Wraps by car

Kia PV5 wrap

A Kia PV5 wrap covers the whole body of this electric minivan, of which the catalog lists one generation, the 2025–now line. A full Kia PV5 wrap takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. If you pick chrome or patterned vinyl wrap, allow about 85 ft (26 m) for the job.

1generations22.5 mof film for a full wrap

Kia PV5, first generation, factory photo
Kia PV5, first generation. Factory color shown.

Kia PV5 wrap colors and ideas

  • Kia PV5 black wrap
  • Kia PV5 white wrap
  • Kia PV5 gray wrap
  • Kia PV5 silver wrap
  • Kia PV5 red wrap
  • Kia PV5 blue wrap
  • Kia PV5 green wrap
  • Kia PV5 yellow wrap
  • Kia PV5 orange wrap
  • Kia PV5 purple wrap
  • Kia PV5 pink wrap
  • Kia PV5 teal wrap
  • Kia PV5 brown wrap
  • Kia PV5 gold wrap
  • Kia PV5 chrome wrap
  • Kia PV5 color shift wrap
  • Kia PV5 carbon fiber wrap
  • Kia PV5 camo and patterned wrap

How much vinyl to wrap a Kia PV5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowvan (4 doors)184.8 in (4,695 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Kia PV5 wrap cost factors

Kia PV5 wrap cost is set by film finish, panel area, and how much of the vehicle you cover rather than by a single shop price. A full wrap of the 184.8 in (4,695 mm) van needs about 74 ft (22.5 m) of 60-inch (1.52 m) film, or about 85 ft (26 m) for chrome and patterned material. Jobs like a hood and mirror caps use less film, while any extra disassembly below the surface adds labour time.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (74.8 in (1,899 mm)): the roof is wrapped from a platform.

Kia PV5 wraps by generation

Swipe sideways. Tap a card for the full description.

Kia PV5, first generation, factory photo
Factory color shown

2025–now Kia PV5 van (first generation)

2025–nowvan (4 doors)184.8 in (4,695 mm)

The first generation Kia PV5, built from 2025 to now, is a tall, four-door electric van. Its sliding side doors leave bare tracks that set the natural edge for the film on every wrap job. Because the body is 74.8 in (1,899 mm) high, the roof is wrapped from a platform, and the charge port door is covered as a separate small piece.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (74.8 in (1,899 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Kia PV5

A Kia PV5 chrome delete covers the window trim and badges with black film, while a partial wrap can be just the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film that guards only the front end of this electric van. Each partial job uses less material than a full wrap and leaves the door tracks untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia PV5: body, cut-outs and film

A Kia PV5 vinyl wrap is shaped by the one body style offered: a four-door van that is 184.8 in (4,695 mm) long. The simple, tall sides give the installer long, flat panels to work with. Cut lines follow the edge of each sliding door track, so the film ends cleanly without wrapping into the track.

Kia PV5 wrap ideas start with the sliding side doors, whose tracks stay bare and decide where the film is cut. The electric charge port door is wrapped as its own small piece, then trimmed flush around the flap. The roof is 74.8 in (1,899 mm) up, so a platform is used to wrap it safely.

How much vinyl to wrap a Kia PV5 depends on which generation you own and which film finish you choose. This catalog covers the first generation, in production from 2025 to now, with no other bodies listed. For the 2025–now body, a full wrap in standard cast film is estimated at about 74 ft (22.5 m) of 60-inch (1.52 m) material, while chrome or patterned film runs about 85 ft (26 m).

Questions about wrapping a Kia PV5

How much vinyl does it take to wrap a Kia PV5?

A full Kia PV5 wrap takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned vinyl, allow about 85 ft (26 m) of the same width because the pattern must be matched and waste rises.

Are the sliding doors of a Kia PV5 wrapped?

The sliding doors of a Kia PV5 are wrapped, but their tracks are not. The film is cut along the edge of each sliding door track, so the track stays bare and works as the natural cut line for the panel.

Can I wrap only the hood or the roof of a Kia PV5?

Yes, a Kia PV5 can receive a partial wrap on only the hood or the roof, and mirror caps can also be done alone. Jobs like a roof wrap on this 184.8 in (4,695 mm) van use a smaller piece of film and a platform for the 74.8 in (1,899 mm) height.

Is a Kia PV5 hard to wrap?

A Kia PV5 is harder to wrap than a small car because of its tall body, sliding door tracks, and electric charge port. The 74.8 in (1,899 mm) height means the roof is wrapped from a platform, and the film is cut along the sliding door tracks. The charge port door is wrapped as a small piece of its own, which adds a precise cut-out to the job.