters balance out the difference. For pattern or chrome film the hatchback may waste a little more because the large tailgate piece must align with the design.

Can I wrap only the hood or the roof of a Kia K4?

Yes, you can wrap only the hood or the roof of a Kia K4. A partial wrap often covers the roof, hood, or mirror caps in a contrasting color or finish. The hood is a flat, easy panel on both generations, while the roof on the sedan stops at the rear window and on the hatchback it continues into the tailgate.

Is a Kia K4 hard to wrap?

A Kia K4 is not hard to wrap, but the hatchback version has a tailgate with the rear glass in it, which adds work for the installer. The film must be cut to follow the edge of the glass and the tailgate opening, and one wrong slice can ruin the panel. The sedan is simpler because the trunk lid is separate and the roof has a clear stop at the back window.