Wraps by car

Kia Telluride wrap

The Kia Telluride wrap covers every body line of this large SUV with a color change vinyl wrap. The first generation runs from 2019 to the present, and the page covers the five-door SUV body. A full wrap of the newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film.

1generations20.5 mof film for a full wrap

Kia Telluride, first generation, factory photo
Kia Telluride, first generation. Factory color shown.

Kia Telluride wrap colors and ideas

  • Telluride black wrap
  • Telluride white wrap
  • Telluride gray wrap
  • Telluride silver wrap
  • Telluride red wrap
  • Telluride blue wrap
  • Telluride green wrap
  • Telluride yellow wrap
  • Telluride orange wrap
  • Telluride purple wrap
  • Telluride pink wrap
  • Telluride teal wrap
  • Telluride brown wrap
  • Telluride gold wrap
  • Telluride chrome wrap
  • Telluride color shift wrap
  • Telluride carbon fiber wrap
  • Telluride camo and patterned wrap

How much vinyl to wrap a Kia Telluride

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)196.9 in (5,000 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

Telluride wrap cost factors

Telluride wrap cost is set by the amount of film and the time to prepare the SUV. A full color change uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film, more if you choose a chrome or patterned film. The tall roof, the tailgate glass cut-out and the large side panels add work hours.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.
  • Restyled in 2021: bumpers and lights differ between the versions, and so do the film cuts.

Telluride wraps by generation

Swipe sideways. Tap a card for the full description.

Kia Telluride, first generation, factory photo
Factory color shown

2019–now Telluride SUV (first generation)

2019–nowSUV (5 doors)196.9 in (5,000 mm)

For the first generation, the 2021 Telluride restyling only touched the front and rear styling. The bumpers and lights are new shapes, so a vinyl wrap kit cut for the 2019–2020 version does not fit the 2021 and newer model. The doors, roof and quarter panels keep the same measurements.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Telluride

A partial wrap on a Telluride can cover just the roof, hood or mirror caps. Chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is clear film applied to the front end to guard the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Kia Telluride: body, cut-outs and film

The Kia Telluride vinyl wrap suits the five-door SUV body with its long, tall sides and wide hood. The body measures 196.9 in (5,000 mm) long and 68.9 in (1,750 mm) tall, so a full wrap needs careful planning around the third side window and the rear pillars. The tall body also means the roof is best wrapped from a platform or step stool.

Telluride wrap ideas start with the parts that need cut-outs or come off the vehicle. The tailgate has the rear glass set into it, so the film ends cleanly at the edge of the glass. Door handles, badges and the shark-fin antenna are removed for a neat finish.

How much vinyl to wrap a Telluride depends on which version of the first generation you have. The 2021 restyling changed the bumpers and lights, so film templates for a 2019–2020 Telluride do not fit a 2021 or later model. Otherwise the body size stays the same for every year of the first generation.

Questions about wrapping a Kia Telluride

How much vinyl does it take to wrap a Kia Telluride?

A full wrap takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast vinyl. That is the figure for the current five-door Telluride body. If you choose a chrome or patterned film, expect to use about 77 ft (23.5 m) because of extra waste.

Which years of the Telluride take the same film cuts?

The 2021 and newer Telluride models share the same film cuts, while the 2019–2020 models have different bumper and light shapes. The restyling in 2021 changed those parts, so templates do not cross between the two groups. All years of the first generation share the same body except for those restyled parts.

Can I wrap only the hood or the roof of a Telluride?

You can wrap only the hood or the roof of a Telluride. A partial wrap often covers the roof, hood or mirror caps on their own. The tall roof is wrapped from a platform or step stool for safe access.

Is a Telluride hard to wrap?

A Telluride is not hard to wrap, but its size and a few details add work. The tailgate has the rear glass in it, so the film must end at the edge of the glass without lifting. The tall body (68.9 in (1,750 mm)) means the roof is reached from a platform.