Wraps by car

Kia Tasman wrap

The Kia Tasman wrap page covers the first generation pickup produced from 2024 onward. A full vinyl wrap of the newest body takes around 18 meters (59 feet) of film when the cab and bed are done together. The Tasman is a body-on-frame pickup with either two or four doors, and its separate bed changes how the vinyl is planned. This page gathers the film sizes, cut-out points and cost factors for wrapping the Tasman.

1generations

Kia Tasman, first generation, factory photo
Kia Tasman, first generation. Factory color shown.

Kia Tasman wrap colors and ideas

  • Tasman black wrap
  • Tasman white wrap
  • Tasman gray wrap
  • Tasman silver wrap
  • Tasman red wrap
  • Tasman blue wrap
  • Tasman green wrap
  • Tasman yellow wrap
  • Tasman orange wrap
  • Tasman purple wrap
  • Tasman pink wrap
  • Tasman teal wrap
  • Tasman brown wrap
  • Tasman gold wrap
  • Tasman chrome wrap
  • Tasman color shift wrap
  • Tasman carbon fiber wrap
  • Tasman camo and patterned wrap

How much vinyl to wrap a Kia Tasman

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowpickup (2 or 4 doors)——

Tasman wrap cost factors

Tasman wrap cost is driven by the size of the cab, the separate bed body and the film choice. The film estimate of 18 meters (59 feet) is the base for a full wrap, so shorter rolls or premium films change the material use. The bed adds a second body with its own set of edges, but it is a simple shape with no wheel arch flare on this pickup. Partial jobs like a hood or roof use less film and lower the material part of the cost.

  • Body: pickup (2 or 4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Tasman wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Tasman, first generation, factory photo
Factory color shown

2024–now Tasman pickup (first generation)

2024–nowpickup (2 or 4 doors)

The first generation Kia Tasman, built from 2024 to today, is the only body in this catalog. Its pickup bed is treated as a second body for the film, so the cab and the bed are wrapped separately and the inside of the bed stays bare. The four-door cab has more side glass and a longer roof than the two-door, which changes the upper panel cuts. The bed sides are flat and tall, with a visible seam at the cab gap.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Roof, hood, chrome delete and PPF on a Tasman

A partial wrap on the Tasman covers the roof, hood or mirror caps as single panels. The roof on the four-door cab is long enough to need a full-width film sheet, while the two-door roof is shorter. Tasman chrome delete is done by covering the window trim and badges with black film, leaving the grille and bed hooks optional. Paint protection film (PPF) is a clear film applied to the front end, and it can be cut for the hood edge and bumper corners without wrapping the whole truck.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia Tasman: body, cut-outs and film

A Kia Tasman vinyl wrap is shaped by the pickup body and its two or four door cab. The cab and the bed are wrapped as two separate bodies, so the film order and panel split are planned around the gap between them. The inside of the bed is not wrapped, which leaves the bed liner and tailgate inner face bare. The SUV-class cab height adds side surface compared with smaller pickups, but the straight bed sides are simple to cover.

Tasman wrap ideas start with the cut-outs the installer must handle on every pickup. Door handles, mirrors and the front grille are standard cut points, and the bed rail caps come off to let the film tuck cleanly under them. The cab and bed are wrapped as two bodies, so the panel behind the cab is trimmed at the bed front edge. The tailgate is wrapped as part of the bed body, and the badge recess is cut by hand.

How much vinyl to wrap a Tasman is a single-generation figure, because the first generation has run from 2024 to now. The estimate of 18 meters (59 feet) covers the cab and the bed together and leaves working film for the panel edges. A two-door cab uses slightly less film on the side glass area, while a four-door cab adds door length and B-pillar coverage. The bed size is the same on both door styles, so the bed film stays constant.

Questions about wrapping a Kia Tasman

How much vinyl does it take to wrap a Kia Tasman?

A Kia Tasman needs about 18 meters (59 feet) of vinyl for a full wrap when the cab and the bed are covered together. This figure comes from the film estimate of the 2024–now first generation body. The cab and bed are wrapped as two separate bodies, but the total film is calculated as one job. The inside of the bed is not wrapped, so no film is counted for that area.

Is the bed of a Tasman wrapped?

No, the inside of the bed of a Tasman is not wrapped. The cab and the bed are wrapped as two separate bodies, and the film stops at the bed edges and tailgate face. The inside bed walls and floor stay bare, which is standard for pickup wraps. The bed rail caps and tailgate top edge are the boundary of the vinyl.

Can I wrap only the hood or the roof of a Tasman?

Yes, you can wrap only the hood or the roof of a Tasman as a partial job. The same is true for the mirror caps, which are often done on their own or with the hood. A hood wrap can be a color change or a clear paint protection film (PPF), and the roof can be wrapped without touching the bed. These partial jobs use less film than a full wrap and still need clean cut lines at the panel gaps.

Is a Tasman hard to wrap?

A Tasman is not a hard pickup to wrap, but the separate bed adds more edges and a second set of panel gaps. The cab and the bed are wrapped as two bodies, so the installer has to split the job at the bed front and align the film on both sides. The tall, flat bed sides are easy to lay film on, but the door handles, mirrors and grille need careful cut-outs. The total film size of 18 meters (59 feet) is in line with other mid-size pickups, so the workspace needs room for long bed-side panels.