Wraps by car

Kia Ray wrap

The Kia Ray wrap page covers the first-generation Kia Ray minivan, produced from 2011 to the present day. A full vinyl wrap on the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 62 ft (19 m).

1generations16.5 mof film for a full wrap

Kia Ray wrap colors and ideas

  • Ray black wrap
  • Ray white wrap
  • Ray gray wrap
  • Ray silver wrap
  • Ray red wrap
  • Ray blue wrap
  • Ray green wrap
  • Ray yellow wrap
  • Ray orange wrap
  • Ray purple wrap
  • Ray pink wrap
  • Ray teal wrap
  • Ray brown wrap
  • Ray gold wrap
  • Ray chrome wrap
  • Ray color shift wrap
  • Ray carbon fiber wrap
  • Ray camo and patterned wrap

How much vinyl to wrap a Kia Ray

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–nowvan (5 doors)141.5 in (3,595 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Ray wrap cost factors

The Ray wrap cost depends on the film type, the number of panels covered, and the labor involved. A full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) film, while chrome or patterned film requires about 62 ft (19 m). Removing the door handles, badges, and other trim adds time. The sliding door tracks require careful cutting, which also affects the final price.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2018, 2022: bumpers and lights differ between the versions, and so do the film cuts.

Ray wraps by generation

Swipe sideways. Tap a card for the full description.

2011–now Ray van (first generation)

2011–nowvan (5 doors)141.5 in (3,595 mm)

The first-generation Kia Ray, sold from 2011 onward, is the only generation in this catalog. Its sliding side doors have tracks that stay bare and decide where the vinyl film is cut. The restyles in 2018 and 2022 kept the same door design and overall length. A full wrap on this generation uses about 54 ft (16.5 m) of standard cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Ray

A partial wrap on a Kia Ray can cover the roof, hood, or mirror caps for a lower-cost change. A chrome delete covers the bright window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. The sliding door tracks are left bare in all these options.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia Ray: body, cut-outs and film

The Kia Ray has one body style, a five-door van, which measures 141.5 in (3,595 mm) in length. This compact footprint keeps the amount of vinyl wrap material relatively low for a minivan. The tall, boxy shape has large flat sides that are easy to cover with wide film. The sliding doors add a few extra cuts but do not increase the film estimate.

Ray wrap ideas should account for the sliding side doors and their exposed tracks. The door tracks stay bare, so the film must be cut cleanly along them. The door handles, badges, and trim pieces are removed or masked before wrapping for a neat finish. The roof and mirror caps can be wrapped separately if you want a two-tone look.

When counting how much vinyl to wrap a Ray, remember that all production years share the same body dimensions. The film estimate stays the same for a 2011 model and a current one. The restyling in 2018 and 2022 changed the front and rear fascias, but the overall length remained 141.5 in (3,595 mm). For a full wrap, buy about 54 ft (16.5 m) of standard cast film.

Questions about wrapping a Kia Ray

How much vinyl does it take to wrap a Kia Ray?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a Kia Ray. That figure covers the full exterior of the current first-generation model. If you use chrome or patterned film, you need about 62 ft (19 m). The sliding door tracks are not wrapped, so they do not add material.

Are the sliding doors of a Ray wrapped?

No, the sliding door tracks of a Kia Ray are not wrapped. The film is cut along the tracks so they remain exposed and functional. Wrapping over the tracks would interfere with the door movement. The installer will trim the vinyl precisely to follow the track line.

Which years of the Ray take the same film cuts?

All years of the Kia Ray, from 2011 to the present, take the same film cuts. The body dimensions did not change through the restyling in 2018 and 2022. The sliding door tracks and overall length of 141.5 in (3,595 mm) stayed the same. A wrap kit designed for one year will fit every other year.

Can I wrap only the hood or the roof of a Ray?

Yes, you can wrap only the hood or the roof of a Kia Ray. A partial wrap can also include the mirror caps. The hood and roof are flat panels that are easy to cover with vinyl. The sliding door tracks are not touched in these smaller jobs.