Wraps by car

Kia XCeed wrap

A Kia XCeed wrap is a color change or protective film applied to the exterior of this compact SUV. The catalog covers one generation of the Kia XCeed, produced from 2019 to the present. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. A vinyl wrap in chrome or a patterned film needs about 67 ft (20.5 m) of material.

1generations18 mof film for a full wrap

Kia XCeed, first generation, factory photo
Kia XCeed, first generation. Factory color shown.

Kia XCeed wrap colors and ideas

  • XCeed black wrap
  • XCeed white wrap
  • XCeed gray wrap
  • XCeed silver wrap
  • XCeed red wrap
  • XCeed blue wrap
  • XCeed green wrap
  • XCeed yellow wrap
  • XCeed orange wrap
  • XCeed purple wrap
  • XCeed pink wrap
  • XCeed teal wrap
  • XCeed brown wrap
  • XCeed gold wrap
  • XCeed chrome wrap
  • XCeed color shift wrap
  • XCeed carbon fiber wrap
  • XCeed camo and patterned wrap

How much vinyl to wrap a Kia XCeed

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)173.0 in (4,395 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

XCeed wrap cost factors

The XCeed wrap cost depends on the film area of this SUV, which is about 59 ft (18 m) for a standard color change. A chrome or patterned film raises the amount to about 67 ft (20.5 m) because of pattern alignment. The installer's time is also a factor: the XCeed has parking sensors and cameras on every trim that need cut-outs. The 2022 restyling adds a step because bumper film cuts differ before and after that year.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Restyled in 2022: bumpers and lights differ between the versions, and so do the film cuts.

XCeed wraps by generation

Swipe sideways. Tap a card for the full description.

Kia XCeed, first generation, factory photo
Factory color shown

2019–now XCeed SUV (first generation)

2019–nowSUV (5 doors)173.0 in (4,395 mm)

The first generation Kia XCeed, built from 2019 to now, received a restyling in 2022. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. A full wrap of this 173.0 in (4,395 mm) SUV takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. The body style stayed the same five-door SUV throughout the generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an XCeed

An XCeed chrome delete covers the window trim and badges with black film as a smaller job than a full wrap. A partial wrap on a Kia XCeed includes the roof, hood, and mirror caps for a two-tone look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These options let an owner change specific areas without wrapping the whole SUV.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia XCeed: body, cut-outs and film

A Kia XCeed vinyl wrap covers one SUV body style with five doors and a length of 173.0 in (4,395 mm). The tailgate includes the rear glass, so the film ends cleanly at the edge of the glass. Parking sensors in the bumpers on every trim require the film to be cut around each sensor. Cameras in the body on every trim also need precise cut-outs around each lens.

XCeed wrap ideas start with the tailgate, where the film follows the edge of the rear glass instead of wrapping behind it. Every trim has parking sensors in the bumpers, and the installer cuts the film around each sensor for a clean fit. Cameras in the body on every trim are another point that needs a cut-out around the lens. Removing the bumpers is an option for a fully tucked edge, but careful cutting can avoid that step.

To work out how much vinyl to wrap an XCeed, count on about 59 ft (18 m) of 60-inch (1.52 m) cast film for the first generation body. A chrome or patterned film requires more material because of matching, about 67 ft (20.5 m). The XCeed has had only one generation since 2019, so the body dimensions stay the same across all production years. The restyling in 2022 changed only the bumpers and lights.

Questions about wrapping a Kia XCeed

How much vinyl does it take to wrap a Kia XCeed?

It takes about 59 ft (18 m) of 60-inch (1.52 m) film to wrap a Kia XCeed for a standard color change. A chrome or patterned film requires about 67 ft (20.5 m) on this SUV because of pattern matching.

Which years of the XCeed take the same film cuts?

The XCeed has only one generation, produced from 2019 to now, but the 2022 restyling splits the film cuts. The bumpers and lights changed with the restyling, so film cut for a 2019–2021 XCeed does not fit a 2022 or newer model.

Can I wrap only the hood or the roof of an XCeed?

Yes, you can wrap only the hood or the roof of an XCeed. A partial wrap on this SUV typically includes the roof, hood, and mirror caps, and the hood or roof can be done alone.

Is an XCeed hard to wrap?

The XCeed has a few points that add work to a wrap. The tailgate includes the rear glass, so the film ends at the edge of the glass. Every trim has parking sensors in the bumpers and cameras in the body, and the installer cuts around each sensor and lens.